HT1529 MY DONGLE IS NOT DETECTING IN USB PORT

Sir,
1. My dongle is not detecting in USB port; what to do?
2. How I can go to My Computer (like Windows) so that I can see filing system memory status?
3. For extending warranty what is the process?
Regards,
Subrata Dey

Assuming yu have a PC try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty

Similar Messages

  • USB 2.0 Stick not detected on USB 3.0 port

    Hey, When I plug in an USB 2.0 Stick into the USB 3.0 port of my T550, it is not detected. USB 3.0 harddisk works. I am working with Windows 10 64 bit.BIOS is updarted to the newest version. Thanks!Nathan

    Hello.  This is Kimberly from the customer experience team at Lenovo. Sorry you are having an issue. The product manager for T Series suggested the following:   We assume that the USB 2.0 drive you are trying to connect functions in another computer.  It is probably a formatting issue or a USB Registry Key Conflict.   If reformatting the USB drive doesn't work, search for USB registry cleaner tools online to remove any conflicts/corrupted USB registry keys.  Also, Microsoft may have some support tools to clean the USB registry keys

  • Mac Pro not Detecting Bootable USB Drive to Install Snow Leopard 10.6

    Hi
    I have to Mac Pro 2 x 2.8 GHz Intel Xeon. I have been running Leopard on them. I wish to install snow leopard, so i took out my USB HDD where I have made a Bootable Partition with snow leopard. I have used this in the past on all my machines to install snow leopard. Now when I try to install Snow Leopard from this on my mac pro, it does not detect in the "Option Boot" start up menu, it only shows my leopard disk. If I got to start up disk in system preference, then it shows my Snow Leopard disk, but when i select that as start up, it still boots to my Leopard..
    Since I am doing a fresh Install , I have another HDD installed, formatted for snow leopard. When I launch snow leopard installer from Leopard and select install in the new drive, it does some installation , but when restarting  it goes to my leopard again.
    This is the case on both the Mac Pro;s, but not on my laptops, I tried on my air and my macbook pro, and my friends mac book pro, it instantly boots up to the usb drive with snow leopard.
    So is there anything im missing ? Or is there something wrong with my Mac Pro's?
    I dont have the snow leopard DVD, else I would have tried that too..
    Please advice asap!!
    Thanks
    Sa1

    Hey
    Thanks for the reply!
    I have two USB HDD, with the copy from snow leopard dvd, and both are formatted in GUID, they work fine on my laptops and even the old mac mini, just not working on two identical Mac Pros.. Its very strange, as it keeps booting to leopard, and if I remove leopard Disk, and just put the new one and connect the USB dive, its shows a folder with a "?" mark sign!
    And the USB just works fine after its booted to leopard, it even starts installing snow leopard to the disk i assign, but it does not complete the installation as it boots to main leopard drive..
    I have tried to reset PRAM on both machine, I have changed usb slot..
    I dont know what to do!

  • N9 not detected via USB connection

    Since last few months I have observed that my Nokia N9 is not detected via any PC if connected via USB cable. The USB cable is OK because my other devices are easily detected through same cable. Can anyone suggest solution. I have already try to "Clear device" under settings->Reset.
    Please help.

    @girishpadia
    Presumably your N9 still charges when connected to PC USB?
    Does this apply to both Nokia Suite and Mass Storage mode presupposing that Nokia Suite is installed upon PC?
    Happy to have helped forum with a Support Ratio = 42.5

  • Audigy NX / Win XP not detected as USB Device! Can't Inst

    My NX which is under a month old all of a sudden is not being detected by Windows XP anymore. I plugged it in today (it was working fine a few days ago) and it was giving washed out music when playing a CD - like everything was muffled and the bass was dominating. I unplugged it, replugged it in but Windows detected the USB device as "Audigy NX" and tried to reinstall the hardware, but failed, and that was the end of it - It did not appear under my device manager profiles, nor could I get it to work anymore with my laptop. I removed all the Audigy NX software, unplugged everything, went into safe mode and uninstalled the drivers, reinstalled the drivers... what it comes down to is that Windows won't even detect the hardware when I pull the cable out and plug it in again. What do I do when all the drivers & problem solutions are dependant on Windows seeing my USB device. (I even uninstalled the USB roots on my computer and redetected them.. it only found my USB mouse, but no the Audigy NX.) I haven't made any hardware or software changes since I last used it - I have been operating Windows XP Home edition, SP2 with no problems with the NX up until now. Perhaps its a Windows thing, but maybe you can offer some help.
    Thanks,
    Echostorm

