HT1495 More then one iPad being used.

We have more then one iPad. Can we use one iTunes account so I do not have to buy games and songs more then once? Also, 3 people are on one iTunes account. How do we avoid our iMessages being shown on each device?
Thanks.

Yes, you can run as many devices as you want from one iTunes account. To avoid having messages sync across all devices, use different email addresses for iMessage.

Similar Messages

How to config the digital write-to-line so it would independent when more than one is being used

when one digital wirte-to-line is used in the labview vi, a good logic high(5v) can be read using a voltmeter,but when two or more digital write-to-lines are being using at the same time,the logic high seemed to have split voltages and thus having a bad logic high.how to make sure that in the labview program,that when many digital write-to-lines are used at the same time,all of them can abtain a good logic high (around 5v).
I need the solutions urgently.
grays
np

Hello,
The probable reason you are seeing the behavior you are is due to a reconfiguration of the digital port. The Write to Digital Port VI is setup to configure the entire port, then write to one line (default settings). If you reconfigure the port it will reset all the lines, and then write your new value. You will want to use the iteration input on the Write to Digital Line so you can avoid the reconfiguration issue.
The first time the Write to Digital Line is executed in your code wire a 0 to the iteration (or leave it unwired). This will configure the port for write and write your first value. The next time you use the write to digital port VI wire an integer greater than 0. This will bypass the configuration step and simply write the new value to the
line. You can open the Write to Digital Line VI to see how the iteration input effects the execution and configuration of the digital ports.

Creating more then one JMS Destination using MBeans

Hi all,
I am trying to create 2(or more) JMS Destinations (Topics and Queues) in a JMS Server.
The code looks like:
MBeanHome home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
ServerMBean srvrMBean = (ServerMBean) home.getMBean("examplesServer", "Server",
"examples");
JMSServerMBean jmsServer = (JMSServerMBean)home.findOrCreateAdminMBean("examplesServer",
"JMSServer", "examples");
jmsServer.setStore(jmsStore);//jmsStore is JMSJDBCStoreMBean obj
jmsServer.setTargets(srvrMBean);
JMSDestinationMBean jmsTopic1 = (JMSTopicMBean)home.findOrCreateAdminMBean("tempTopic1",
"JMSTopic", "examples", jmsServer);
jmsTopic1.setJNDIName("com.temp.topic1");
jmsServer.addDestination(jmsTopic1);
and the second one is added as:
JMSDestinationMBean jmsTopic2 = (JMSTopicMBean)home.findOrCreateAdminMBean("tempTopic2",
"JMSTopic", "examples", jmsServer);
jmsTopic2.setJNDIName("com.temp.topic2");
jmsServer.addDestination(jmsTopic2);
(Actually, the Topics are added to the jmsServer in a method)
I can see in the console that the first topic is added to the JMS server and to the
JNDItree of the server instance,
But for some reason, the second topic is not added to the JNDI tree(but it is added
to the JMS Server).
and I can not look up the second object in JNDI.
Does anybody come across this problem??
what is the right way to add the destinations??
thanks for any help
-Vijay

