HT1535 The option for "On this IPad" does not appear?
Despite having a manual set up of content checked, the option for "On this IPad" does not appear? Why is this?
Hi pmbrady,
The "On this [device]" tab will only show up if you are in the non-sidebar view of iTunes. In short, if you have the sidebar on the left hand side, you will want to use the disclosure triangle (left of your device name) to view what is on the device.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Thanks,
Matt M.
Similar Messages
-
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
In ver 3.6 there was a prompt at shut down to save tabs. It seems that option is gone in ver 4. How can I fix this?
One of the changes in Firefox 4: '''''by default''''' Firefox 4 does not display the warning message when closing multiple tabs, but it can be turned back on by changing some preferences. ''<u>Note: This was a decision by the developers. On this forum, we are all '''uncompensated volunteers''' here to help other users. The developes/employees of Mozilla/Firefox rarely, if ever visit here.</u>''
#Type '''''about:config''''' in the URL/Location/Address bar and press the Enter key
#Accept the warning message (promise to be careful)
#The preferences page/list will open
#Filter = '''''browser.tabs.warnOnClose'''''
#If its value is set to false, double-click on it (in the lower panel) to toggle its value to true
#Repeat steps 4 and 5 for these following 3 preferences also:
#*'''''browser.warnOnQuit'''''
#*'''''browser.warnOnRestart'''''
#*'''''browser.showQuitWarning'''''
#**Note: last pref is new in Firefox 4b12, may need to add (boolean)
#**Info/Instruction for using '''''about:config''''': http://kb.mozillazine.org/About:config
#See:
#*https://support.mozilla.com/en-US/questions/785169
#*http://forums.mozillazine.org/viewtopic.php?f=23&t=2105039&p=10434467&sid=fd2a35945bb2c633687f7b50d8c53989
#*http://blog.zpao.com/post/3174360617/about-that-quit-dialog -
Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc. I have done searches and got the info details from the sim provider to activate, but instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ? When i put back my O2 sim card, the option reappears?
Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
Thanks everyone
RonnieHi Ronnie, was wondering what brand sim card you bought?
Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
What version of the iOS are you using?
Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you.
Telstra runs on a different frequency to others and offers the best coverage in Australia.
Just for the record I am not an employee of any mobile company. -
The SIM card in this iPhone does not appear to be supported" fix?
Hi ive just today got an unlocked iphone 4 from the Uk apple store.
Now i live in Cyprus so i got a microsim card from my carrier(cytamobile vodafone),
but when i try to activate the phone it gives me the above message.
Anyone have an idea?
Thanks.Hey Jayne =)
Wow didnt actually expect someone to reply.Well my little country doesnt have iphone 4 support as of yet tho a friend has got an iphone 4 and activated it with no problem with the same carrier. My sim is brand new too, just got it today.
Anws ill prolly go and ask them again.
Am also thinking that maybe its something to do with the itunes..oh well.
Thanks for your input.
Message was edited by: xarissolidus -
plz help . .
Then it isn't a factory unlocked iphone. Take it back to the store to have them look at it.
-
The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.
This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
I can't figure out how to downsize my photos for a website that won't take anything above 3MB my Photos are 4MB. Even when I send them in an email, they are too big to send more than 3 at a time and I don't know how to fix it! Help says that when I select a photo it gives me the option to downsize. It does NOT?????
This is the iPhoto for iOS forum. Are you asking about iPhoto on your Mac?
In iPhoto on your Mac select Export and you will have the option to select a size for your photo.
In iPhoto for iOS this capability is not there. I use PhotoForege2 on my iPad to resize my photos to meet the requirements you describe. -
THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....
Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.
-
TS1538 My the new ipad does not appear in itunes, Pls help
My ipad does not appear in Itunes to restore or back up data. Thestatus of my device are:
- updated the latest Itunes version 10.6 .
- tried to restart Apple Mobile Device in Window but it still doesn't work.
- Could not restore in DFU becasue the window doesn't recognize ipad. It appeared cable & itunes disk images but it itunes does not recognize.
- When i pluged the ipad in my laptop, window could not reconize ipad neither.
Please help to solve it!Let me summary what i have done in the last few days to try to fix the issue taht the new ipad does not appear on itunes 10.6 so that you guys can have an overview to help me :
- removed previous itunes together with Apple Mobile Device and Bonjours
- Reinstall latest version Itunes
- restart computer (for sure the problem not from laptop becasue my other new ipad and iphone4 stil work well with itunes)
- tried using recovery mode when the iPad is connected with computer and iTunes open; Keep the Powerbutton and the Homebutton pressed at the same time until see the Apple logo on iPad screen.Then wait for about 10 minutes (i repeat this step many times). Ipad is turned on but still not connect to itunes or no notice board appeared on itunes to start restore
- I changed the usb cable/port...nothing change
status of device is:
- battery is fully charged
- My laptop (window 7)
- All what i can get is the ipad is charged when i plug in laptop.
- no apple device is recognized on "my computer" window
- no images tab is pop up as usual to copy photo
Apple experts ...help me...pls... -
The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?
Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/ -
I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.
-
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up.
Maybe you are looking for
-
No accounting document generated after creating billing document.
I created my billing document in SD and saved but I am getting the message "No accounting document generated" What am I missing and what do I need to do? Is there a T code or menu path to see all billing document blocked from posting? Thanks for your
-
Hi all I'm currently building a website using Dreamweaver 8. You can see it at www.idl.dundee.ac.uk/~lyndon/active.htm as you can see i have a timeline running across the page and layers that pop up when the mouse is moved over them to give details(u
-
.swf works differently on different servers
I made a flash navigation 2 years ago that works fine (http://fwp.mt.gov/education/ecosystem/home.html - it's the bar with Discover, Explore, Conserve, Learn and Resources, with images on the right of a compass, bear, antelope, toad, and sage grouse)
-
X3500 Port Forwarding Stops Randomly, must Reboot
Hi, Hoping someone else has come across this and found a resolution... I have a very new X3500 router setup within a small business. I have approx 15 port forwarding rules configured - most of which are standard ones such as 80, 443, 25, etc. For w
-
-z defs on a dll sharable reports too many unresolveds
I'm developing a dso on solaris. I know I have a few undefined symbols -- i'm just getting my link line in order. So, to see all unresolved symbols in my dso, I link the dso with -z defs. The trouble is, it is now complaining about all the "implicit