HT1533 SSD PROBLEM: unable to reinstall osx and also failed in backup recovery.

Yesterday my MacBook Pro 2011 suddenly got hanged and freeze. And I have to restart system by hard shutdown. Then I faced this problem every time. I reset nvram but it did not work . Then I thought May be it's corrupt operating system I tried to reinstall new osx maverick from recovery mode but system freeze again during osx downloading process. I tried this 2 more times but the same problem occurred. Afterwards I deleted all ssd drive data in partitions but when I tried to  unmount and delete the partitions here I was failed in unmounting partitions. But I deleted all data from all partitions.after this I tried again to reinstall osx but system hung after sometime. I also tried to recover from my time machine backup but the same problem happened and my system got freeze and I have to hard shutdown. I also did hardware diagnostic  test which showed everything ok. Now I am realizing that my SSD got corrupt.  Could you please help me what I  should consider that can fix my problem. I also tried fsck and verify and repair the disk.

Devbird,
are you still able to boot into Recovery mode? If so, select Utilities from the menu bar and run Terminal from there. In the Terminal window, give it the following commands, one per line, separating each command by pressing the Return key at the end of each line:
diskutil list
diskutil cs list
mount
Please include in your reply the full output from these commands.

Similar Messages

  • There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles and no errors reported.

    There are two iMacs connected through same router in my house but one refuses to login to facebook and other logged in sites. Local techies are bemused, I have just reinstalled OSX and still have the problem. Login page recycles, I get no further and no errors reported. Safari, Opera and Firefox. Deleted cookies and chain but still no action.

    If you have not already done so, read the router's user manual troubleshooting section and/or contact its customer service department/forums. 
    If still having problems, post back w/details of all you have tried to resolve the problems along w/the troubleshooting solutions that the "local techies" had you try.
     

  • I just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

    i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

    It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
    Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
    I'll assume that it was the recovery partition.
    Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
    If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
    If that doesn't work you have a few options:
    If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
    There is a small chance that Techtool Pro 7  will be able to repair your HD if Disk Utility can't.
    If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver.

  • Hi my itunes crashes everytime i try to excess the itunes store,it seems to work fine until that point,ive uninstalled and reinstalled itunes and also tried it with my fire wall off but all to no avail any help would be greatly appreciated

    hi my itunes crashes everytime i try to excess the itunes store,it seems to work fine until that point,ive uninstalled and reinstalled itunes and also tried it with my fire wall off but all to no avail. i  am using a new computer which isnt authorized yet if that makes any difference. any help would be greatly appreciated

    Windows 8 or Windows RT? iTunes won't run on Windows RT. It should run on Windows 8. Use the appropriate installer from an account with administrator privileges.
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    tt2

  • Why I it said "Your purchase could not be completed"and also fail to connect with the iTunes Store ?

    Why I it said "Your purchase could not be completed"and also fail to connect with the iTunes Store ?
    Thank you so much for that !

    Click here and ask the iTunes Store staff for assistance.
    (100884)

  • I Killed Quick time (going to reinstall OSX and need ac3codec for mac)

    Hi,
    I killed my quick time. I have a video file I want to play (a project I'm working on with others.) anyway, it has 5.1 audio. The video plays, but no audio. I put the file on the XP and still no audio. I played it on Divx player. It says I'm missing Tag 8192.
    So after a quick Google, i get ac3codec for the XP, install... and i get the audio on the XP with the video.
    Off to find the codec for the mac...I found a file, i forget where i got it, placed it in the /libary/qucktime. and none of my .avi files will play any more, just a white screen. my .mov files seem to work fine. I remove the codec, and QT is still busted.
    In reading the fourms here, it seems Quicktime is part of OSX, so there is no real, uninstall...reinstall thing, is that correct? Unless there is another suggestion, I plan on reinstalling OSX tonight. This should restore QT.
    Also, is there a ac3codec type thing for the mac?

    Ok, i'm getting really bent. I don't get how these played before and now they don't. I'm still not getting it to work.
    Here is the movie format: XVID, 608 x 272, Unknown
    I went here to get a codec: http://www.xvidmovies.com/mac/
    i down loaded the codec for OSX
    I end up with a file called: XVIDDelegate and i put in in the root of the HD\Libary\QuickTime.
    Still does not play.
    there is an instruction file.
    "First you need DivX 5 (http://www.divx.com/divx/mac/). Then, if you are
    on MacOS X, drop "XVIDDelegate.component" into /Library/QuickTime, or if
    you are on MacOS 9, drop "XVIDDelegatePPC" into your Extensions folder
    and restart."
    So i go to dvix.com, and it seems i have to pay $20. I'm really confused, maybe its just frustration blinding me. Most of my avi files played, now they don't.
    Thoughts?

  • How to reinstall osx and recover data?