Hi Mihir,
thanks....I tried the same program, but the only difference is i am setting the targets
to the jms server (i.e. jmsServer.setTarget(tm);) before adding second destination
to it(i tried both setDestinations and addDestination).
Because, (according to my requirements) after adding the first destination i have
to set the target for the jmsserver (which eventually starts the JMSserver).
So, is there any way to add the destinations to the jmsserver after setting the targets??
thanks for any help
-Vijay
"Mihir Kulkarni" <[email protected]> wrote:
The following code works for me.
Btw, I use setDestinations and pass it an array of JMSDestinationMBeans
instead of using addDestinations()
Hope this helps...
mihir
import java.util.Set;
import java.util.Iterator;
import java.rmi.RemoteException;
import javax.naming.*;
import weblogic.jndi.Environment;
import weblogic.management.MBeanHome;
import javax.management.ObjectName;
import weblogic.management.WebLogicMBean;
import weblogic.management.MBeanCreationException;
import weblogic.management.configuration.ServerMBean;
import weblogic.management.runtime.ServerRuntimeMBean;
import weblogic.management.WebLogicObjectName;
import weblogic.management.configuration.*;
import javax.management.InvalidAttributeValueException;
/* Running this program will create a JMS Server and a JMS Connection
* Factory targetted to the Admin server. It will also add a JMS Topic
* and a JMS Queue to the JMSServer.
* This will create the following entries in the config.xml:
* <JMSServer Name="myJMSServer" Targets="MyServer">
* <JMSQueue JNDIName="jmx.jms.myJMSQueue" Name="myJMSQueue"/>
* <JMSTopic JNDIName="jmx.jms.myJMSTopic" Name="myJMSTopic"/>
* </JMSServer>
* <JMSConnectionFactory JNDIName="jmx.jms.myJMSConnectionFactory"
* Name="myJMSConnectionFactory" Targets="MyServer"/>
public class createJMS {
public createJMS() {
public static void main(String[] args) {
JMSServerMBean jmsServer = null;
JMSDestinationMBean jmsQueue = null;
JMSDestinationMBean jmsTopic = null;
JMSConnectionFactoryMBean jmsConnectionFactory = null;
JMSSessionPoolMBean jmsSessionPool = null;
JMSConnectionConsumerMBean jmsConnectionConsumer = null;
ServerMBean srvrMBean = null;
MBeanHome home = null;
JMSServerMBean jmsServerConfig = null;
file://domain variables
String url = "t3://localhost:7001";
String username = "system";
String password = "mihirk00";
file://variable Names
String DOMAIN = "mihirDomain";
String ADMINSERVERNAME = "MyServer";
String JMSSERVER = "myJMSServer";
String JMSCONNECTIONFACTORY = "myJMSConnectionFactory";
String JMSQUEUE = "myJMSQueue";
String JMSTOPIC = "myJMSTopic";
log("Creating AdminMBeans for JMS queue and JMS connection
factory");
try
Environment env = new Environment();
env.setProviderUrl(url);
env.setSecurityPrincipal(username);
env.setSecurityCredentials(password);
Context ctx = env.getInitialContext();
home = (MBeanHome)ctx.lookup("weblogic.management.adminhome");
log("Got AdminHome: " + home);
String name = DOMAIN + ":,Name=" + ADMINSERVERNAME + ",Type=Server"
WebLogicObjectName objName = new WebLogicObjectName(name);
srvrMBean = (ServerMBean)home.getMBean(objName);
file://srvrMBean =
(ServerMBean)home.getMBean(ADMINSERVERNAME,"Server",DOMAIN);
log("Got the serverMBean: " + srvrMBean);
} catch (Exception e) {
log("Exception in getting Admin home & srvrMBean: " + e);
/* the findOrCreateAdminMBean method of the MBeanHome is used to
create
* the Admin MBeans for all the JMS stuff needed for this utility
* the method takes 3 parameters - Name, Type, Domain
* the type Parameter is the name of the MBean you want to create
* minus the MBean prefix
* eg) JMSServer, JMSConnectionFactory, JMSQueue etc..
* It also takes an addition parameter which is the parent
AdminMbean
* if one needs to create a child node in the xml tree.
* Once the MBean is created you can set attributes on it using
the
* exposed API of that MBean
* Its always better to use the findOrCreateAdminMBean method compared
* to createAdminMBean method .
file://use findOrCreateAdminMBean to create JMSConnectionFactory
try {
jmsConnectionFactory =
(JMSConnectionFactoryMBean)home.findOrCreateAdminMBean(JMSCONNECTIONFACTORY,
"JMSConnectionFactory", DOMAIN);
if( jmsConnectionFactory.getJNDIName() == null) {
jmsConnectionFactory.setJNDIName("jmx.jms.myJMSConnectionFactory");
log("Created a JMSConnectionFactory");
