HT1491 Some Nights by Fun. still has a swear word in it even though I bought the non-explicit version?
My son bought Some Nights by Fun., the non explicit now 83 version, but it still has one swear word in it that shouldn't be there. Any answers as to why this happened?
iTunes Store staff members do not participate in these forums, and even if they did they would not know why a non-explicit version stil has objectionable content. All they could tell you is that it's the record company that provides the track, and every company, and sometimes different people within a different company, has a different idea as to what "explicit" means, and so such content can vary. Or they may have just missed that word during the editing process.
As tonefox said, report it to the iTunes Store.
Regards.
Similar Messages
-
MacMail has stopped noting when I have read an email. For example, I had 17 unread messages, so I read them. Despite me having read them AND deleted them, the inbox still has 17 new messages displayed. Can anyone help resolve the incorrect display?
Lord K. Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it. It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me. My messages were in folders for a lawsuit. It is going to take an incredible amount of work for me to, you have no Idea. We are talking thousands of pages! I the defendent will have them during discovery so I am not so worried. However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part. THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com
-
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
On holiday in Spain, my phone wont connect to wi-fi at my friends apartment but connects to some wi-fi locations in the city. The rest tells me that " Unable to join the network" even though i know the password is correct and my ipad is connected.
I have tried resetting network connections and switching on/off wi-fi, and also reset using home and top button, still nothing.Try going to the Wifi settings and clicking the little arrow next to your network, and click "forget this network" then try re-connecting. If that doesn't work, try going to settings-general-reset and clicking reset network settings. Also, make sure you have your network password correct if there is one.
-
I have moved everything from my macbook pro onto my iMac. For some reason I cant see any of my music in iTunes even though I have logged in with my normal apple ID. Please help me before I kill something!!
How did you go about transferring your library onto the iMac? There are specific instructions one must follow to do this correctly without causing loss of data. Simply signing in via your Apple ID won't do much of anything unless you are an iTunes Match subscriber.
Did you just copy the entire iTunes folder over? If so, Quit iTunes then hold down option and click the iTunes icon in the Dock. Don't release option until the popup appears asking if you want to create a new library. Simply navigate to the library in the folder you copied over.
If you didn't go about transferring your library in that way, and you still have the MacBook Pro, follow these instructions to transfer your library properly to avoid data loss.
Hope that helps! -
Apple automatically charged me for an iCloud upgrade on a device I do not own anymore or know of the current owner. Even though I deleted the device from my account I was still charged for a device I do not have anymore. It's very difficult to get to talk to anyone from support. How can I be refunded?
Yes, assuming they are currently on the computer.
If the iPhone has been used as designed, contacts are either in a supported application on the computer or are synced to a cloud service.
Pictures would be copied to the comptuer regularly and then those desired to be on the device would be synced back. -
Why even though I mentioned the direction as 2; still, its posting OUTBOUND
Hi Experts,
I wanna to POST the IDOC INBOUND, so , I hv mentioned the direction as 2 in control rec. and passed the all sender & receiver info.
So, I tried to post it from WE19, but, am getting as OUTBOX - OUTBOUND in WE05
Why even though I mentioned the direction as 2; still, its posting OUTBOUND??
thanqthanq
actually, i tries all combinations.
this is my code of other thread,
Hi Experts,
The Following is simple code for CREATION of Transfer Order-TO IDOC creation and its POSTING, for the purpose of that, the corresponding TO shulod be CONFIRMED.
The Issue: NOTHING is happening, I mean NO CREATION and NO POSTING,
so, request u that, let me know
1-Why not creating? not posting?
2 - correct the code or suggest some ideas.
Fill Control Record Information
control_record_in-direct = '2'.
control_record_in-mestyp = 'WMTOCO'.
control_record_in-idoctp = 'WMTCID01'.
control_record_in-rcvprt = 'KU'.
control_record_in-rcvpfc = 'AG'.
control_record_in-rcvprn = '456783'.
control_record_in-rcvpor = 'GENTRANP02'.
control_record_in-sndprt = 'LI'.
clear control_record_in-sndpfc.
control_record_in-sndprn = '2000'. "SAPDEV100
control_record_in-sndpor = 'SAPDEV'.
SORT idoc_data BY docnum segnam.
READ TABLE idoc_data INTO edidd WITH KEY segnam = 'E1EDL20'
BINARY SEARCH.
IF sy-subrc = 0.
Fill Header Output Data
SELECT SINGLE sammg FROM vbss INTO fs_hdr_data-sammg
WHERE vbeln = edidd-sdata.
fs_hdr_data-tanum = edidd-sdata.
