HT1549 I can't mount on to a volume
I am in major need of help. I used to be able to mount on different volumes that were on my server from any account. I was having trouble with permissions on the volume and played around with them.I put no access to anyone but then changed it back to allow access but it continued to not allow access to the volume. When I looked on the server it said everyone had access to read and write in the volume, but when I looked on an account computer it said everyone had no access. I ran a verify report in Disk Utility on the volume and after that it wouldn't allow me to mount on to the volume.
In server admin I can see the volume under AFP Share Points but when I try to connect to it from an account computer by going Go-> Connect to Server ->my server-> the volume is not even an option.
Under Server Admin when I select the volume and go to Share Point and Protocol Options the Share this item using AFP is checked.
How can I get the volume to show up on my list of volumes to mount?
it fixed itself.
Similar Messages
-
one of my partition is not mounted. I can't mount it, can't repair it. I have a lot of data in this partition, I can't erase it. Please help me.
No way around this. Your phone has to be restored using a computer running iTunes. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
1 of my HD partition suddenly can't mount and want me to initialize! HELP!!
Hi,
If anyone who frequented these kind of problems before please let me know your solutions solving these problems. Thanks very much!!
I'm a musician and a frequent mac user,I have a Power Mac G4 dual 800 with 1.25GMhz ram running on Mac Os 9.21 but with Mac OS X installed (I need to use Mac OS classic due to some of my music softwares still need to be updated before I upgrade to OS X),I've put the Hard Disk in 2 other sub partition HD at the beginning and have been using it to put all my important audio files and songs files. No problems at all before these nightmare started!
The serious problem I'm having now is I suddenly can't mount one of my partition HD anymore.
-I heard weird sound when starting & re-starting the Mac. (Heard some Hard Disk weird sound like sound "crutch" sound" and since the partition can't be mounted, the first thing shows up after I boot the computer is asking me if I wanna Initialize the Hard Disk because it's unreadable. There is 2 choices for me "Cancel" & "Initialize" But there is no effect when I choose "Cancel" so I use the Force Quit.
2 little message saying my Main Hard Disk & the other partition are damaged but they still showing up properly and still running dangerously I think.
-I have tried to start-up by using the installer Disk came with the computer and runs the First Aid Kit to verify the disk. I can see the partition and can see the icon of it but it's just different from others (in a black tone basic classic icon) and after running the verification some following messages appears:
"Mountcheck found serious errors" (in red) then "Overlapped extent allocation,2.60" (in red) and "Hard disk need to be repaired" so I run the Repair mode and it just can't fix because it says it's not been mounted.
I've also checked the main HD and the other partition which sometimes had some problems with it but no problems been found.
-There was few times my computer do Freeze or appears a Bomb asking me to restart when I recording something using the partition for saving the data and a weird sound of hard disk comes before freezing. It seems it's always the same place of the hard disk. Also When I inserted a blank CD-R disk into the drive it just freeze and appears a Bomb message instead asking me if I wanna use the Toast or i-tunes for preparing the disk which I always used to do.
I really hope the computer can hang on just for 1 more month before I have a break to fix everything and backup everything inside or initialize everything inside.
P.S. I've another Powerbook G4 running on OS Tiger but it's mainly for my internet use. ( I don't use internet connection for my PowerMac G4)
And the Combo super Drive is DOWN,I just can't insert any Disk inside anymore. So if having another Mac is helpful for my issue,anything I would try.
Due To I'm having some urgent important jobs now so I really can't initialize or setup other new computers for my works now.
HELP! Thanks!!!Just because you can't find them does not mean they aren't there.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
Can't mount oracle database on linux system
This is same as previous posting just added
e-mail and username info fo forum posting.
I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
[email protected]
nullIt's probably not supported on RHEL5/Centos5/etc., but...
You can get the installer to function using the following steps:
- extract the cal_linux_*.tar.gz, and cd into the OracleCalendar_inst directory
In there is the actual installer, cal_linux.
