HT1539 Why does it hours to complete "processing file" when completing a digital copy transfer to itunes?

I'm trying to transfer the digital copy for Skyfall on to my computer and it seems stunk on "processing file". I have had this same screen up for 3 hours now. How and when does this process finish?

That's simple, just go to iTunes->Preferences->Advanced->Uncheck Copy files to iTunes Media folder when adding to library.

Similar Messages

Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
-Snowconedxx39

Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
I'm curious what the exact problem will be.

HT2506 Why does Preview also open previously viewed files when I double click on a file to view it?

Trying to figure out how to stop it from doing this - finding it irritating - or is it a 'feature'?
Already checked the preferences menu, but no luck

Ha! Just figured it out, thanks to checking the discussions - in the System Prefs, under 'General', unchecked 'restore windows when quitting & re-opening apps' & that seems to have done the trick

Why does it say there is an error when I attempt to sync it to iTunes?

The first time I synced it, it worked but now when I try, it says there was either a missing file or an unknown error (-37). What does this mean?

Hi staceye,
Where are you creating the PDF file, and what is the error that you're receiving? Is it a file that is saved in your Acrobat.com online account?
Best,
Sara

Why does my ipod not complete playing any song?

Why does my ipod not complete playing any song?

Do they play OK in iTunes on the computer?
How long to they play
Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

HT1386 Why does my sync not complete?

Why does my sync not complete after step 4 of 4 when it says "waiting for changes to be applied"?
I have tried to sync four different iPhones including three 4S and one 5. It does not work for any of them but does not come up with any error message. There is enough room on all of the phone and I have only selected some song, albums, artists and playlists from my music to sync as to not go over the capacity.

Do they play OK in iTunes on the computer?
How long to they play
Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

why does my adobe audition cs6 stop working when i try and make an edit in windows 7?

You might get more help asking in Audition CS5.5, CS6 & CC
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Refresh DSV - why does it keep indicating it "Added" things, when its already been done? (repost from DW forum)

Note to moderator(s):
Please remove the other post
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d4e30da8-5234-4373-963f-c165b99f8df2/bids-2008-refresh-dsv-why-does-it-keep-indicating-it-added-things-when-its-already-been-done?forum=sqldatawarehousing
There were a number of changes done and earlier I had used the "refresh" button in the DSV view, and the updates were reflected in the DSV. Now, however everything should be updates, yet when I hit refresh, the dialog still comes up and list
all the changes it did earlier as "Added". What is going on here?
Now however, all my tables, dimensions, relations etc are setup with no errors and the cube builds, processes and deploys without any errors, yet if I refresh the DSV, I still get the dialog that displays all the things that it "sees" as "Added".
This is even after closing down BIDS and re-opening.
Also, I wonder if this has something to do this this thread, since its concerning the DSV getting "confused"
https://social.msdn.microsoft.com/forums/sqlserver/en-US/33918238-cbe0-4017-bec9-0fe1bad15909/refresh-dsv-gives-net-error-column-argument-cannot-be-null

Hi Shiftbit,
According to your description, you need to know why the dialog still comes up and list all the changes it did earlier as "Added" when there is nothing changed in the data source view, right?
I have tested it on my local environment. We use the sample project AdventureWorks, we didn't make any modification on the DSV and click the Refresh button, and all the changes were list on Refresh Data Source View dialog. So as per my understanding, this
is default settings. If we click the button, it will list all the changes from the date when you create this project.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback Your feedback enables Microsoft to make software and services the best that they can be.
Regards,
Charlie Liao
TechNet Community Support

Why does my form data gets cleared out when clicking on the back button.

Can someone explain why does my form selections get cleared out when clicking on the back button.
I have a JSP page that displays a form with some selections and text boxes. I populate the page and submit the request. The action on the submit call another jsp page, which processes the data and displays the results via a <jsp:include> statement which calls the results page. When clicking on the back button from the results page, it returns me to the form page, but the selections are cleared out.
1. Is there something in my calling of the pages that causes this behavior and can I prevent it?
I notice that the behavior is different when using the IE 6.0 version Netscape 7.1. IE clears the page Netscape 7.1 retains the settings.
If I cannot prevent this behavior does that mean I will have to save the state of the form data. And if I have to save the form data, what would be the easiest method of doing this. I'm a beginner to JSP and Java, but have some ASP experience. I don't understand why the back button in a JSP request clears the form data but a regular HTML page does not can someone explain?
THANKS.

the browser doesn't have to remember what you submitted and fill that back in.
you can't prevent it unless you can ensure a new request to the server in which you can fill the default values in there.

Why does aol not auto enter email addresses when I compose an email?

why does aol not auto enter email addresses when I compose an email?

what a ridiculous decision to change from "starts with" to "contains".
I have a further problem - having selected the address I want from the umpteen options pulled from my address book, I then press enter to add another line for another address.....and the first address I selected changes to a completely different address!
And also addresses from the address book which previously appeared only in black now randomly appear in red.
help please!

Why does my mac pro slow right down when its on battery ???

