HT1476 My phone dies at 20% now all the time what do I do!?

My iphone 5 keeps shutting off at 20 percent and then turns back in

Hi Khorwitz25!
I have an article for you that can help you troubleshoot this issue with your iPhone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Similar Messages

I have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?

i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?

Kidcomeleon wrote:
i have got an iphone 3g and when i got it it was jailbroken so i went to restore it but it failed now it says i need to plug it into itunes all the time. what do i do?
Plug it into iTunes.

This ios7 is the worst thing that can happen to apple phones . My phone is hanging all the time what should I do .

This ios7 is the worst thing that can happen to apple phones . My phone is hanging all the time what should I do .

Back up your iPhone and restore from backup. If that's does not help, restore your iPhone as new (not from backup).

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

The home button for my ipod touch 4th generation does not respond all the time, What do I do?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My iphone gets overheated all the time, what's wrong????

My iphone gets overheated all the time. Tips? Solutions?

Hello User99999999999010
If you are having issues with your iPhone getting hot, the article below will give you some insight on the matter. Also check to make sure you do not have any apps running in the background that could cause the phone to run even when the iPhone is asleep.
iOS devices: Keeping device within acceptable operating temperatures
http://support.apple.com/kb/ht2101
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Kernel panics all the time - what is the reason?

during the past few month (must be 3 or 4) I've get kernel panics all the time. there are no specimen programs open. sometimes I've get the kernel right after the start. it is very frustrating because apple couldn't help me so I hope someone know what these panic log means (these are only the three last one):
Kernel version:
Darwin Kernel Version 8.2.0: Fri Jun 24 17:46:54 PDT 2005; root:xnu-792.2.4.obj~3/RELEASE_PPC
Wed Oct 19 22:59:44 2005
panic(cpu 0 caller 0x0003FE9C): zalloc: "kalloc.4096" (12781 elements) retry fail 3
Latest stack backtrace for cpu 0:
Backtrace:
0x00095544 0x00095A5C 0x0002683C 0x0003FE9C 0x0002BB0C 0x002F7604 0x005E423C 0x005D77C8
0x00614F6C 0x00613714 0x00946620 0x005D0DF8 0x002CDC64 0x005D0B3C 0x00946484 0x002BCC70
0x002BCA38 0x002BD4A0 0x002BDB0C 0x000A9694
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.CSRUSBBluetoothHCIController(1.6f2)@0x945000
dependency: com.apple.iokit.IOBluetoothFamily(1.6.2f4)@0x5cf000
dependency: com.apple.driver.AppleUSBBluetoothHCIController(1.6f2)@0x612000
com.apple.driver.AppleUSBBluetoothHCIController(1.6f2)@0x612000
dependency: com.apple.iokit.IOUSBFamily(2.2.0)@0x454000
dependency: com.apple.iokit.IOBluetoothFamily(1.6.2f4)@0x5cf000
com.apple.iokit.IOBluetoothFamily(1.6.2f4)@0x5cf000
Proceeding back via exception chain:
Exception state (sv=0x2D817000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.2.0: Fri Jun 24 17:46:54 PDT 2005; root:xnu-792.2.4.obj~3/RELEASE_PPC
Thu Oct 20 00:31:58 2005
panic(cpu 0 caller 0x0003FE9C): zalloc: "kalloc.2048" (25782 elements) retry fail 3
Latest stack backtrace for cpu 0:
Backtrace:
0x00095544 0x00095A5C 0x0002683C 0x0003FE9C 0x0002BB0C 0x002FD384 0x002FD4F4 0x002B69C4
0x002BDFEC 0x002BE0BC 0x005D0D08 0x005D0370 0x002BC618 0x002BD4A0 0x002BDB0C 0x000A9694
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOBluetoothFamily(1.6.2f4)@0x5cf000
Proceeding back via exception chain:
Exception state (sv=0x24533500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.2.0: Fri Jun 24 17:46:54 PDT 2005; root:xnu-792.2.4.obj~3/RELEASE_PPC
Thu Oct 20 19:58:08 2005
panic(cpu 0 caller 0x0003FE9C): zalloc: "kalloc.256" (52256 elements) retry fail 3
Latest stack backtrace for cpu 0:
Backtrace:
0x00095544 0x00095A5C 0x0002683C 0x0003FE9C 0x0002BB0C 0x0006D8A0 0x0006E51C 0x002E67FC
0x002E6B30 0x0008B0FC 0x000291C0 0x000233AC 0x000ABE2C 0x01B13D40
Proceeding back via exception chain:
Exception state (sv=0x27F29A00)
PC=0x9000A738; MSR=0x0000F030; DAR=0x0B7C3000; DSISR=0x42000000; LR=0x9000A67C; R1=0xBFFFE210; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.2.0: Fri Jun 24 17:46:54 PDT 2005; root:xnu-792.2.4.obj~3/RELEASE_PPC

I have had the same issue since I got my Powerbook (1.5GHz). I'll tell you what I have tried, but it looks like Apple is going to just have to either replace the logic board or the whole computer itself.
Since the very beginning I suspected the graphics card. I really don't know how to decipher the panic.log, but I see NVDA and Graphics repeated a lot in the log. Regardless, I tried every troubleshoot out there, but nothing worked. I reset PRAM, did both hardware tests, fixed permissions, I even erased my hard drive and reinstalled both from the install disk, then from a different OS 10.4 disk. I did an archive and install, a journaled erase, and a complete erase of my hard drive. I even reset the Airport card. I called Apple care and they basically wanted me to do the same things I had already done, so I just took it into the Apple store for repairs. The company they contract their work out to (Flextronics International) did not do any extensive diagnostics, they simply replaced a flex cable between the hard drive and the logic board. I got it back and within a week the kernel panics started again. I took it back in and this time they (Flextronics) reset the Airport card, which made absolutley no sense. I know a loose Airport card causes kernel panics, but by this point they should have done much much more than that. I have been struggling with this for over a month and Apple wants to try one more repair before replacing the computer. It has been extremely frustrating dealing with Apple technical support and customer relations. I haved been extremely patient with them, but at this point I just feel like they have wasted too much of my time on this issue that could have been resolved if they contracted their work out to competant companies.
So like I said. Good luck on getting it fixed. You may be having a different problem, but I tried all the troubleshooting that is recomended to consumers and more, yet my Powerbook is still getting kernel panics. At this point I am just trying to get Apple to fix the problem once and for all. And I think that will involve a new logic board or a new computer.