- the cal_linux is shell script wrapped around some binary blobs. The installer's
problem is that Oracle is setting the LD_ASSUME_KERNEL=2.2.5 environment
variable, which is a mistake on RHEL5. You need to make it not set that variable,
but you need to do so in a way that the size of the shell script does not change at all,
and none of the binary blobs are impacted.
- the approach I took was
mv cal_linux cal_linux.BAK
sed -e 's/LD_ASSUME_KERNEL=2.2.5/LD_ASSUME_KERNEL= /g' < cal_linux.BAK > cal_linux
chmod a+rx cal_linux
cal_linux -i gui
Note: you must have exactly 5 spaces in the substitution part of the sed command, because you're replacing 5 characters (2.2.5), and the size of the shell script must not change.
If you do that, the installer should run (one warning from awk still) and you should be able to install the product.
Tim -
Can't mount database using Oracle 8i on linux
I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ():
I am not able to mount an Oracle database.<HR></BLOCKQUOTE>
Hi ()
My problem is accessing the database with sqlplus system/manager @oralin, on page 55 of the Linux starter kit. Do you notice the space here, between system/manager.. and.. @oralin. I think it needs to be there.
Is your database named Chestnut?
And for Startup, why are you using init.ora? the book mentions initoralin.ora on page 43.
Your configurations are different than recommended in the book. I'm not sure if any of this helps, but maybe you can help me. When I try sqlplus system/manager @oralin, the response is: can't connect to oralin.sql.
According to the book, I need to use @oralin at the end of the command in order to see if I have properly configured the server for MTS, a multithreaded server.
Any ideas? I hope I can help further.
gilles56 -
Can't mount iPod error message
Hi, I am trying to fix a feezing problem on my iPod (on startup the display shows a folder with an exclamation mark) and was trying to do a factory restore on it when I ran into the following error messages.
Installing the latest version of Updater, I tried connecting the iPod and then saw a Windows error message that said:
Cannot Install this Hardware
There was a problem installing this hardware
Apple iPod USB Device
An error occurred during the installation of the device
The specified service does not exist as an installed service
After seeing this error message, Updater then displayed the next error message:
Can't mount iPod
Can someone suggest how I can fix this so the iPod is recognized and I can have Updater restore the factory settings?
Thanks in advance,
Apple iPod 20GB 20 GB 4th Gen M9282LL/A Windows XP ProHave a read the following carefully
http://discussions.apple.com/thread.jspa?messageID=2001071#2001071
Seems that you may need to change your iPod drive no. -
I have determined that I need to restore my iPod based on my problem (I manually update playlists and cannot add a playlist because I get an error message saying "The disk cannot be read from or written to.") So I open iPod updater 11-17-2005 to try to restore my iPod and I get an error message saying "Can't mount iPod". I can't restore or update my iPod because of this error message. Can anyone help me? I've been all through the discussions, online help, etc., and can't find this particular error message. Thanks!!
I came to charge my iPod because the battery went low, after few minutes it came on with this do not disconnect, i tried to restore it also says can't mount, it has been exactly two days. I disconnected the iPod and the backlight and the message did not go off until the battery ran out. I also need some help my address is [email protected] Seriously I just got my iPod click wheel 30Gb color display, video, photo.
-
Can't mount my Galaxy Nexus correctly with MTP
Hello everyone,
I am posting because I can't mount my Galaxy Nexus correctly and I am not sure where the problem is. I am glad for any pointers. I am basically following the Arch Linux Guide to MTP, so moving along I get these outputs:
[root@Caduceus parcival]# mtp-detect
Error: Unable to open ~/.mtpz-data for reading.
libmtp version: 1.1.5
Listing raw device(s)
Device 0 (VID=04e8 and PID=685c) is a Samsung Galaxy models (MTP+ADB).
Found 1 device(s):
Samsung: Galaxy models (MTP+ADB) (04e8:685c) @ bus 4, dev 4
Attempting to connect device(s)
Android device detected, assigning default bug flags
Error 1: Get Storage information failed.
