HT1491 Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?

Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari

Similar Messages

  • What does "unknown error has occurred mean when trying to login to the app store

    what does "unknown error has occurred" mean when trying to login to the app store

    Welcome to the Apple forums.
    Good idea to fill out your profile so people can see what machine you are writing about.    
    Also a good idea to do a little research through the 'More like this' panel to the right of your initial post.    Each of the threads also contains more leads so it is amazing how much you can learn from them.
    Good hunting.

  • I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch.  I have done this numerous times, but today I got an error message saying the required file cannot be found.  At the same time all of my photos on my iPod vanished.  Can anyone help me?

    Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

  • What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found:  /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

    When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

    It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder.  You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again.  This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do.  The article on how to do this is here. (http://www.apple.com/macosx/recovery/)  I have had to do this before and it works like a charm.  It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

  • What does this error message when I try to do updates mean? And how can I fix it? Thanks.   The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    What does this error message when I try to do updates mean? And how can I fix it? Thanks.   (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    James
    maverick 10.9.1

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • What does this error message mean? disc recording not found

    What does this error message mean? disc recording not found

    Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • TS1846 What does this error message mean?

    What does this error message mean? I am trying to burn a project to DVD...
    Formatting was not successful.  Layer 0 exceeds the maximum layer size allowed.  Please choose a suitable marker location that will support this condition.

    The project is 1:22:30  - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

  • What does this error message mean?  MFMessageErrorDomain error 1028.

    What does this error message mean? 
    MFMessageErrorDomain error 1028.
    I can't seem to delete a message from my mailbox.  The above error message comes up every time and the message then reappears in my inbox.

    Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
    From the Mail menu bar, select
    Mail > Preferences > Accounts > Advanced
    From the menu labeled
    Keep copies of messages for offline viewing
    choose
    Don't keep copies of any messages
    Close the window and save the change. Relaunch Mail and test.

  • HT3529 what does 2127 error message mean?

    what does 2127 error message mean when trying to send a text??

    "...usually the 2127 invalid destination indicates that you should check your number and try again.  It could be if number sending to has text blocked, a network issue, or not sending to a full 10 digit phone number...if you are sending text to a contact in your phone make sure contact saved has all 10 digits with area code save and also in contact make sure saved as a mobile number and not a home number..."

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • MacBook Woke Up By Itself - What does this error message mean?

    My MacBook woke itself up today. First time this has happened to me. I can see from the Console Log that it's due to a USB disconnect, but I can't see anything that's disconnected. Everything appears to be working, so I'm not sure what's up. Here's the log snippet. Can someone tell me what the error codes mean?
    6/4/10 1:18:00 PM kernel Wake reason = UHC4 EHC2
    6/4/10 1:18:00 PM kernel System Wake
    6/4/10 1:18:00 PM kernel Previous Sleep Cause: 5
    6/4/10 1:18:00 PM kernel USB (EHCI):Port 1 on bus 0xfa connected or disconnected: portSC(0x101803)
    6/4/10 1:18:00 PM kernel An Unknown USB Device (Port 1 of Hub at 0xfa000000), may have caused a wake by being connected
    6/4/10 1:18:00 PM kernel The USB device IOUSBWirelessControllerDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by being disconnected
    What does Wake reason = UHC4 EHC2 mean? I can't find a meaning for UHC4 and EHC2 online.
    Also, Based on the description "IOUSBWirelessControllerDevice" sounds like it would have something to do with the wifi on my MacBook, but that appears to be fine. Any ideas on what hub 0xfa is? Is that an internal USB connection? Any ideas where "Port 1 of Hub at 0x1a000000" is located?
    Thanks again

    6/4/10 1:18:00 PM kernel An Unknown USB Device (Port 1 of Hub at 0xfa000000), may have caused a wake by being connected
    6/4/10 1:18:00 PM kernel The USB device IOUSBWirelessControllerDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by being disconnected
    This is the part that matters.
    Unfortunately, a number of the MacBook's internal components (keyboard, iSight, USB ports themselves) are on the same USB bus. This means if any one of these components is disturbed somehow, the machine may wake from sleep. As far as I know, there is no easy way to figure out which specific device woke the machine.
    Be sure to disconnect all external devices, and try turning off Bluetooth, to see if the computer continues to wake from sleep.
    ~Lyssa

  • TS1702 0xE8000004-what does this error message mean?

    0xE8000004-what does this error message mean?  I get it when trying to sync my Garmin USA app.

    See http://support.apple.com/kb/TS3221.

  • What does this error message mean ?

    I put in a CD-R of uncopywritten music. Previously it has come up like any other CD; i.e. iTunes opens and asks me if I want to import the songs. Now for some reason I get an error message that says "You have inserted a disk containing no volumes that Mac OS X can read. To continue with the disk inserted, click ignore". When I click ignore, I can't find the disk anywhere. The CD-R plays fine on my home stereo CD player, I'd like to be able to make a copy using iTunes, which I have done with this disk before. What to do ?
    imac G5   Mac OS X (10.3.9)  

        StephAnnDLC, thanks for posting. Are you still having issues with the videos? How about the battery issue? Have you tried this http://bit.ly/102vuCF and retested?^SP

  • HT3702 Anytime I try to make an in app purchase only for master of dragon it says cannot connect to iTunes Store. I have don't it multiple times recently and all of a sudden it has not let me purchase anything.

    I cannot make anymore purchases on an app I have downloaded (master of dragon). It just started happening when I changed my cc payment information. It says sorry cannot connect to iTunes Store. And says cannot connect to itunes store(0). Please tell me what am I to do.

    rockyboy223 wrote:
    I thought the question was implied.  How do I get this fixed so I can make the in-app purchase?
    By doing exactly what it said to do and what you have alrready done:
    "Please contact Itunes Support to complete this transaction"
    This is an issue with itunes support.  You have done all you can do

  • HT203175 I still can not access my iTunes store. I have done everything, but still nothing happen. What do I do now?

    It is flipping impossible for me to access my iTunes store. I have read and done everything and it still will not let me access it. I am very disappionted with iTunes. How do I fix this problem?

    It is flipping impossible for me to access my iTunes store.
    Could you walk us through what happens when you try to access the store please, Alicia?

Maybe you are looking for

  • Upgraded to FCP 6.0.2 - now projects won't open

    I recently installed the update, actually last week, was gone for a week, come back to begin work again and none of my projects open, FCP just quits, no error, no nothing. It just shuts down. Anyone have any ideas?

  • ITunes Radio Purchase Missing from iPhone w/Match Enabled

    I recently purchased Usher's 'Scream' while listening to iTunes Radio on my iPhone 5. Purchase went through successfully, but when I try to download it locally from the iTunes store app on my iPhone the download appears to complete but it never appea

  • Need advice about how to set up a NBA finals spreadsheet.

    Hi everyone, Some friends and I are playing a version of the Over/Under game during the NBA finals. My wife, being the geek she is, set up our score sheet in Numbers. Here's a screen shot of it: What we're looking for is a more elegant way to set thi

  • BEx queries hitting aggregates

    Hi Gurus,     Is there anyway we can findout queries hitting aggregates. I mean any table where we can check which queries have ran by pulling the data from aggregates rather than cube. Thanks in advance. Gurantee of award points. Regards Baba

  • Unable to update to 4.1. - Problems with purchases

    Hi Folks, when trying to update to 4.1 Itunes keeps telling me that there are still purchases on my iPhone 3G that have to be transferred to my library. If I right click on my iPhone and choose "Transfer Purchases" nothing happens. Can you hekp, plea