HT1539 i have the digital copy disc but i lost the code number where i can find it
how i can get the code
You will have to contact the movie studio and ask them if they can issue you a new code.
Regards.
Similar Messages
-
the digital copy disc uses a power pc application that is no longer supported by mac os x, what can I do to obtain my digital copy?
If the OP is asking a generic question about how to run a CD-ROM, DVD or other disc that had an executable program that was a PowerPC application, he would either have to:
1. Install Snow Leopard (with Rosetta) into a partition on his hard drive or an an external hard drive, for "dual-booting" if his Mac will still boot into SL; or
2. Install Snow Leopard (with Rosetta) into Parallels to run his disc in Mt. Lion:
[click on image to enlarge]
<Edited By Host> -
I purchased Thor on Blu-ray + digital copy. I tried transferring the movie to my MacPro tower, but the digital copy disk will not load. I'm able to insert it and I can hear the drive trying to read it, but after about a min., it is ejected. I also tried on two separate MacBook Pros. All three machines are running 10.6.8.
Chris, if you read the full question, you'll see that I am referring to the "digital copy disc" which is a standard DVD.
-
I lost my seriel number for PS Elements 11 following computer crash. Os is W7
Peter Jones Aug 27, 2014 5:36 AM
Hi,
I lost my serial number for PS Elements 11 following computer crash. Os is W7. I have the cd installation disc but there is no serial number with it or in the envelope
How can I obtain the serial number please?
ThanksIf you registered the software you should be able to find the serial number thru your Adobe account online.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
I'm using the i/o board 6501. I would like to know if the board drivers support borland C++ 6.0 if so, where I can find the good library
This thread deals with programming DAQmx with Borland C++ 6.0.
Regards,
Micaela N
National Instruments -
Since I upgraded to the latest version of itunes I can't burn discs, I just get the message 'cancelling burn' with error code '4280', it was working fine before I upgraded, I am using Windows XP, any ideas?
Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install -
How do I reload all my contact, I lost it when I upgraded to 7.2, to no fault of apple, the bag is all mine.
Apps are forever tied to the Apple ID under which they were purchased. If your friend wants to be able to manage apps on their device using their own Apple ID, they will need to delete all the apps purchased using your Apple ID and buy their own.
Hopefully, you just updated your own Apple ID with the new email and didn't make the mistake of creating a new Apple ID. If you created a new ID, stop using it now, don't buy anything using it and go back and update the ID under which you purchased your apps. -
HT1539 Copied Skyfall from the digital copy - plays but no video, no audio
I'm running W7 and iTunes 11.0.1.12. iTunes says it downloaded the file at 2.3GB and it plays but I get a blank screen and no audio. All other movie files play just fine.
Hi Shippster,
Ok. in stages so that we can see where they might be adrift.
They should Add Buddies by using the + sign at the bottom of the Buddy List.
The choose Add Person
In the pop out Choose New Person
AND Then they need to choose the Account type first.
(It is possible to Add AIM name as @mac ones and vice versa. AIM servers where the Buddy list is held can not tell if it is a valid name or not. It will presume the Buddy is Off line if type and spelling are wrong)
Also in iChat > Preferences > Accounts
In here they should select their screen name on the left (Click once)
On the right they should select the Security tab.
This should be set to Allow All whilst testing (later when names are spelt right or the right type they can Allow Buddies only)
Some more info with pics http://www.ralphjohnsuk.dsl.pipex.com/page6.html
So, so far we have the fact they should check the View Menu to Show Video and Audio Status items to see other peoples camera a Audio icons.
They need to change their camera if they are the end with the Canon.
They need to check their Buddy list to make sure they added their Buddies as the right account type and spelt those Buddies Screen Names correctly.
Test account and real live testers
http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html
8:49 PM Tuesday; January 9, 2007 -
is there any way of helping me out please
There is no limit to the number of iPods you can sync to one computer, iTunes library, or account.