Error 2: PTP Layer error 02fe: get_handles_recursively(): could not get object handles.
Error 2: Error 02fe: PTP: Protocol error, data expected
USB low-level info:
Interface has a kernel driver attached.
bcdUSB: 512
bDeviceClass: 0
bDeviceSubClass: 0
bDeviceProtocol: 0
idVendor: 04e8
idProduct: 685c
IN endpoint maxpacket: 512 bytes
OUT endpoint maxpacket: 512 bytes
Raw device info:
Bus location: 4
Device number: 4
Device entry info:
Vendor: Samsung
Vendor id: 0x04e8
Product: Galaxy models (MTP+ADB)
Vendor id: 0x685c
Device flags: 0x48008107
Configuration 0, interface 0, altsetting 0:
Interface description contains the string "MTP"
Device recognized as MTP, no further probing.
Device info:
Manufacturer: samsung
Model: Galaxy Nexus
Device version: 1.0
Serial number: 01498B301401B014
Vendor extension ID: 0x00000006
Vendor extension description: microsoft.com: 1.0; android.com: 1.0;
Detected object size: 64 bits
Extensions:
microsoft.com: 1.0
android.com: 1.0
Supported operations:
1001: get device info
1002: Open session
1003: Close session
1004: Get storage IDs
1005: Get storage info
1006: Get number of objects
1007: Get object handles
1008: Get object info
1009: Get object
100a: Get thumbnail
100b: Delete object
100c: Send object info
100d: Send object
1014: Get device property description
1015: Get device property value
1016: Set device property value
1017: Reset device property value
101b: Get partial object
9801: Get object properties supported
9802: Get object property description
9803: Get object property value
9804: Set object property value
9805: Get object property list
9810: Get object references
9811: Set object references
95c1: Unknown (95c1)
95c2: Unknown (95c2)
95c3: Unknown (95c3)
95c4: Unknown (95c4)
95c5: Unknown (95c5)
Events supported:
0x4002
0x4003
0x4004
0x4005
Device Properties Supported:
0xd401: Synchronization Partner
0xd402: Friendly Device Name
0x5003: Image Size
Playable File (Object) Types and Object Properties Supported:
3000: Undefined Type
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3001: Association/Directory
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3004: Text
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3005: HTML
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3008: MS Wave
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
3009: MP3
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
300b: MPEG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc48: Description STRING data type READ ONLY
3801: JPEG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
3802: TIFF EP
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
3804: BMP
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
3807: GIF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
3808: JFIF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
380b: PNG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc48: Description STRING data type READ ONLY
380d: TIFF
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b901: WMA
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
b902: OGG
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
b903: AAC
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc9b: Album Artist STRING data type READ ONLY
dc8b: Track UINT16 data type ANY 16BIT VALUE form READ ONLY
dc99: Original Release Date STRING data type DATETIME FORM READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc8c: Genre STRING data type READ ONLY
dc96: Composer STRING data type READ ONLY
b982: MP4
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b983: MP2
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b984: 3GP
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dce0: Display Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
dc46: Artist STRING data type READ ONLY
dc9a: Album Name STRING data type READ ONLY
dc89: Duration UINT32 data type ANY 32BIT VALUE form READ ONLY
dc48: Description STRING data type READ ONLY
ba05: Abstract Audio Video Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba10: WPL Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba11: M3U Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba14: PLS Playlist