    Hi
    If I reinstall osx 10.6.8 after hd format, and later connect my time machine external drive, will I get back all my stuff? I mean data, docs programs and so on?
    After having played with a linux install, I found partitions ex linux I don't know how to delete and reassign to the mac hd, so I think the easiest way shoul be a fresh reinstall.
    Thanks, Gianfranco

    Thanks, my osx is already at 10.6.8. I had a lot of fun with Ubuntu, and even if I was warned about issues, wanted to try. I did it because some hardware will not be detected by osx. Afterwards decided to uninstall Ubuntu and switch to W7 for the above. Disappoint: ex linux partitions will not be removed by disk utility, and, more frustrating, Bootcamp does not allow to install Win because it finds that mac hd is not journaled. Of course is not: to be it expects a contigous volume, not parted. So, just to talk about my experience, mac architecture is very rigid, both in hardware management and software: it wants to decide where to store or pick data according to itunes philosofy (not mine) and, at the moment don't find any advantage respect Win/Linux exept a beautiful piece of furniture. Sorry for my complaints, you were very kind and gave me a helpful hint, but I'm starting to regret the iMac/iPad purchase.
    Thanks for all, Gianfranco

  • Reinstall OSX and Password failure`

    OK... I ran into a prublem with the Mac, and I am trying
    to give her new life by reinstalling OSX after tech supports suggestion. I Held the C key and started from the DVD thus attempting to replace the OS... the computer is not recognizing my password. It appears as if the OS loaded BUT I can only log in as a Test User. It is not recognizing my Password.
    If the computer is not recognizing my password, after the OS install what can I do??? Should I try to erase the entire HD and reinstall again???
    Help!!!

    Yes if the only thing you can get is a test user account and cannot log into the admin account.
    Reboot with the DVD and hold down the "C" key.
    Do an erase & install.

  • Reinstalled OSX and Appleworks went bye bye?

    What gives? I decided to do a fresh install of my ibook and everything is there EXCEPT my Appleworks program that was there the day I bought it. A little help ont his would be great thanks.

    I just reinstall my OSX also and I have my software Install/restore that came with my iMac.
    After going through all the first layers of screens, I choose my hard drive and it says software restore in installing (or something like that I forget).
    Then another screen comes on saying to "insert the CD that looks like this" except what its showing is a picture is of the CD that's already running.
    There is only a quit button, nothing else.
    How am I supposed to install the software if I can't get beyond this screen?
    I just had to reinstall OSX 10.4, I'm using the software install disk that came with my iMac - which came with 10.2 installed.

  • Message: "The application was unable to start correctly (0xc0000022). Click OK to close." I've tried un/reinstall. IE also fails, Chrome ok.

    One or two users have reported this problem before but no-one has found a clear solution. Two days ago all was fine. Now Firefox won't open, error message as above. Oddly it shows as running in the task manager! At the same time I found Internet Explorer is also failing to open. But Chrome is working normally!
    I have tried restore points, I have tried uninstalling and reinstalling. Deleting all files in folder. Of course I cannot get to profile as cannot open firefox! I did not recently add any new extensions/add-ons.
    I am using Chrome now but really would like not to abandon Firefox after all these years.

    Hi iantwebb, sorry to repeat myself, but:
    There seem to be a very diverse range of problems that can cause that error, as shown in this Google search:
    https://www.google.com/search?q=application+unable+start+correctly+%280xc0000022%29
    Since IE won't start either, I suggest posting on Microsoft's support forum since they obviously are much more familiar with the clogs in the plumbing that cause this than we are here.

  • Time Machine no longer working after reinstalling OSX 10.5 w/TM backup

    About a week ago Disc Utility told me I had serious problems with my HD structure and a reinstall was necessary. Fortunately, restoring everything using Time Machine was flawless, however Time Machine has not done a single backup since. The Backup.backupdb file is still there on the external drive, along with 6 other folders created at the time I did the reinstall (same names as the 6 inside the subfolder, system, library, users...). If I try to manually do a TM backup it tells me I don't have enough HD space as though it wants to start from scratch, when the folders are all still there from before the reinstall.
    Any ideas why Time Machine no longer recognizes the files it created 2 weeks ago?

    I had to reinstall Leopard and restore using TM. It also worked flawless for me. When I checked to see if it was backing up again, there was nothing. I also tried to manually back and that didn't work either. I went into System Preferences, Time Machine and had to choose my TM backup drive again. Once I did that it worked perfect.

  • Attempting to upgrade Yogo Pro 2 SSD to larger one by cloning (and obviously failing)