ENDIF.
Fill the Administrative Section of the Data Record
fs_int_edidd-segnam = 'E1LTCOH'.
fs_int_edidd-sdata = fs_hdr_data.
Append the EDI Header Record Data to the IDOC
APPEND fs_int_edidd TO int_edidd.
CLEAR fs_int_edidd.
Detail Record
Fill Detail Output Data
LOOP AT idoc_data INTO edidd.
IF edidd-segnam = 'E1EDL24'.
CLEAR wa_e1edl24.
wa_e1edl24 = edidd-sdata.
fs_itm_data-tapos = wa_e1edl24-posnr.
fs_itm_data-nista = wa_e1edl24-lfimg.
fs_itm_data-altme = wa_e1edl24-vrkme.
SELECT SINGLE meinh INTO fs_itm_data-altme
FROM marm
WHERE matnr = wa_e1edl24+6(18).
ENDIF.
ENDLOOP.
Fill the Administrative Section of the Data Record
fs_int_edidd-segnam = 'E1LTCOI'.
fs_int_edidd-sdata = fs_itm_data.
Append the EDI Header Record Data to the IDOC
APPEND fs_int_edidd TO int_edidd.
CLEAR fs_int_edidd.
ENDLOOP.
thank you -
I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.at various times it asks different passwords.
Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.
-
Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives. -
Even though I have the Pages 5.0.1 installed as the default software, I still receive the message “You need a newer version of pages to open this document.” HELP!
Please clarify....
Mac OS X (10.4.6)
What your system profile shows yet, you posted in the ML forums. -
I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.
-
Users still able to sign into Lync 2010 even though their Lync accounts are disabled
I have 2 users who are still able to sign into Lync 2010 even though I disabled their Lync accounts. They no longer show up in the Lync console or when you use get-csuser. Their Lync account were associated somehow with their AD accounts in an old domain
that we just decommissioned. I wanted to delete Lync accounts and recreate to see if that fixed their issue. After deleting the Lync account, they are still able to login. So, I guess I need to edit the Lync database to get rid of them and start fresh?.
HDLHi Winterthur,
Agree with Tek-Nerd,
this user certificate is valid for a period of 180 days, and is automatically renewed one month prior to expiration regardless of whether the user is connected internally or externally.
Jeff Guillet’s article Disabling a User in AD Does Not Disable the User in Lync provides
a good background about revoking this certificate and properly disabling the user from accessing Lync services when their Active Directory user account is disabled.
For more details,
http://blogs.technet.com/b/nexthop/archive/2012/11/28/lync-2010-client-authentication.aspx
Best regards,
Eric -
How much iphone 4s wifi chip cost?Still my 4s wifi is not working even though I already updated it to ios7. Thank You!!!..
You cannot replace just the chip. If all of the various solutions suggested in Apple's support documents and here in these forums do not help, you will need to 1) take or send your iPhone to Apple for replacement, 2) pay to have an unauthorized third-party shop attempt repairs, or 3) attempt repairs yourself. The latter two options will void any further support from Apple.
Regards. -
my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network? -
I can't get my new Macbook to allow me to sync and still keep my phones existing iTunes library. Even though it is the same account it doesn't seem to recognise that my Apple ID is the same
If youre like me, I have so many Apple devices, I always move things over manually rather than remember what to sync and what not to sync........ There’s an option to UNCHECK sync on any device if that helps you in ITUNES.
On any device, like your phone, in ITUNES you can check the option for manual vs. automatically sync.
Maybe you are looking for
-
I know how to transfer a movie from iMovie to the Media Browser, but how do I then transfer the movie from the Media Browser to iTunes for adding to the movies collection on my iPhone?
-
Mail, how can you remove an image that shows up in the header?
I have no idea how this image got where it is, but I would like to remove it. When I open Mail, I see in the address area of the email as it displays in the message viewer, to the very right of that area, there is an image, that I have no idea how it
-
I don't know what the problem is. I have windows 8. It has crashed 4 times trying to submit this to you.
-
OS10.9.5. MBP i7. In the top bar the Applescript Icon (the "S")is not working properly. When I click it, it should look like this: But looks like this about 98% of the time I acces it. Any idea as to how to fix this? Thanks.
-
Looking for a soundmax that supports my computer hardware...
Like the title says, I turned on my computer this morning and a message popped out that my Soundmax didn't load properly and needed to reinstall it. So I go to unistall a program in control panel and in my lack of knowledge in computers made me unins