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
ba82: XMLDocument
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
b906: FLAC
dc01: Storage ID UINT32 data type ANY 32BIT VALUE form READ ONLY
dc02: Object Format UINT16 data type ANY 16BIT VALUE form READ ONLY
dc03: Protection Status UINT16 data type ANY 16BIT VALUE form READ ONLY
dc04: Object Size UINT64 data type READ ONLY
dc07: Object File Name STRING data type GET/SET
dc09: Date Modified STRING data type DATETIME FORM READ ONLY
dc0b: Parent Object UINT32 data type ANY 32BIT VALUE form READ ONLY
dc41: Persistant Unique Object Identifier UINT128 data type READ ONLY
dc44: Name STRING data type READ ONLY
dc4e: Date Added STRING data type DATETIME FORM READ ONLY
Special directories:
Default music folder: 0xffffffff
Default playlist folder: 0xffffffff
Default picture folder: 0xffffffff
Default video folder: 0xffffffff
Default organizer folder: 0xffffffff
Default zencast folder: 0xffffffff
Default album folder: 0xffffffff
Default text folder: 0xffffffff
MTP-specific device properties:
Friendly name: (NULL)
Synchronization partner: (NULL)
libmtp supported (playable) filetypes:
Folder
Text file
HTML file
RIFF WAVE file
ISO MPEG-1 Audio Layer 3
MPEG video stream
JPEG file
BMP bitmap file
GIF bitmap file
JFIF file
Portable Network Graphics
TIFF bitmap file
Microsoft Windows Media Audio
Ogg container format
Advanced Audio Coding (AAC)/MPEG-2 Part 7/MPEG-4 Part 3
MPEG-4 Part 14 Container Format (Audio+Video Emphasis)
ISO MPEG-1 Audio Layer 2
Abstract Playlist file
XML file
Free Lossless Audio Codec (FLAC)
OK.
[root@Caduceus parcival]#
[root@Caduceus parcival]# mtp-connect
Your system does not appear to have UTF-8 enabled ($LANG="en_US.utf8")
If you want to have support for diacritics and Unicode characters,
please switch your locale to an UTF-8 locale, e.g. "en_US.UTF-8".
Error: Unable to open ~/.mtpz-data for reading.
libmtp version: 1.1.5
Device 0 (VID=04e8 and PID=685c) is a Samsung Galaxy models (MTP+ADB).
Android device detected, assigning default bug flags
Usage: connect <command1> <command2>
Commands: --delete [filename]
--sendfile [source] [destination]
--sendtrack [source] [destination]
--getfile [source] [destination]
--newfolder [foldername]
[root@Caduceus parcival]#
[root@Caduceus parcival]# lsusb
**clipped irrelevant devices**
Bus 004 Device 004: ID 04e8:685c Samsung Electronics Co., Ltd GT-I9250 Phone [Galaxy Nexus]
[root@Caduceus parcival]#
The content of /etc/udev/rules.d/51-android.rules:
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="685c", MODE="0666"
[parcival@Caduceus ~]$ mtpfs -o allow_other /mnt/galaxy/
Error: Unable to open ~/.mtpz-data for reading.
Listing raw device(s)
Device 0 (VID=04e8 and PID=685c) is a Samsung Galaxy models (MTP+ADB).
Found 1 device(s):
Samsung: Galaxy models (MTP+ADB) (04e8:685c) @ bus 4, dev 4
Attempting to connect device
Android device detected, assigning default bug flags
Error 1: Get Storage information failed.
Error 2: PTP Layer error 02fe: get_handles_recursively(): could not get object handles.
Error 2: Error 02fe: PTP: Protocol error, data expected
Listing File Information on Device with name: (NULL)
LIBMTP_Get_Storage() failed:-1
[parcival@Caduceus ~]$
Although it doesn't mount properly, Rhythmbox recognizes and lists the Galaxy Nexus in its GUI. I can even look at the device's properties window. Rhythmbox fails to list any files already on the Galaxy Nexus, though, and I can't transfer anything to it as the following error message in Rhythmbox appears:
Error transferring track
Unable to send file to MTP device: PTP Layer error 02ff: send_file_object_info(): Could not send object info.
Googling for Error 2 brought up some Ubuntu posts from Dec 12 when they had a bug in libmtp 1.1.1, but the current version installed on my system is 1.1.5-1 from the Arch repositories.
Thanks for any help in advance.@all: so you are basically telling me that my Galaxy nexus should properly mount despite the error messages in my Terminal?