    Echostorm
    Try doing a Cleansweep for the sound card. This information can be found at the Knowledgebase.
    http://us.creative.com/support/kb/ar...asp?l=2&sid=72
    Jason

  • Built in Isight not detected in USB

    Hi,
    I got the new IMac now and was using the isight. Had funw ith it and suddenly after I updated my system, Isight refused to work and the common error that everyone has" photobooth, cam used elsewhere" came in. So I checked the docs and found out that the cam is not detected in the USB list in the system profiler. Now how do you fix that??
    Any help is welcome.
    Thank you

    You are welcome, Ebenezer.
    However, while I understand that you are frustrated, I am not certain that I understand the attitude or intent of your posts here.
    And another thing...Kindly see that the right SMC should be 1.1f5 but mine is 1.6f0... we dont have support from Apple...
    Perhaps you mistakenly believe that I work for Apple. I do not.
    Apple makes these Discussions pages available as a place where users can share information to help other users. Like most others who post here, I am not affiliated with Apple in any way except as a retail customer of theirs.
    As explained in the Discussions Terms of Use, Apple employees will be so identified.
    If you have comments or suggestions for Apple, you may send them directly by submitting Apple Product Feedback. For the problem you pose in this thread, I suggest that you use Mac OS X Feedback. Perhaps you believe it to be more relevant as iMac Feedback. Either will go directly to Apple.
    If, after you have tried reapplying it, you believe that there is a problem specifically with the iMac EFI Firmware Update 1.1, you can copy the relevant parts of your writing from this thread and paste it into appropriate Product Feedback to be certain that Apple will see your comments.
    Contacting Apple for Support and Service includes contact info for India.
    I will be pleased to try to help further in any way I can.
    Respectfully,
    Jim

  • Lumia 1020 not detected via USB on Windows 7 PCs

    Hello - I hope you can help.
    My new Lumia 1020 is not detected on any of 3 Windows 7 PCs I have access to. When plugged in the phone will begin to charge but the PC does not detect the phone at all  - it doesn't appear under device manager in any guise (no portable devices or unrecognised devices).
    OS 8.0.10517.150 
    Windows 7 64 and 32 bit
    I have follwed advice on similar threads and been through the nokiatechsupport.co.uk troubleshooter on the issue which took me through the following:
    Install Windows Phone app for Desktop
    I just get the 'connect your phone' screen despite restarts of both phone and PC. Also tried switching the phone off and then plugging in = same result.
    Factory Rest
    Same result - phone is not detected, nothing appears in device manager.
    I've also tried installing the Nokia software recovery tool but that doesn't see the phone either.
    Have tried different USB ports on all PCs.
    Any help much appreciated, otherwise next step is talking to my network support I guess?
    Thanks
    Iain
    Solved!
    Go to Solution.

    Use the USB cable that came with the phone.  Have you always done this?
    A device that is under lock screen may not be detected and drivers will not load.
    The desktop phone sync program provides nothing that will help the phone be detected.
    The phone has to be seen by the PC and identified. When this happens the drivers are downloaded from the internet for the phone. Having the drivers does no good if the phone is not identified by the PC.
    If you have access to other Win7 or 8 PC's try connecting to them. If you take it to anybody that is the first thing they will do. This helps determine if it is the phone or the PC.
    If you take somewhere use Nokia Care.
    One thing I saw today, user having the same problem. On the phone, start an app that connects to the internet, like a news app. Then connect the phone to the PC.
    There are phones that won't connect.
    You should see it in windows explorer. It should install in 'portable devices' in the device manager.

  • MAC pro 2013 model not detecting E122 USB Modem

    Hi,
    For some reason, the light of USB modem doesnt glow, and neither is it detected. But when the Mac is restarted, the USB Modem does lit, and shows signs of being detected. Tried downloading Mobile Partner, but since the Modem is not detected, nothing proceeds. It worked well on my Windows PC.

    Contact the vendors technical support unit.  Because it may work on a PC, it does not follow that it will work on a Mac.
    Ciao.

