HT1481 bought new shuffle but mac does not see it why not?

bought new shuffle but the mac does not see it in itunes please tell me why?

My battery is not quite flush, but I use mine on soft surfaces (as I'm not supposed to), so I haven't noticed any rocking. Have you tried taking your battery out and trying to get a better fit?

Similar Messages

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

TS3989 New MacAir but photostream does not work. Message though everything is on. "In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences." And,

New computer but Photostream does not work. I am signed into my account but get the following message: In order to use Photo Stream, you have to be signed into your iCloud account in System Preferences. I go to system preferences and then get a message that says that my account cannot be accessed. However, I am using my icloud account for email and other items and it works fine. Any thoughts?

Are you getting this messages in iPhoto? If so try the following (again?):
Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane. Then log back in and re-enable, respectively. That should jump start Photo Stream.
OT

I can create a New Folder, but it does not appear under my 'Inbox'.

I have made sure that under 'View', that my bullet is next to show 'All' folders. I make the new folder to show up as a subfolder of my inbox, but it does not appear. I try to do it again and it states that one already exists????????????????????????
I cannot figure out what is Wrong!!!!!!!
Jackie

OMG - thank you for your help!!!!!!!!!!!! I did not realize that the inbox folder was collapsed and not expanded. The new folders I made are there!
THANK YOU!!!!!!!!!!!!!!!!

I need to download my PS8 to my new computer but it does not have a disc drive

I just bought a new computer without a disc drive and I need to load my Photoshop 8 on it but I only have the original PH8 CD. How do I do this?

if you mean pse 8:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
if you really mean ps8:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I changed my Apple ID and put new password but itune does not accept ? those and insists using old ID and password

I changed my Apple ID and put new PW. When I go to itunes and want to purchase some App it gives window with
old user id and asks for password. I does not accept new password because it is not associated with this ID. I wanted
to make the same user ID as Apple and also the same password but I do not know how it can be done. The old ID and old password must be on Apple site
and there must ba way to delete them.?

Tap on your id in Settings > Store and log out of the account and then log back in with the updated version so as to 'refresh' the account on it.

PRINTER C7280, NEW CARTRIDGE BUT PRINTER DOES NOT RECOGNISE NEW LEVEL, LEVEL/GAUGE STAYS 0

I HAVE C7280 PRINTER ALL IN ONE, WITH 363 CARTRIDGES. THE COLOR 363 LIGHT CYAN HAS BEEN REPLACED, BUT LEVEL OF NEW CARTRIDGE STAYS 0. BOUGHT AGAIN A NEW ONE, BUT PROBLEMS STAYS. DID CLEANING OF THE HEADS AND ALIGN PRINTER, BUT PROBLEM STAYS. HOW CAN I SOLVE THIS?

Hi
Are you using the control panel or solution centre to check the levels?
Are you still able to print?
Thanks, Ciara
Step one: Check ink levels
NOTE:
The HP All-in-One can only detect the ink levels for genuine HP ink. The ink levels in ink cartridges that are refilled or have been used in other devices might not register accurately.Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used.
To check the ink levels from the control panel:
Press Setup .
Press the down arrow ( ) to highlight Tools, and then press OK.
Press the down arrow ( ) to highlight Display Ink Gauge, and then press OK.
Press any button to return to the Tools menu.
To check the ink levels from the HP Photosmart Software:
In the HP Solution Center, click Settings , point to Print Settings, and then click Printer Toolbox .
NOTE:
You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Services tab, and then click Service this device .
Click the Estimated Ink Level tab. The estimated ink levels for the ink cartridges will appear.
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

New contact on mac does not sync with iphone via iCloud

I created a contact on my mac and it does not sync with iphone via icloud

Contacts added to On My Mac don't sync, add it to the iCloud account, on your Mac.

Bought new iphone but it is not sycn the recent

bought new i phone it went back to old stuff not the new an i had back up the pld phone the day before

What?

I just bought the new iPhone, but it does not sync to my Macbook iTunes because it says I need at least a 10.6.8 software update. My computer is stuck on 10.5.8, however, and my laptop does not say that there are any software updates available.

I tried researching it online, and I think that my computer might be too old to get new software updated on it - I bought it either in 2007 or 2008. I just think that it seems unfair that I have to buy a whole new computer just to put my music and other things on my new iPhone. What should I do? I can't even buy the software update for Mountain Lion because it requires you to already have a 10.6 and I only have a 10.5.8. This is the most frustrating thing ever!

Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

I installed a new font but it does not appear in Pages

I installed a new Font called "FOLK" it appears in the FontBook application but when I launch Pages and try to use it I do not see the font in the list. What gives?

No problem here under 10.7.2
Yvan KOENIG (VALLAURIS, France) dimanche 20 janvier 2011 14:21:10
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Got new Ipod, but Mac will not see it

I just got a used Ipod from my friend (it works). I was trying to update on my PC,but then decided to go use it on my Mac.
I downloaded the Ipod updater and it says each time to plug in the Ipod..It is..The Ipod just shows an icon of it being plugged into a wall electric socket. What can I do to get my Ipod to show up , do I can update it or make it reformatted or new..
Thanks

He means 2G like Second Generation (Scroll-wheel) iPod, not the 2 GigaByte Nano. Yah, confusing.
I'd have to agree with Colin, however - if iTunes works, it maybe an iPod thing. If nothing else, try trashing iTunes and iPod preferences file. (~/Library/Prefernces/com.apple.iTunes.plst & com.apple.iPod.plst). That's the library in your user folder. Note that there's an iPod Pref file in the "Macintosh HD/Library/Preferences/" folder too. Find those files, and move them to the trash. Open iTunes, connect iPod, and make sure everything works - iTunes will regenerate the preferences files, although you'll have to re-adjust the preferences yourself in iTunes.
-Dan

HT201407 help i am trying to activate my new iPhone but it does not want to activate and att cannot get it to activate and iTunes wants me to pay $19.99 to activate my phone come on people this is ridiculous

Can someone please tell me how to activate my new iPhone. I bought it from the at&t website and they are no help.

I have owned every iteration of iPhone there is, and Apple has NEVER charged for activation. What on earth are you talking about here? Describe your problem in more detail.

My car has an auxilliary port for my ipod and I bought a connector but it does not work

Not sure if it is the Ipod or the connector (both ends of the connector fit correctly)

Cane SGE2000/P and SGE2010/P really coexist in a stack?
According to Cisco’s website coexistence of SGE2000/P and SGE2010/P in a stack is possible.I have read all availably documentation and tried every ting I cane thing of. However I have not been successful in connecting these devises.
Is there anybody out there who has a stack with both 24 and 48 port SGE devises? I f there is what software version(s) is there installed on the devises?

My ipodmy ipod shuffle 4th gen does not play whole songs, only parts then goes on to next song

My recently bought ipod shuffle 4th gen does not play whole songs synced to it, only the beginning then goes on to the next song. What have I done wrong?

I changed the iPod to Disk mode and it just blinks orange while it is connected to the PC. It says that it is synched on the PC screen but I thought the blinking orange light means that it isn't. I took it back out of disk mode. The original problem still exists...when I turn it on, the green light stays lit for 5 seconds then there's no light at all....when I press play the lights alternate orange and green indicating no music is loaded which is wrong since it shows all my songs that are loaded when it is connected to my PC. What a mess.

HT1481 bought new shuffle but mac does not see it why not?

Similar Messages

Maybe you are looking for