HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process

Similar Messages

Does airport express need to be connected to Internet to use purely for AirPlay ?

Does airport express need to be connected to Internet to use purely for AirPlay ? Or can I just attach to my stereo and have my Mac connect directly to it in the absence of a wireless network? Tks

HKCV wrote:
can I just attach to my stereo and have my Mac connect directly to it in the absence of a wireless network?
you will have to configure the express to create a wireless network but you do not need a connection to the internet.

I CANNOT PRINT FROM MY IPHONE 4 TO MY BROTHER 8890DW PRINTER WHICH IS CONNECTED TO MY TIME CAPSULE/NETWORK VIA ETHERNET CABLE???

Why can’t I print from my iPhone 4 to my brother 8890dw printer which is connected to my time capsule/network via ethernet cable??? My iPhone does not even locate my printer,even though I have no problem printing from my Mac to the same printer.

Typing in all caps indicates shouting, is considered rude and is difficult to read. Many simply do not read such posts.
You would need an airprint enabled printer or an app that proides printing function.
iOS: AirPrint 101

HT3728 every time my iMac sleeps or restarts it loses the connection to airport express and i must reset and connect with router via ethernet cable.

Every time my imac sleeps or restarts it loses the wireless connection with my airport express (used for streaming music). I then have to disconnect the airport express from my stereo, bring it to my router, connect it to my router with ethernet cable and reset the wireless connection. Even with my airport express in the same room as my router Airport Utility cannot find it until i plug in an ethernet cable, so i do not think this is an issue with my wireless network. Router is a newer netgear.

Hi there frustrated newbie 2014,
You may find the troubleshooting steps in the article below helpful.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

Connecting TC directly to my macbook via ethernet cable

Folks,
I've looked at a number of posts on this topic but I must be missing a step because it is not working. Simply want to do file transfer via ethernet.
so... I connect a ethernet cable from the TC to my Macbook - what do I do next?

dpm,
This works for me when I have to temporarily connect the TC to my Mac via ethernet.
*Create An “Ethernet Only” Location*
While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.
Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
Next, go to System Prefs --> Network.
At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
Now, change “Location” to “Edit Locations”.
Click the “+” button and create a new location named “Ethernet Only”.
Click “Done”.
In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
Verify that “Configure” says “Using DHCP”.
Click "Apply" in the lower right.
You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
Now begin your backup or transfer of files.
You should still have internet access during this period.
Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
Let us know if this resolves your issue.
Cheers!

Does airport express have to be connected to wireless modem by cable

I'm trying to set up my wireless network with my wireless modem in my hall and AirPort Extreme in lounge. I thought that the airport would use the wireless signal from the modem and operate as if it was connected by Ethernet cable. Wrong?

You need a minimum of two Apple routers if you want to "extend" a wireless nework using wireless only.
The AirPort cannot "extend" a wireless network from a 3rd party router using wireless only.
If you have a 3rd party router and an AirPort Exteme, the AirPort will need to be connected directly to your main router using a wired Ethernet cable connection.

Express to Broadband router via ethernet cable

I need to confirm something. I would like to purchase an Express 802.11n to set up a faster internet connection for my wife's MacBook, it can use the enabler. I have a fast FIOS internet connection (20/10). Can I connect the Express to my broadband router via an ethernet cable and will my wife see the speed difference? I have done a few speed checks and the 802.11g Airport network peaks out at about 7 mps. I expect to see her machine peak at about 15 mps if configured as a 802.11n only network. Is this about right? I would still have to suffer with the slower network, but us men do crazy things for love.
Mark

If your wife's MacBook is connected directly via Ethernet to the FiOS router does it show a connection faster than 7 Mbps? If not, changing the wireless interface isn't going to help anything.
If she does get the full 20 Mbps via Ethernet then switching to 802.11n might getter her a faster wireless data transfer.