    The laptop: Yoga Pro 2
    OS: Windows 8.1
    Situation: The laptop comes with a Samsung 128gb ssd (mSATA).  I used this space up, and need to upgrade to a larger SSD.
    Solution: I bought a Crucial M550 256gb ssd from MicroCenter for $159, and a Kingwin KM-U3MSATA USB 3.0 Mini SATA SSD Enclosure Adapter.  I downloaded a few free cloning programs, EaseUS, Acronis and Macrium Reflect.  
    Problem:  OK, so i have cloned a few HDD's in my day.  Never once had a problem transferring full cloning to a new larger drive.  But this time I am having all kinds of problems. 
    Process- 
    1) I stick 256GB card in Kingwin Enclosure. 
    2) I plug enclosure into USB 3.0 slot on Yoga.
    3) I select Disk Management
    4) Disk management says it needs to initialize disk before using.  Asks me to choose either MBR or GBT.  I choose what is preslected- GBT.
    5) Disk appears now in Disk Management as Unallocated.
    6) Open up EaseUS, and select the cloning option.
    7) Choose all the partitions in the first section, and my new 256gb drive as the option to clone them too.  I leave uncheced "optimize for ssd" and something else about sector stuff.  
    8) All seems to be going well.  Sectors start writing.  
    9) Then for some flipping reason it stops writing, maybe halfway through.  I get an error code.  
    10) I send the error code back to EaseUS.  Its rejected as undeliverable.  
    11) I delete the partition, which now is coming up as a RAW format.
    12) I try to repeat the process, sometimes with little to no success. 
    I did return the SSD back to microcenter to swap for a new one.  That didn't seem to help matters. 
    So can anyone offer any help for a desperate Yoga fan?  It's not supposed to be this hard, is it?  What am I missing?  
    Solved!
    Go to Solution.

    OK so if anyone wants to know, maybe you are experiencing the same problem, I have found a soltion for this, that worked for me anyways. 
    I was attempting to do a full disc clone, outlined the the procedures above. 
    I tried SEVERAL different cloning programs, and all came up with the same problem- It would stop working midway through a clone.  
    I thought it was maybe a setting on my laptop- Maybe the USB port, SSD etc is set to turn off at a certain time. 
    Nope.  I changed all these settings, and it was for nothing. 
    So as a last resort I chose to image my SDD instead of cloning it. 
    It required I send the file to my Desktop computer (it had enough memory available, so I found my Desktop on the Network and sent the image to a public folder. 
    Then I used my Kingwin USB SSD adapter, plugged it into Desktop, and wrote the Image file to it using EaseUS software. 
    Plugged the larger SSD into my Yoga, and it went through all four original bottable media options in DOS, denying me every time, but after proceding it allowed me to choose the Crucial 256GB SSD afterwards.  Booted right up. 
    I did have to use AOMEI Partition to merge the unallocated space with the imaged Partitions, but afterwards I am all set. 
    Still no idea why I couldn't just do a simple system clone.  

  • A few days i can't open my e-mails or edit , delete or sendfrom hotmail that problem happens only with FF and also i have already update it to version 11. Any idea how to fix that issue with hotmail problem?

    am having that problem with the version 10 and still continues with the new one version 11

    Hotmail works fine both on FF 10 and 11. Probably an add-on or plugin recently installed is responsible for your problem. Please check if the issue occurs using Firefox on a new, empty profile: (Don't install any addons into it) http://support.mozilla.org/en-US/kb/Managing-profiles#w_starting-the-profile-manager

  • Title: Error: Access is denied, unable to remove printer and also unable to install programs

    Hi Tony,
    Please assist me with the following information releted to this issue:
    1. Is your computer and printer connected on a network or domain?
    2. Are you logged in as an administrator on the computer?
    3. Which are the programs which you are not able to install on your computer and also provide us the exact error whne you try to install the programs?
    I would suggest you to refer to the suggestion provided by Waseemulla Shariff replied on March 17, 2012 in the following link:
    Once you successfully delete the printer, you may try to install the printer drivers from your printer manufacturer website and check the functionality. Refer to the following link:
    If you are not able to install any program on your computer, I would suggest you to refer the suggestions provided by Sandeep Dsouza replied on June 13, 2012 in the following link:
    Hi Yaqub
    Domain
    Yes administrator
    If I try to remove the printer icon I get a warning access denied and then the printer is off line and cant be restored to default or used / I had to restored windows and now are able to print / fax / copy but still no scan
    I then followed to the letter un plugging the printer / removing all drivers which I don't think worked / re installing from the web site / only to be told down load unsuccessful with a red cross next to the driver downloads
    So nothing seems to work / I tried the suggestions for Waseemulla / Sandeep still nothing
    Regards Tony  
    Canon MX340

    Hi,
    Regarding current situation, I suggest you use the Process Monitor to capture the trace when repro this issue.
    Then follow this article to solve the access denied issue:
    Process Monitor v3.05
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    Solving Access Denied Errors Using Process Monitor
    http://improve.dk/solving-access-denied-errors-using-process-monitor/
    How to use Process monitor, please refer to this article:
    Using Process Monitor to capture system events
    http://www.sophos.com/en-us/support/knowledgebase/119038.aspx
    Hope this could be helpful.
    Kate Li
    TechNet Community Support

  • After installing Firefox 4 Beta 9, using Manual Proxy Configuration fails to connect to the internet and also fails with corporate intranet. Has anything changed?

    Initially, Firefox 4 Beta 8 is installed. Manual Proxy Configuration was used, and worked fine.
    After installing Beta 9 using the built-in updater, connecting to internet and intranet fails instantly with Page Not Found error. Restarting Firefox does not fix the problem.
    Clean install of Beta 9 also exhibits the same problems.

    I have this problem too...
    about:extension >> http://pastebin.com/txJgvZsq

Maybe you are looking for