else
log("looked up JMS ConnectionFactory: " +
jmsConnectionFactory.getJNDIName());
} catch (MBeanCreationException e) {
log("MBeanCreationException: " + e);
catch(InvalidAttributeValueException e) {
log("InvalidAttributeValueException: " + e);
file://create the JMSServerMBean
try {
jmsServer = (JMSServerMBean)home.findOrCreateAdminMBean(JMSSERVER,
"JMSServer", DOMAIN);
log("Found or Created a JMSServer");
} catch (MBeanCreationException e) {
log("MBeanCreationException: " + e);
file://create the JMSQueueMBean - use methods of
JMSDestinationMBean
file://here we pass the jmsServer as the parent MBean so that the
file://JMSQueueMBean is created as the child of the JMSServerMBean
try {
jmsQueue =
(JMSDestinationMBean)home.findOrCreateAdminMBean(JMSQUEUE, "JMSQueue",
DOMAIN, jmsServer);
if( jmsQueue.getJNDIName() == null) {
jmsQueue.setJNDIName("jmx.jms.myJMSQueue");
log("Created a JMSQueue");
else {
log("looked up JMS Queue: " + jmsQueue.getJNDIName());
} catch (MBeanCreationException e) {
log("MBeanCreationException: " + e);
catch(InvalidAttributeValueException e) {
log("InvalidAttributeValueException: " + e);
file://create the JMSTopicMBean - use methods of
JMSDestinationMBean
file://here we pass the jmsServer as the parent MBean so that the
file://JMSTopicMBean is created as the child of the JMSServerMBean
try {
jmsTopic =
(JMSDestinationMBean)home.findOrCreateAdminMBean(JMSTOPIC, "JMSTopic",
DOMAIN, jmsServer);
if( jmsTopic.getJNDIName() == null) {
jmsTopic.setJNDIName("jmx.jms.myJMSTopic");
log("Created a JMSTopic");
else {
log("looked up JMS Topic: " + jmsTopic.getJNDIName());
} catch (MBeanCreationException e) {
log("MBeanCreationException: " + e);
catch(InvalidAttributeValueException e) {
log("InvalidAttributeValueException: " + e);
file://create the target Arrays
JMSDestinationMBean[] jdm = {jmsQueue,jmsTopic};
TargetMBean[] tm = {srvrMBean};
file://set the Destinations for the jms Server
try {
jmsServer.setDestinations(jdm);
log("Added Destination to the jmsServer");
} catch(Exception e) {
log("Excpn in setting the property for jmsServer:" + e);
/* Now target the JMS Server to the appropriate Server
* As the JMSServerMBean extends the DeploymentMBean, we can
directly
* use the addTarget method of the DeploymentMBean
file://ordering is important
file://Target the JMS ConnectionFactory
try {
jmsConnectionFactory.setTargets(tm);
log("Targetted the Connection Factory to the admin Server");
} catch (Exception e) {
System.out.println("Exception in targetting the
jmsConnectionFactory to the Admin server: " + e);
file://Target the JMS Server
try {
jmsServer.setTargets(tm);
log("Targetted the JMS Server to the admin Server");
} catch (Exception e) {
System.out.println("\nException in targetting the jmsServer to
the Admin server: " + e);
log("Done with registering AdminMBeans for JMS");
private static void log(String s) {
System.out.println("\n[createJMS]: " + s);
"Vijay Bujula" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I am trying to create 2(or more) JMS Destinations (Topics and Queues)in a
JMS Server.
The code looks like:
MBeanHome home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
ServerMBean srvrMBean = (ServerMBean) home.getMBean("examplesServer","Server",
"examples");
JMSServerMBean jmsServer =(JMSServerMBean)home.findOrCreateAdminMBean("examplesServer",
"JMSServer", "examples");
jmsServer.setStore(jmsStore);//jmsStore is JMSJDBCStoreMBean obj
jmsServer.setTargets(srvrMBean);
JMSDestinationMBean jmsTopic1 =(JMSTopicMBean)home.findOrCreateAdminMBean("tempTopic1",
"JMSTopic", "examples", jmsServer);
jmsTopic1.setJNDIName("com.temp.topic1");
jmsServer.addDestination(jmsTopic1);
and the second one is added as:
JMSDestinationMBean jmsTopic2 =(JMSTopicMBean)home.findOrCreateAdminMBean("tempTopic2",
"JMSTopic", "examples", jmsServer);
jmsTopic2.setJNDIName("com.temp.topic2");
jmsServer.addDestination(jmsTopic2);
(Actually, the Topics are added to the jmsServer in a method)
I can see in the console that the first topic is added to the JMS serverand to the
JNDItree of the server instance,
But for some reason, the second topic is not added to the JNDI tree(butit
is added
to the JMS Server).
and I can not look up the second object in JNDI.
Does anybody come across this problem??
what is the right way to add the destinations??
thanks for any help
-Vijay

