HT1515 My modem is flashing orange, what does this mean?
My modem is flashing orange, what does this mean?
Click the Finder icon on the dock at the lower left of your Mac's screen, then open Applications > Utilities > AirPort Utility
Click directly on the Time Capsule picture
If you see an Update button, click it
Otherwise, click on the small amber icon and a message will appear to tell you why the amber light is flashing
Similar Messages
-
Hi, I was given an iMac Flat Screen over the weekend, it turned on ok, this morning when i turned it on there is a circle with a flashing ?, what does this mean, help!
It means that it cannot locate the operating system.
You need to reinstall from the disks that came with the iMac and which the vendor is required to give you. -
Hi
I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it? What does this mean and how do I get it to stop so I can log onto my laptop?Deev
Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
Regards,
Joseph -
My time capsule is flashing yellow. what does that mean
my time capsule is flashing yellow. what does that mean?
It needs attention. Determine the reason by using AirPort Utility. It's in your Mac's Utilities folder.
-
Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?No, my file name is mainContent.oam
My project name is mainContent.an
This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
On a MacPro, 10.7.
Are you an Adobe person or just a nice helper? -
Backup Failed. Comment is "Make sure your computer and backup disc are on the sme network and the backup disc is turned on". What does this mean?
Just back from the dentist.
Did a hard reset and when i asked time capsule to do a backup it tells
me
"Time Machine could not complete the backup. The backup disk image is already in use"
I think I misunderstand how this back up device works.
Is it to be plugged into the back of the router with an ethernet cable?
I have the Time capsule sitting beside my Imac.
The cable modem and router are in another room
I am new at this stuff. Thank you for patience and help -
What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"
If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help? -
What does this mean?
My iphone 4s just developed a similar problem. Ultimately, after a visit to the Genius Bar at which I was offered a replacement phone for $149, I took the phone to a non-Apple repair shop which diagnosed the problem as tarnished pins in the docking connector and replaced the connector for $49.
The symptoms I experienced were that the phone would not pull a charge. I tried different cables, wall outlet versus computer USB connection, etc. The screen stayed black until I depressed the sleep button, at which time the red battery / lightening bolt symbol would flash three times and then the screen would go black.
If your battery is dead, that icon will not show up at all. If you get the icon, it means your battery is run down and needs to recharge, but the defective docking connector is preventing the battery from taking the charge. -
When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !
You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
Is this ADSL?
Do you have the modem in bridge?
How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported. -
i am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?
thank you thank you for taking an interest. this is so frustrating.
i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
will not boot from leopard disk.
tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
these are fresh drives with only what came on instll disk loaded.
thanks again for taking an interest.
i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
This is making me crazy. I anxiously await your words of wisdom. -
I tried to install Mac OS 9.1. I turned the computer on, heard the bong noise (although with some static), and inserted the OS 9.1 installation CD. It started to boot, but froze up. I rebooted the machine, and the same thing happened. One more reboot, and i get 3 beeps and the power button is blinking. What does this mean?
Hi, it indicates a RAM problem, (or Logic Board around the RAM).
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/ht1547 -
The apple icon appears every 15 seconds but the iPhone never boots. What does this mean?
The iphone 3GS was in an otter box--in a pocket--and went in a mudbath for a couple of minutes. Yes, really. None of the water sensors turned pink on the phone and now, two days later, the apple icon pulses on and off every 15 seconds when the phone is hooked into a USB cable to charge. What does this mean and what should I do?
It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton -
I unplugged the power adaptor and suddenly, my mac started beeping repeatedly like an alarm. My mac was fully charged and would not start up. I pressed down on the restart button to reboot it and the noise stopped.
What does this mean?Hi, it indicates a RAM problem, (or Logic Board around the RAM).
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/ht1547 -
When I first plug in my power cord it lights up green and then after a few seconds changes to red. What does this mean and how do I fix it?
Apple systems in MBP have self-maintaining charging systems. If the battery is less than 95%, the charger light turns orange when plugged it. It will charge to 100% and stay green then will hold on charging until the battery drops to 95% again.
-
My computer won't fully load without turning back off completely. I also tried plugging it in to the charger but it still did not work. What does this mean? What should i do?
It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton
Maybe you are looking for
-
How to move music from an apple id to a new appe id
How do I move my daughters music from my apple id as she is now old enough to have her own apple Id???? Thanks
-
Total beginner question about relative cell references
It seems like this ought to be easy, but I cannot get it right. I have 2 columns in a table. The first contains dollar amounts in each row. I would like the second column to sum the dollar amounts up to that row, and I'm trying to construct a formula
-
Why no Data Guard tools shown on EM Console?
I have successfully created a 10g(10.1.0) physical standby database a broker on OEL5.0 Linux system. Then I configured the fast_start failover and observer on the Data Guard system. But no any Data Guard tools(GUI tools) shown on EM Console. How can
-
After importing my Aperture 2 library to Aperture 3, I get repeated prompts to connect to a local computer (my wife's). Despite username and password being correct for the share, the response is that it could not connect. It has prompted me 50+ times
-
Can BIP be logged in using BIEE user from external tables?
I've setup the BIEE Session Initialization Blocks using data from external table in database. And now Oracle BI Interactive Dashboards can be logged in using user "sysadmin" which stored in external table. And user "sysadmin" has its group informatio