You might want to create a seperate iTunes library for him, perhaps on another user account on the system and move all of his Jazz music over to that new library. Once you have all of his music moved over to his own library, remove it from your own and then resync both of your iPods to clear his music off. This is just one way to do it.
If that was a bit confusing, take a look at this article for a few ways to manage multiple iPods with one computer.
How to use multiple iPods, iPads, or iPhones with one computer
B-rock -
This is self Explanitory...
PizzaTammer wrote:
It says it downloaded however I can see it in my movie library. How do I get the movie in my library?
What's the problem? You can already see it in your movie library. -
I am looking for a usb/station (I don't know what they officaly call it) to plug into the back of my computer so that I don't have to continually move my computer in order to plug in my devices. Don't know where to locate this device in order to buy, any help would be appreciated.
Google for a USB Hub, there are thousands.
-
I purchased the Bu Ray/Digital Copy of "Voyage of the Dawn Treader" today at Best Buy, but when attempt to install the digital copy, I get a message about 3 minutes into the download that says that the download has been interrupted, and to check available download in the store drop down menu in Itunes. Nothing there! The digital copy disc does not seem to play smoothly on my Imac, which may be the cause of the problem. What do I need to do to download the digital copy to my computer/Itunes?
Thank you,
Jonathan MinkI purchased the Bu Ray/Digital Copy of "Voyage of the Dawn Treader" today at Best Buy, but when attempt to install the digital copy, I get a message about 3 minutes into the download that says that the download has been interrupted, and to check available download in the store drop down menu in Itunes. Nothing there! The digital copy disc does not seem to play smoothly on my Imac, which may be the cause of the problem. What do I need to do to download the digital copy to my computer/Itunes?
Thank you,
Jonathan Mink -
Can any one help as the digital copy downloaded but was processing when iTunes froze and then I had to shut it down. I have the latest version and am using iTunes on a windows PC. I would imagine similar problems could arise on download processing if there was a power cut so surely iTunes knows that my ID has redeemed the movie and it will continue now?
Can anyone help?I forgot to add that when I looked at the store for available downloads it only continued to download the movie extras which is only 69MB of menu items and no movie content.
-
I bought the Toy Story 4 disc Blu Ray so it came with the DVD, Blu-Ray and digital copy. I downloaded the digital copy but it didn't come in full 1080 HD. Can I get the digital copy in Full 1080 HD?
You can't without the code.
-
I purchase the Avengers & the digital copy was successfully download to my Itunes library. But when I tried to drag the movie to my Iphone note showed ...
Itunes Sync - 1 item could not be sync. See Itunes for more information. HelpHello eLZhi,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides the most relevant information to your question:
iOS: 'Not enough free space' alert when trying to sync
http://support.apple.com/kb/TS1503
Thanks,
Matt M.
Maybe you are looking for
-
Photoshop CC (Version: 14.2.1) regularly crashes while working in 3D. My PC is Windows 8.1.
Photoshop CC 64bit regularly crashes while working in 3D. My PC is Windows 8.1. I am trying to create 3D text but while I am adjusting extrusion depths or editing the materials, the program crashes. I am able adjust my graphics card settings to giv
-
Webstart no longer works after update from Java 7 Update 67 to Java 7 Update 71/72
Hi, We have an application that is launched via Webstart. Last year, we had to make a bunch of changes to the application in order to work with Java 7 Update 45. It has been working fine up to and including Java 7 Update 67. However, it is no fail
-
i have an iphone 3gs. i recently uprgaded my computer which ment it went from windows vista to windows 7 ultimate.I want to add new music from my computer to my iphone but it says i have to restore it and loose my itunes content. If i do that will i
-
Backorder processing in Scheduling agreement
Hi, When user creating scheduling agreement with delivery dates,qtty will not be confirmed. as there is no stock. once company get the requirement, company starts production,after production-same will be informed to the stores department. Then they p
-
Message control and G/L posting
Hi! I am looking into the possibility of triggering an Idoc output of type ACC_GL_POSTING, as soon as someone makes a posting into the G/L, eg through fb50. When moving into NACE for configuring, an application Id must be chosen for in order to confi