Suggestion on more then one people when using internet...

hi, first off all, sorry for my bad english... so, my suggestion... on my notebook, I and my wife are using internet... my wife uses firefox, and I must use other browser, because of we use same websites, such as facebook or gmail. we save passwords and users. and if we use one browser, we must change user, write passwords... my seggestion... can be created user profiles... egzample... i turn on firefox, and on main screen view a list of firefox user, such as my and my wife... i turn my acount, i just click facebook and i get where... later my wife turn on firefox and she see this list of user, she get her's user, and gets to facebook without my facebook turn off and write her's name and password... it like be as too firefox instaed on notebook... these acount have their own tabs, start pages... and if to next computer one person uses firefox, just on install, he turn off this feature...

Create a new profile for the other users and create a desktop shortcut with -P "profile" appended to the target to launch each profile.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Hi, more then one app in my iPad are shuting down wen I am using it... Do you now way?

Hi, more then one app in my iPad are shuting down wen I am using it... Do you now way?

This Apple article might help, if it's only happening with specific apps -> iOS: Troubleshooting applications purchased from the App Store
You can always try restarting or restoring the iPad.

Can I use more then one apple ID on my computer/osx app store

Hi,
I use my MBP/iMac/ipad/iphone for both business and home. Right now everything is setup to my home apple id (and I have made quite a few purchases with that). With the release of the osx app store and FCPX, my company wants to buy these for my computers. But they want to do this on their apple id. Can I run more then one id on a mac? How can I make this work as I know they will want me to start getting more apps as they are released.

You can have apps from multiple Apple IDs on one Mac. The issue will be that to update Mac apps bought with A ID #1 will require signing into A ID #1 in the MAS. And later when apps bought with A ID #2 need an update you will need to sign into A ID #2 in the MAS to update them. If you can keep that straight and can abide that requirement, there should be no issues.
The same will be true to update iOS apps, but using iTunes.

Is there a way to pair more then one set wireless head phones to either a iphone or ipad with the blue tooth?

Is there a way to pair more then one set wireless head phones to either a iphone or ipad with the blue tooth?

Yes. I have two different Bluetooth headsets and they are both paired to my iPhone so I can use either one but only one can be used at any one time.
To pair the second one, simply repeat the pairing process that you used for the first one.

Using more then one table/view in same Report

Hi,
I am using Discoverer Plus Version 9.0.4.43.15.
Is it possible to use more then one table/view in a report without the tables/views being joined in any way? It would be like using two different datasets in the same report without the datasets having anything to do with one another. Right now when I select items from the available tab I can only pick tables that relate to one another in some way.
Or is it possible to use more the one table in the same report? Each table using a different query/view/table.
Thanks

Spence,
try following type of query using set operator UNION / UNION ALL:
select col1,col2
from t1
union all
select col1,col2
from t2
If you don't have restrictions then this is the best way.

HOW DO I USE MORE THEN ONE ITUNES WITH MY IPHONE WITHOUT ERASING MY MUSIC?

I have two different laptops with iTunes on it. I use both of them but my iPhone only works with one iTunes. I plug it into the computer and it says that my iPhone cannot use more then one iTunes. Is there a way I can use both or no?
YES I AM CLICKING MANUELLY ADD SONGS TO MY iPhone.
I just bought my iPhone about a week or so ago.
Please help ASAP.

I clone my library to a portable drive using SyncToy 2.1, a free tool from MS. I run this both at home & work so that I essentially have three identical copies of my library for backup redundacy, any of which I can use to update my iPods and my iPhone. I use iTunes Folder Watch occasionaly in case I've managed to download, for example, a podcast at one location but overwrite the library with a newer copy updated at the other. It can be done but you need to take considerable care...
tt2

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

How to use 'BAPI_GOODSMVT_CREATE' for more then one row selected ???

Hi,
I am using bapi , BAPI_GOODSMVT_CREATE , my requirement is that first perform ALV display with check boxes & then user can selsct any number of rows & then on clicking execute button this bapi is triggered , now my ques is that if i am selecting rows one by one & executing , then am able to post data successfully, but if am selecting more then one row at a time then its giving me error
" exactly one serial no must be selected (instead of more then two / three ) ."
plz help me .
this is how i am filling data in BAPi & bapi call
FORM FILL_BAPIDATA .
wa_GOODSMVT_HEADER-PSTNG_DATE = sy-datum.
wa_GOODSMVT_HEADER-doc_DATE = sy-datum.
wa_goodsmvt_code-gm_code = c_gmcode.
LOOP AT it_final INTO wa_final.
    wa_GOODSMVT_ITEM-MOVE_TYPE = c_movtype.                 " '313'.
    wa_GOODSMVT_ITEM-material = WA_final-MATNR.
    wa_GOODSMVT_ITEM-ENTRY_QNT = wa_final-verme.
    wa_GOODSMVT_ITEM-plant = WA_final-WERKS.               "'DB10'.
    wa_GOODSMVT_ITEM-STGE_LOC = WA_final-LGORT.
    wa_GOODSMVT_ITEM-BATCH = WA_final-CHARG.
wa_GOODSMVT_ITEM-BATCH = l_charg.
    append wa_GOODSMVT_ITEM to IT_GOODSMVT_ITEM.
    clear: wa_GOODSMVT_ITEM.
ENDLOOP.
LOOP AT it_final INTO wa_final.
    wa_serialnumber-SERIALNO = wa_final-sernr.
    APPEND wa_serialnumber to it_serialnumber.
    CLEAR wa_serialnumber.
ENDLOOP.
LOOP AT it_position2 INTO wa_position2.
    wa_serialnumber-MATDOC_ITM = wa_position2-wepos .
    MODIFY it_serialnumber INDEX sy-tabix from wa_serialnumber TRANSPORTING MATDOC_ITM .
ENDLOOP.,
data: begin of mthead.
        include structure bapi2017_gm_head_ret.
data: end of mthead.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      GOODSMVT_HEADER               = wa_GOODSMVT_HEADER
      GOODSMVT_CODE                 = wa_GOODSMVT_CODE
   IMPORTING
      GOODSMVT_HEADRET              = mthead
    MATERIALDOCUMENT              = w_MATERIALDOCUMENT
    MATDOCUMENTYEAR               = w_MATDOCUMENTYEAR
    TABLES
      GOODSMVT_ITEM                 = IT_GOODSMVT_ITEM
      GOODSMVT_SERIALNUMBER         = IT_SERIALNUMBER
      RETURN                        = IT_RETURN
GOODSMVT_SERV_PART_DATA       =
EXTENSIONIN                   =
APPEND w_MATERIALDOCUMENT to it_GOODSMVT1 .
IF sy-subrc = 0 .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*MESSAGE text-016 TYPE 'I'.
PERFORM msg_log .
ENDIF.