Connecting time capsule to wireless modem router via ethernet cable

Hi
I use my TC to store all my data and itunes music/media. I've noticed that when purchasing music, the download speeds are quite slow, even though when I test the broadband speed, it's at a reletively ok 5 mbps. If I hard wire the tc to the modem router, will the downloads be faster? If so, how do I connect them up with ethernet cable. I've done so, and nothing seems to appearing on my desktop.
cheers
Mark.

Reset the TC to factory settings. This will allow you to reconfigure the TC to use Ethernet.

Problem for connecting my computer to my wireless router via ethernet cable

I have a wireles router model BEFW11S4. I have three computers connected to the router by wireless. All these connection work well. I have also a computer connected to the same router via an ethernet cable. This connection does not work, I cannot access internet with that computer. What can I do to correct the problem?

First off, you need to ascertain if the network card in the computer that is not working is capable of sending and receiving legitimate packets.
Best thing to do is try and connect this machine directly to your Internet Service Provider modem and see if it works.
If it doesn't, first you need to check if your computer is capable of acquiring an IP address automatically (See below for details).
If it is setup to acquire an IP address automatically, but still does not work you either need to find someone who knows how to test network hardware for you or you could try installing a different network card in your computer.
There are 2 ways a computer can receive an IP address. A typical way is for your router to provide one to the workstation using something called DHCP. The other method requires you to know the exact IP addressing required on your LAN such that your workstation when manually configured with an IP address knows where to send it's packets to get out to the Internet.
To check if the computer that does not work is configured to "automatically" receive an IP address from your router, do the following:
1. click on Start
2. click on Control Panel
3. double-click on Network Connections
4. right single-click on "Local Area Connection"
5. click on Properties
6. Scroll down the list until you see "Internet Protocol (TCPIP)"
and then double-click that item
7. Make sure "Obtain an IP address automatically" and "Obtain DNS server address automatically" are checked.
This setting allows the workstation to send a broadcast message looking for a DHCP server which can assign an IP address to the workstation. Your router typically would have a DHCP server configured for providing IP addresses. The typical home-based routers can be configured to run a DHCP server or not. Chances are that your wireless computers are automatically acquiring an IP address from your router and therefore it should work on Ethernet connections as well.
It is possible for something to be not working inside your router that would prevent the DHCP server from distributing IP addresses only on the Ethernet connections. If this is the case you would have to acquire a new router.
There is more that can be looked at, but this is where you need to start.

I am having difficulty connecting apple tv to our network via ethernet cable.

I am trying to connect to an apple tv on our office network. It seems to pick up the network configuration but doesnt connect when I turn on home sharing. We have a proxy server for connections to the internet so I dont know whether this is the show stopper or something else like incorrect setting of date and time. I thought I could set up and use the apple tv without a connection to the internet. Any advice would be appreciated. If an internet connection is absolutely necessary may be I could set up an Airport that talks to our proxy server.

COMPUTERS SETTINGS means AppleTV is not accessing the Internet network.
By "changing the lead" I assume you mean you've made certain you are using a proven / known working Ethernet cable and you've also attempted, unsucessfully, to connect via WiFi ?
If those things are true it sounds like you need to consult the school network administrator for onsite assistance.
I ran into this problem once but did not have time to work through it. I will duplicate portions of your problem today to see if I can better resolve your question

Help connecting 2TB Time Capsule to iMac via ethernet cable only

I have an iMac running OS X Version 10.9.3, and a 2 TB Time Capsule, which at our last residence I used both as my wireless router and Time Machine backup (via wi-fi). We recently moved and got Comcast, which provided us with a very, very fast router. As a result, I would like to start using the Time Capsule only as a Time Machine backup, preferably via an ethernet cable connection. I tried connecting the Time Capsule to the iMac via an ethernet cable with no joy. When I did, it seemed to bring back my old wireless network, which I don't want. Any help/advice would be greatly appreciated!