  • IMac is not detecting external USB hard drive

    I restored my iMac (mid 2011 - i5 quadcore - 1TB - 16gb Ram - Lion 10.7.3) and my Macbook Pro (2010 Core 2 - 8gb Ram - Lion 10.7.3) I have a 1TB Toshiba external portable USB 3.0 hard drive.
    The drive connects and recognizes quickly and works without any issues on the MBP, on the iMac on the other hand it will not detect in system profile or disk utility. Occasionally when plugged in the drive will spin up and stay powered on, other times on plug in, the indicator light will flash quickly and power off. The drive is fairly new, lightly used, and I repeat has NO issues with the MBP. The iMac will read flash drives and USB devices without issue except for this external hard drive. Also when I restart if the external drive is plugged it it will hang until I remove it. Drive is partitioned 86gb in MS Dos with Master Boot Record profile, and the remaining space is partition 2 formated as Mac journaled.
    I am up to date on all updates from apple, and at a complete loss as to what to do next.
    Thanks in advance for all your help

    What version of firmware are you running on the 802.11ac?
    There is a 7.7.1 update with USB fixes - http://support.apple.com/kb/DL1665
    After my update to 7.7.1, I still cannot see the Seagate 3TB HDD.
    The disk works on a 2nd Gen 802.11n Extreme.
    This is

  • Zen Micro 5gb not detected w/ USB ca

    i just got my new micro and have had no luck getting the usb cable to work.
    ) i installed all of the spyware-bloated software required to copy music over to the player and found that none of them can detect it. not even the removable disk mode works. (and yes my usb port works - i even tested 2 other computers to see if they would pick it up)
    2) after wasting hours of my time going through the forums and reading anything even remotely related to Zen Micro usb problems i finally decided to go into recovery mode and "Reload Firmware."
    3) after plugging the player back in to see if it will be recognized by windows and then reload the firmware, it continues to go undetected. (i ran the "Creative Zen Micro Firmware update" with the micro connected through USB and it does not detect it.)
    *) concerning the quote about the removable dri've feature
    "If you are using a shared computer in school or at the office, and installing Zen Media Explorer is not possible, you can still transfer data files. However, you must enable Zen Micro?s Removable Disk mode when you do this."
    since you do not even need any extra software to use the removable disk feature, besides an OS like WinXP, i'm assuming that either the player or the usb cable it came with is busted. in either case i'm planning to get it exchanged for a set that works.
    am i the only one who's run into this problem? any feedback/suggestions would be greatly appreciated.Message Edited by assman on 09-2-2005 0:50 PM

    assman wrote:Thanks for the information! Quick to the draw and very helpful I'm surprised you're not part of the official customer support team
    It would be nice, but they don't have any facility for remote working (I'd have to work from Brazil, my current location). Aside from issues of them actually having vacancies etc. Maybe if everyone sends an email to Sim Wong Hoo.... I'd very much like a job, as getting one here in Brazil is proving impossible for a Gringo like me
    Anyway, I hope you get your player replaced ASAP and can get on with the business of listening to music!

  • New Airport Extreme -802.11 ac model is not detecting my USB Hard drive

    My new Airport Extreme -802.11ac model is not detecing my External USB HDD when connected via the USB port in the Airport Extreme.
    I'm using a Seagate USB HDD 3TB, and it's working when i connect my previous generation Airport Extreme router.
    Looks like the new version is not detecting my HDD.
    Please help.
    Cheers
    SK

    What version of firmware are you running on the 802.11ac?
    There is a 7.7.1 update with USB fixes - http://support.apple.com/kb/DL1665
    After my update to 7.7.1, I still cannot see the Seagate 3TB HDD.
    The disk works on a 2nd Gen 802.11n Extreme.
    This is

  • USB has power, but not detecting any USB drive. Also crazy trackpad.

    I own a 2012 Macbook Pro, and I am running OS X Version 10.9.4 on it. Everything was working fine until last week, when the USB ports stopped working. Now, the USB ports still have power because the lights in my USB drive and external hard disk turn on when I insert them into the system. However, the OS X is not able to detect any of these devices as well as my USB mouse. I have Windows 7 installed on bootcamp, but there is no USB response in Windows 7 as well.
    I have done the SMC and PRAM reset, as suggested on numerous other discussions, but there were no improvements.
    To add to all this, the trackpad on my macbook started going berserk. The pointer has started to randomly click and drag, while I am not even touching the trackpad. It is extremely hard to move cursor to a particular folder, because the cursor will click and drag a lot of times, while it has reached its destination. Also, the trackpad acts insensitive in certain regions. I tried cleaning the trackpad (as suggested on other discussions), but the problem goes away only temporarily. It seems, after using it for a couple of hours, the problem is back again.
    With USB and trackpad not responding, it is getting hard to pass the first week of school. I took it to IT department at my school, they checked it for a couple of minutes, and told me that I'll have to shell out $280 for sending it to Apple Depot. I'll really appreciate any kinda help!
    Thanks for your time!