@k.sarend: thank you, I'll try that once I get home.
@mzneverdies: interesting point... I didn't think the choice of the DE would have any impact on mounting devices, that's why I posted in the Kernel & Hardware Support section.
(on a side note: I was a Linux user from 2001-2004 and had KDE as my primary desktop. I just came back to (this time Arch) Linux two weeks ago with a new box and I decided to install Gnome since it seems to have progressed more... but really, I am open for both DEs, I'm not a fanboy/evangelist or anything) -
"can't mount iPOD" - unable to restore
Hi,
I would greatly appreciate any advise on the following problem...
My iPOD froze, so I conducted a reset. After the reset the screen displayed an exclamation point and folder icon. After reading the support guidelines on the site I tried the following:
I put my iPOD in disk mode, and fully charged it up (however note that although I have had my iPOD for 14 months the battery still lasts for around 6 - 8 hours).
I ran my version of iPOD updater on my pc which stated "iPOD not readable - needs to be reformatted for use on PC". The only option available to select was the restore option which I tried and the following message was displayed "Can't mount iPOD".
I thought that this message may be because my version of updater and iTunes were old. Therefore, I installed the latest versions - 2005 -11-17 and v6 respectively. However, on trying to run the newer updater again I can't see my iPOD in iTunes, my computer / desktop etc. now even when in disk mode.
Eventually the message "can't mount iPOD" is displayed.
Any idea's on what to try would be great.
Many thanks
John
iPOD Click wheel Windows XP
iPOD Click wheel 40Gb Windows XPAlright. Let me start off by saying that my iPod issue is resolved. However, before I get to the solution, let me answer other questions raised since my last post.
I did try using a different USB port. I even tried my pc at work and it had the same results. Now, for how I resolved it.
After the last post, my iPod deteriorated to the point that it stopped working altogether. When resetting it, it would just come up with the Apple icon and then turn off. Without getting into all the details, I deduced that it was a bad battery. I invested $25.95 into a DIY battery kit. It was a bit dicey performing surgery on my beloved iPod, but with only minor scarring, I now have a fully functional iPod that syncs with iTunes and functions like new.
I'm not saying all "unable to mount iPod" problems are caused by bad batteries, but it could be one of the causes. Coincidentally, my problems started 16 months after starting to use my iPod. That roughly translates to 400+ charge cycles. That's when Apple says the battery performance will begin to deteriorate. I just wish Apple's SW would have some sort of diagnostics that's more accurate. I got the folder w/ the exclamation point, sad iPod and battery icon pictures before figuring out that I needed a new battery!
Dell Dimensions 2400 Windows XP iPod Clickwheel 40GB -
Hello All,
Database can not mount. In this Database domain Administrator mailbox have.
Please suggest. It's very important
The error:
[PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
Confirm
At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
locate the missing log files, don't continue. Are you sure you want to continue?
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"): a
Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
(hr=0x80004005, ec=-543)
Diagnostic context:
Lid: 65256
Lid: 10722 StoreEc: 0xFFFFFDE1
Lid: 1494 ---- Remote Context Beg ----
Lid: 45120 dwParam: 0x51FF5F0
Lid: 57728 dwParam: 0x51FF68C
Lid: 46144 dwParam: 0x51FF709
Lid: 34880 dwParam: 0x51FF709
Lid: 34760 StoreEc: 0xFFFFFDE1
Lid: 41344 Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
Lid: 35200 dwParam: 0x2EFC
Lid: 46144 dwParam: 0x51FFA55
Lid: 34880 dwParam: 0x51FFA55
Lid: 56264 StoreEc: 0x1388
Lid: 46280 StoreEc: 0xFFFFFDE1
Lid: 1750 ---- Remote Context End ----
Lid: 1047 StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
+ CategoryInfo : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
+ FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
:31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
rationTasks.MountDatabase
+ PSComputerName : eg-exchg-01.ABC.comHi,
This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
1. Check the state of database by following command: eseutil /mh "Path of the database"
Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database”
Note:
Make sure you make a backup of the database before attempting any kind of repairs
6. Once the command completes successfully, then mount the database.
7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
Refer to this file about hard repair:
http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
Hope this will be helpful for you -
How can I mount / fix my Windows 7 partition?