Hi,
Did u check the serial numbers table before calling the BAPI. Might be the case tht same serial number is assigned for all items, in this case the goods movement may be possible with same serial number for all items.
Reagrds,
Aditya
Edited by: aditya on Aug 11, 2009 11:46 AM

Same variable "used in more then one InfoObject"

I want to use the same user entered value as part of the definition of two different restricted key figures, restricting on two different characteristics. Basically the user will enter a date, and one key figure includes only those with a "Calendar date" < the entered date, the other will have "Date1" less then the entered date and "Date2" greater the entered date. When I try that, I get the error "Variable Select Date used in more then one infoObject". How can I either use the same variable for more then one characteristic, or create a new variable that takes the value of the "Select Date" variable without prompting the user to enter the same date multiple times.
thanks
Val

Hi Val,
Hereunder an example of a routine extracting year from month, month inserted manually (year = anno in Italian):
DATA: loc_var_range LIKE rrrangeexit.
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: v_anno(4) TYPE c.
CASE i_vnam.
WHEN 'VCE_ANNO'.
    IF i_step = 2.
      CLEAR l_s_range.
      LOOP AT i_t_var_range INTO loc_var_range
              WHERE vnam = '0PCALMON'.
        CLEAR v_anno.
        v_anno = loc_var_range-low(4).
        l_s_range-low      = v_anno.
      L_S_RANGE-HIGH     =
        l_s_range-sign     = 'I'.
        l_s_range-opt      = 'EQ'.
      ENDLOOP.
      APPEND l_s_range TO e_t_range.
    ENDIF.
endcase.
Ciao.
Riccardo.

More then one repositry could be used at same time?

please anybody can told what we can use more then one repository at same time? as i have two reposities as sh,paint.what these two could be enable in nsq file .
Edited by: shakeel khan on Jan 4, 2010 5:03 AM

yes you can..
check the following links
http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/
http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/
Regards,
Raghu

Fetching The more then One Company ID by using PLSQL Table on Block B1(FORM

I have two blocks in Form (Forms 10g) .On the Block B2 I have populated the Company Id by using the PLSQL Table.Now I selected more than two company ID from that Block ...I just want to keep the Company ID in the Temp Field on the Block B1.which I have selected on the Block B2.Any idea how can I assign more then one Company ID to That Temp Field on B1.

This doesn't appear to have any connection to JMS or indeed to Java. Wrong forum. Locking.

Using more then one Multitouch.inputMode on one screen

Hi All,
I have figure out that on one screen I am not able to work with more then one Multitouch.inputMode. As per my requirement I am having two different component on the same screen,one is using the TouchEvent and another is using GestureEvent.I am getting the issue that if I am using both on the same screen then the GestureEvent is not firing.
Any help will be appricated.
Thanks in Advance.
With Regards,
Shardul

Or you could use gestouch:
https://github.com/fljot/Gestouch
With that you can detect various gestures all in one gesture mode. It may solve your issue.

HT1495 More then one iPad being used.

Similar Messages

Maybe you are looking for