Why does my mac pro slow right down when its on battery....... cant watch dvds as they keep jumping, internet slows down as does everything, then i run it off the mains and its all fine again, so my mac book pro has not become very portable, please help

Yo , yeah its a mac book pro, noly got it about 6 months ago, not sure if it has a removable battery, it all looks completely sealed, this is what it said in the battery menu:
Model Information:
Serial Number:          W01264M3HD3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0201
Hardware Revision:          000a
Cell Revision:          0158
Charge Information:
Charge Remaining (mAh):          5021
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5923
Health Information:
Cycle Count:          49
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -958
Voltage (mV):          11946
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          No
Charging:          No
Hope you can help, its reallly quite annoying considering its quite new.
Cheers

Why does my macbook pro "goes to sleep" when charging?

Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
I read from threads that it is a logic board problem....How do I solve this problem?

Try an SMC reset. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Why does my Adobe Reader DC stop working when I click scroll down options?

I used to use PDF Suite 2014 Standard to view pdf files.
However, tonight a message appeared when I attempted to open files saying ..."if the document does not load then the pdf viewer may not be able to display this type of document"
I went to the website provided to download Adobe Acrobat Reader DC.
Although I was able to load pdf documents and fill in forms, the program repeatedly would crash whenever I attempted to click on scroll down options on forms.
Any help is appreciated
....and talk/write slowly for I am not super computer literate.
Regards,
Luisa

Dear Aedesh, Thank you for your assistance. I did all that you instructed below, regarding uninstalling, and using the Adobe Reader and Acrobat Cleaner Tool. I restarted my computer, then installed Adobe Acrobat Reader DC (for Windows 7, English and version: Reader DC 2015). I continue to have the problems: (1) When I attempt to use a scroll down option within a pdf form, the program stops working. (2) If I send the pdf to my iPhone, and I open the pdf, I receive the message "Please wait...if the message is not eventually replaced by the proper contents of the document, your pdf viewer may not be able to display this type of document..." However, when I send pdf's created earlier than 4-28-15, I am able to open in my iPhone.I am able to open on my laptop the pdf's created after 4-28-15, but have the scroll option issue (thank you in advance for your patience)Luisa
Luisa Montaini-Klovdahl, Ph.D.Licensed Psychologist &
Captain, US Army Reserves Medical Service Corps4153 Park Blvd
Palo Alto, CA 94306
Telephone: 650.384.6559
Facsimile: 650.384.6547 This e-mail may contain confidential patient information. If you have received this transmission in error, please delete and contact the sender.
From: aadeshs76610910 <[email protected]>
To: Luisa Montaini-Klovdahl <[email protected]>
Sent: Thursday, April 30, 2015 9:55 AM
Subject: Why does my Adobe Reader DC stop working when I click scroll down options?
Why does my Adobe Reader DC stop working when I click scroll down options?
created by aadeshs76610910 in Acrobat Reader - View the full discussionHi Luisa, Please follow the steps below :- 1) Uninstall Adobe Acrobat Reader DC. 2) Run the cleaning tool Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs3) Restart the computer.4) Install Adobe Acrobat Reader DC using this link Adobe Acrobat Reader DC Install for all versions Let me know if the issue persist. Regards,Aadesh If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7499212#7499212 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7499212#7499212 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Why does that entire thread goes to sleep when we put a wait function in time critical loop?

why does that entire thread goes to sleep when we put a wait function in time critical loop but not when it is not time critical

Norbert B wrote:
Ujjval,
in a RT system, priorities have (in general) increased effect on the execution of the application.
It is recommended that you only have a single task in your RT program at "time critical". If you have two task "time critical" (that means you are running into issues caused by your quoted "feature"), you have a flaw in your application architecture.
Since LV 7.1, it is recommended to work with Timed Loops in order to prioritize tasks on a RT system. Timed Loops are executed on priorities between "time critical" and "above normal". Each Timed Loop will execute its content in a single thread in order to keep a good overview of the timing (like finished late [i-1]). Using those structures (and according settings) in a reasoned manner will prevent your RT system to run into priority issues.
Ujjval Shah wrote:
[...]also i would really appreciate if i can get more documentations regarding how LV creates threads and assigns subvis to them[...]
You will have a real hard time to go into this very deep. This is the feature of LV: you can just use multithreading (multicores) without the needed knowledge of scheduling and load balancing. This makes LV programming in general very easy in comparison to e.g. ANSI C (in regard of multithreading). So creation of threads, distribution of tasks to the threads are abstracted and most often not visible to the programmer.
There are some switches and levers you can "play around" in order to make LV to behave differently in this matter. But this most often requires deep LV knowledge and cannot be explained in a simple posting.....
hope this helps,
Norbert
Amen to that!
The question can not be fully answered without digging into the internals of the OS LV is run on because LV works with the OS and lets it do the scheduling.
Yes that note applies to pre- LV 7 RT. When run under RT the ONE Time Critical loop was guarenteed to stay determinisitic.
Since then the Timed Loop was introduced that allowed multiple levels of priority and later allowed us to assign which CPU the code would run on.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Why does the apple tv light come on when I'm not using it?

Why does the Apple tv light come on when I am not using it?

my atv1 does that sometimes
I'm 90% sure that it's because it crashed and rebooted
it's basicly a computer and sooner or later a computer will
crash unless rebooted

HT1539 Why does it hours to complete "processing file" when completing a digital copy transfer to itunes?

Similar Messages

Maybe you are looking for