So a while ago my Win 7 partition was "unmounted" and it wouldnt show up in my Finder. When I tried mounting it in Disk Utility it would never work. I would click Mount, and it would't do anything. I wasn't really bothered by it since the partition would still show up when I booted and held 'alt'. I could boot Windows fine.
I was experiencing some problems with my Mac so I figured I'd reinstall the OS. After I did however, the Win 7 partition didnt show up in the 'alt' boot menu. In Disk Utility, the partition still exists, and I still can't mount it. I honestly have no clue what to do, other than to start over again. I REALLY dont want to do that, becuase I have a lot of data on my Win partition.
So im asking how the flip do i fix this...
Any help is, obviously, very apprechiated.I think you missed my point. Something you've already done has resulted in corruption of the boot loader or boot block making it impossible for you to now boot from your Windows system via your original Boot Camp installation. Reformatting the Windows partition will just remove everything already installed on it, so that would not sound like a good solution for you.
It may be possible to recover the Windows volume using CampTune, but I don't know that myself. I've not used it. The other possibility is to install a new boot loader:
Boot Runner
The rEFInd Boot Manager - Roderick Smith -
i've got a second hard drive and in doing some copying and the program coming to some error and crashing (no error reported, but it was while using Carbon Copy Cloner and after the copying was finished.
The disk was showing issues and Disk Repair in Disk Utility said it had a Volume Header error that it couldn't fix. when I have the drive in, I can't even boot up (even though it's not my startup drive) It just sits at a blank, gray screen (as if it's about to show the dark gray apple logo and spinning busy thing at the bottom, but it doesn't.
Sounds like this volume header error is causing the problem, but I dont have a clue on hwo to fix it, since I can't even mount the thing.
What if I was able to boot up with the drive's IDE and power plugged in, but the computer won't try to mount it. Instead, I'll mount it using diskutil at the command line. Maybe if I can mount the correct partition, it will 'ignore' the boot partition and I can get it mounted as a temp fix? I just don't know the /dev/xyz path
EDIT: this kind of makes sense to me... if i can go into single user mode on the good drive, plug the second drive in and then manually mount it. if it works, i can run fsck. thoughts?I tried your advice and some other things. Here's what I've come up with:
- both hard drives work
- both can be mounted, but NOT AT THE SAME TIME
- having both connected (physically) at startup causes the computer to hang at the gray screen and never displaying anything more (no apple logo either). there's a little pin beside where the IDE cable goes in, and both drives are properly connected as Master w/ Slave and Slave, respectively.
- i can boot into both. in order to make the volume on the 2nd drive, i just had it archive the OS on there and replace it off my OS X cd. I told it to keep the user data for the new installation, but when i got to the login screen, no usernames worked. by default, the clue option wasn't on, so i couldn't even see if it somehow had an old copy of the password file (although i would think that's a stretch)
The only other info I think I've left out is that the second drive's volume still has its original name, so it's not like it somehow got to become literally an exact duplicate of the original, first hard drive's volume (initially, i wondered if that was the case and that the computer thought it was trying to mount the same volume from two locations) -
Can't mount drive after changing permissions to 777
Hey guys,
I'm having trouble mounting an external hard drive after I changed it's permissions to 777. With "get info" on the disk itself I changed the permissions of me, staff, everyone to read & write access for the whole disk incl. "apply to enclosed items". Now I can't mount it, disk utility tells me it needs repairing, but repair permission and repair disk both fail. It gave me read access at one point but obvioulsy I couldn't change the permissions from there.
It's a 2TB disk in a JBOD enclosure if that makes any difference and was serving as SMB media server for my home network via USB on my router (Linksys E4200).
Any help would be greatly appreciated.