    Hi @Ak7 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with your USB ports not recognizing most devices. I am happy to assist with this.
    Since it just recently started to happen, I would normally recommend starting with a system restore to a point before the problem began. (say about a week ago or longer if possible) Unfortunately you have already done a reinstall, so there should not be any useful restore points to use.
    Presumably you already backed up any data you could before reinstalling windows, and if so, then you could try a system recovery, which would restore the factory image of the notebook. Give it a try and let me know if it makes any difference.
    Using Microsoft System Restore (Windows 7)
    Performing an HP System Recovery (Windows 7)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Aluminum Keyboard Sometimes Not Recognized By USB Port

    I have an Aluminum wired keyboard that occasionally isn't detected by my Macbook in both Windows XP (Boot Camp) and Leopard. This is an exchanged one because the first one also behaved this way. I'm not using the extension cable. I have a USB wireless mouse plugged into one of the keyboard's USB ports and a flash drive. When the keyboard isn't detected, the mouse doesn't work (no lights on the receiver, can't connect), but the flash drive gets recognized. I've also had the keyboard not be detected without the flash drive so I know that it isn't the issue.
    When it isn't detected I have to disconnect and reconnect the keyboard multiple times until it randomly starts working. Once it works, it doesn't stop working, though after going to sleep it occasionally disconnects itself on startup. All the function keys work properly and there's no updates available...is there anything I can do about this?

    I've seen the very same problem. In my case I have a wired Mighty Mouse attached to one of the USB ports on the aluminum keyboard. Every time I plug it in -- not recognized first time. Second time -- success. Highly annoying.
    Unfortunately I don't have a solution for the problem.

  • N585 - Win 8 Autoplay does not respond - one USB Port

    I have a new (one month) N585 Ideapad, Canon Powershot camera plugged into 3 USB ports launches Windows Autoplay, the fourth (2.0 on the right, front that is NOT present on the G585) no Autoplay. I haven't installed any 3rd party SW (machine came with McAffee). Some investigation shows:
    - camera appears as portable device in Device Manager (although no usual 'bong' when plugged in or removed)
    - no Yellow/exclamation points for the USB hubs so that's ok
    - can manually launch import w/ win8 Start/Pictures/Devices but no Autoplay popup appears
    - Logitech mouse and flash drive DO work in the port
    I've read everything from USB port power limit issues, to shell hardware detection, resetting Autoplay defaults, and editing the registry. Also, that Lenovos have a good number of USB port issues! Does anything jump out with the N/G series of IdeaPads???
    I find it curious that this particular port is NOT on the virtually identical G585 machine profile....
    Thanks in advance!

    It could be that the port where it does not function may not be producing sufficient power for the given HDD.  It has been shown that all USB ports do not output the same power.  You might test with a USB 'Y' connector or a powered hub.
    Ciao.

  • Ipod Touch not recognized by USB port on my new radio! PLEASE help?!?!?

    Ok, so I just bought a new radio for my car so I can listen to my ipod touch 2nd gen (with the latest 3.0 software) through my speakers. Ok, that's all great, but the problem is that when I connect my ipod touch through the USB port on my new radio, it reads "device error"...
    My radio is an Alpine CDE-102. It does have an AUX input, and I can easily get a cable to fix this problem... but I'm wondering why my ipod touch doesn't show up through the USB?!?! And I don't know how AUX input sounds compared to USB input (probably less quality than the USB...)
    So, can you help me? I've also connected my ipod touch to my xbox 360 and it shows up as a camera - can't play music... all part of the same problem I guess...
    This is a SERIOUSLY annoying problem especially since I just dropped some cash on the new radio which might not even WORK!!! AHHHHH! A problem with the USB cable? Problem with the Ipod? Problem with the stereo? I'm not quite sure what to think...

    That is the ONLY cable that will work with that radio:
    http://www.alpine-usa.com/US-en/products/product.php?model=CDE-102&view=Specs
    From reading the manual for your iPod I'm pretty certain the connector is on the rear of your unit.
    You can connect an Auxiliary cable to the headphone out on your Touch to the AUX in on the radio but you will have to control everything with the iPod and it will not charge.
    The cable is $30, why don't you ask how much they would charge you to install it?

Maybe you are looking for