Is it something specific about the Comcast modem/router that makes it so I have to plug an ethernet cable into it too (as opposed to just running an ethernet cable directly from my iMac to the Time Capsule, which is what I assumed was possible and was hoping to do)?
Nothing specific about the Comcast modem/router, but definitely something specific about the Time Capsule in that it needs to connect to the Comcast modem/router over a wired connection to allow backups to occur over the Comcast wireless network. As we have said, the Time Capsule must connect to the Comcast modem/router using an Ethernet cable, as you see illustrated in the TC Setup Guide.
This solution doesn't really work, as our computer/TC is upstairs and the Comcast modem/router is downstairs.
Ethernet cabling can be run 300+ feet, or about 100 meters with virtually no signal loss, so you should be able to locate the Time Capsule anywhere that you want. My Time Capsule is located in a closet, about 60-70 feet away from the main router.
is there a way that I can use the TC as an upstairs wifi extender and still do my Time Machine back-ups wirelessly?
Yes. When the TC connects to the Comcast modem/router using an Ethernet connection, you could use the wireless capability of the TC to create a wireless network with the same wireless network name and password as the Comcast network. Then, you will have the same network upstairs and downstairs with much greater range.
You will be able to backup to the TC using wireless....or, if you prefer a much faster connection....connect an Ethernet cable from your Mac to one of the LAN <--> ports on the TC.
For example, let's say that you are making the first backup from your Mac to the TC when everything on the Mac is copied over to the TC. Typically, this might take 8-10 hours on average using wireless, but Ethernet would require only about 2-3 hours.
Once you have the first complete backup done, you could then perform subsequent backups over wireless, since these will only take a few minutes each time that the Mac backs up with only the changes that have occurred since the last backup.

How do I connect a printer to my TimeCapsule via ethernet cable?

My printer doesn't have a USB connection, nor does it have built in wireless. Just ethernet. How would I connect it? Just plugging it in doesn't seem to work.

I have the feeling TC is not prepared for such an action, those eth ports are for connecting other macs / PCs via eth cable, i.e. those not having wl. Printing is via USB, as long as I correctly remember the instructions. I have a similar Apple device, the Airport Extreme, which is identical to TC, just it has no disk inside.
It is not clear why you purchased such a printer before clarifying connection method.
Perhaps others may jump in for help.

Does the airport express need to be connected to router with ethernet cable to work?

We are trying to set up 2 zones for streaming music. The guys at Apple sold me an airport express. However I cannot get it to connect to the internet unless it's wired directly to my wifi router. This does not work for me as the components I need to plug into it are located in another room of the house. Am I doing something wrong or am I trying to get the AX do something it can't?

The Express cannot wireless extend non apple router.. however it can join a wireless network that is non-apple and it can work as a wireless to ethernet bridge. It should be able to connect the audio output to amp or speakers. But you need to do the setup, choosing join a wireless network which is under the options and not displayed as a standard connection type in the utility.
Here is one example of doing it.
https://discussions.apple.com/thread/5719954?tstart=0

HT1515 Does the airport express need to be connected to router if you are using USB for printer?

My thinking was I could connect airport express to printer by USB and it would work without connecting it using CAT5 to router. Am i wrong??

This should work fine if the Express is connecting to a wireless network provided by another Apple router. Is that the case here?

I have FIOS. I linked my FIOS router via ethernet cable to an Airport Extreme. I want to extend the range using an Airport Express wirelessly; however when I plug in the Express, the network does not find it.

Any help is appreciated.

Make sure the ethernet cord is plugged into the WAN port on the Aiport (the port with a circle of dots above it) and do a hard reset (hold the reset button until the light blinks rapidly.) It will not automatically appear in the Airport Utiltiy. You are looking for the airport under the wifi menu after a few minutes or in Settings>Wifi on an iOS device that you can click to join and continue to setup.

HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

Similar Messages

Maybe you are looking for