Thanks in advance,
Vworked first time I plugged it in so Jolly Giant you are 100% right
my hub was a powered hub which I chose not to plug in not thinking TM would need power
my question is why? (this is a rhetorical question not one to you Jolly Giant unless you know why)
I purchased a hub which is "powerable" but why leave the "brick" plugged in all the time when nothing plugged into it needs the power?
the external hard disk (at least this model) has power of its own
the printer has power on its own
the Time Capsule has power on its own
All 3 were functioning as expected except in Time Machine when I chose to not plug the hub in
Looks like I will have to burn a little extra energy and plug in my USB hub just to make Time Machine function - this seems fuelish -
Hi
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
Thanks
PTFrom the menu bar, select
▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock. -
How can I mount a CD Drive in Single User?
Thank you for reading my question.
I need to run single user mode on my iMac because of a disk problem. I would like to be able to mount the cd drive while I am in single user mode. I would also like to be able to mount usb hard drives with confidence, so that I can copy off files from the internal hard drive.
I am in single user mode, which I get to by holding down Command-S on startup. I can look at the disks that are attached to my computer by executing
ls -l /dev/disk*
However this appears to be adding disks. I started with /dev/disk2 and /dev/disk2s1 etc which I understand are partitions on that external drive. Now when I list /dev/disk* I have /dev/disk3 and a couple of partitions on those devs. Is that normal? Have I not unmounted disks properly?
I have been using a directory that already exists as the mount point for my usb drives using
mount -t hfs /dev/disk1 /cores
which worked fine. Alas the disk I mounted on that directory was too small. Now I can't mount a disk on there. Do I need to unmount or fix up that assignment?
If I were to create a directory in /Volumes is that advisable? How do I make the root directory readable is that by using 'mount -uw'?
Thank you. Please if you answer my question, try to be clear on what commands to use and why. Bear in mind that other people will read this, and no one on the web seems able to write suggestions very clearly. Maybe we can be the first! If I have not been clear, please feel free to ask for clarification. i am not a total unix newbie. Rather in the 20 years since I was a sysadmin, my memory has faded.
PeteI think you need to post this in a different forum. I think the Developer Forums would be the right choice.
In any event from the little Unix I know you can't mount a removable device until it's connected which means you need to put a CD/DVD into the optical drive. At that point if you enter 'df' you should see the device if it is mounted automatically (which I believe it does.)
In single-user mode the entire drive is readable and all files accessible. You are the 'root' user. In order to put the system into write mode you must enter 'mount -uw /'. Note the '/' at the end of the comnmand line. That makes the entire system writeable.
You do not need to create a directory in /Volumes. When the CD/DVD is recognized an entry in /Volumes will appear unless the disc is unformatted.
Now take some of the above with a grain of salt. I'm certainly no Unix expert.
Maybe you are looking for
-
NV-DA 1 PAL MiniDV camera uncompatible with FCP 5?
Hello, I've been trying to use my Panasonic NV-DA 1 PAL Mini DV camera with Final Cut Pro 5 on my Mac Powerbook and it is not recognizing the camera. Is this 1999 model camera uncompatible now with Final Cut Pro 5 for some reason and why? The camera
-
Extended Receiver & Extended Interface Determination
Hi Experts, Can any tell me what is Extended Receiver & Extended Interface Determination. And the Difference between Standard Receiver & Standard Interface Determination. were to use Extended Receiver & Extended Interface Determination. Thanks in a
-
How much big file can be executed or compiled by JVM/JRE?
How much big file can be executed or compiled by JVM/JRE?
-
I can not get my serial number to work for CS6 when I try to install on new PC
I can not get cs6 to load on my new pc the serial number will not work, It says it is valid but there are no programs on my computer, but i have downloaded them.
-
Safari takes my CPU to 100%
Hi everyone, I have been having a problem for about a month or so now where whenever I use Safari, after about 2 minutes of surfing I hear the fan start going and when I pull up the activity monitor I see Safari taking up 100% of my CPU. It's weird b