HP Pavilion zv5330us had intermittent power connection now all the time- jack or heatsink?

The zv5330us cannot get a good enough connection to remain on to complete full boot. I need diagrams to locate the power jack and heat sink, CPU, or do I? Replacing the battery didn't do a bit of good as the power isn't getting to the charging unit nor will it power on with DC Adaptor alone anymore. This grew steadily worse. Is there a source for tech specifications so I can replace these parts if I need to, and what about the CMOS battery? Is it replaceable?

Connected the power source - the blue zigzag-LED power light is on in front - no error codes. I will leave it in powered state to try and charge the battery a bit before proceeding in a few hours while I copy the drivers to a CD with the correspondent instructions in Word. This older laptop had a CD read-writer but not the newer DVD writer, I think.... So many devices, it is hard to keep them all straight. Maybe another suggestion for a forum - how to keep all your devices straight with this software product >>>>>>> as yet unnamed <<<<<<<. Since cables and components bridge the gap between manufacturers, with small mods, it helps to get the consolidated listing of all components when you buy the things new.. HP had such a while ago and of course, I copied it onto said laptop, Pavilion zv5330us - which is, of course, the zv5000 family, unless HP broke ground with the 5300 devices - it would be lovely to see a matrix or historical exposition of how these evolved. Sometime I think it would be better to have all the hard drives in a tower, accessible by remote, and for that I bought an HP USB drive, which had its hiccups. Wonderful article "Cloud Services Showdown" in Maximum PC magazine, Vol 17 no 05, May 2012, comparing Google, Amazon, Microsoft, and Apple's iCloud on page 38. They didn't look at the HP or Linux or other commercially offered remote access to your data, nor other options in this article, just the Cloud-type services by the big 4 - but that is another Topic.

Page outs going crazy for basic tasks - Mac stalls all the time - what's up?!

Hey, guys. So I have no idea what the problem is. Basically my mac is just going extremely slow and stalling sometimes for the most basic tasks. Mail, Safari, iTunes. It's a late '09 model, basic.
Check this out:
[IMG]http://i44.tinypic.com/2ewkri1.png[/IMG]

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

My i-Phone 4 gives enlarged screen all the time

suddenly my phone gives not the whole screen but partial....

This is asked and answered many times, including once just minutes ago and it is covered in the manual ( Zoom feature>
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Double tap with three fingers.

I have the volume icon now all the time right in the middle of my screen

Hello, I have an ipod touch 3rd gen and I have a problem. Suddenly the volume icon is smack dab in the middle of my screen a;ll the time. The volume button , top one also turns on and off my ipod touch the lower one does nothing. Can anyone help me with this please, it is very annoying. Thanks for reading my message. have a great day. macsambo

Have you tried restarting or resetting your iPod?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPod shuts down, press the On/Off button and hold until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

After new update firefox grays out all the time; What do I do?

Plus it is just not responding, freezing when I type, pausing often. I have nothing conflicting running, to my knowledge and the blued e works fine.
This has happened since which ever last download you all sent over.
Oh so it is both hanging and crashing, and delaying even as I type this.
If I recall it said another program of firefox is running and I would have to shut down to start a new one
Thanks, Dlyn

What is "shorting out"? Shorting usually refers to an electrical problem.
You need to provide more info on your problem.
 Cheers, Tom

My macbook pro works fine until i try to get my e-mails, it comes up saying server error all the time what is wrong

macbook pro works fine except when i try to get my e-mails it say server error, what is wrong

You need to provide more info please. What's the exact error? What email client? Who's the email account through? When the last time your email worked without issue? Do you remember something changing right before it stopped working?

The transport request is running all the time, what is the problem

I have a transport request which can transport from DEV to QAS successfully ,but failed when the request transport to PRD, I found the request running for several hours. I do not know what the problem? how can I check this problem?
need your help thanks

Hi
The background job Rddimpdp is not scheduled in the system for client 000...And you want to investigate what happend to the job..
The background job details are kept in table TBTCO..So if you goto SE16 and try to choose the fields which are of your interest..as it(this table) has lot of fields. And in this we have fields like last run time,scheduled by,last job change time etc.So with the above information i hope you will be able to get the information you want.
And if everything is fine ..the backgrouns job alone can vanish someone manually might have done done something ..and that can be found out by above investigation on the table.
Hope this info helps...
Regards
Vani

HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time

my device was updated and now is not working anymore, it is in recovery mode all the time.
what can i do???

Delete the shortcut you have at the moment and then create a new one as follows: 
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox. 
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)''' 
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

Blackberry restarting all the time !

I have had. A blackberry now for atleast 10 months and it is so annoying when you accidently nock your phone and it restarts all the time what should I do !

I've answered in your other thread where you posted.
Re: Curve keeps overheating and draining battery
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1476 My phone dies at 20% now all the time what do I do!?

Similar Messages

Maybe you are looking for