HT1551 geting out of range message, what can i do

Hi I am getting the message out of range, what can I do

Hello,
If you don't remember the passcode you can only restore the device. If you restore it with the computer that the device was synced you shoud not have data lost but if you will do it with an other computer your data will be lost.
http://support.apple.com/kb/HT1212
Have you maybe a reset backup? In iTunes or iCloud that woud be realy good aswell.
Hope it helps,

Similar Messages

  • "Rise of Atlantis" Mac game created "out of range" message through switch

    I've got a mac-mini. I've been running the mac game download from apple "Rise of Atlantis" for a while now. I have an older SONY SDM-HS95P DVI/SVGA monitor (capable of 1280 x 1024 resolution) connected to the mac via DVI to SVGA adapter out of the mac mini, and SVGA into the Monitor. No problems when launching or playing the game.
    However, I just added an SVGA Distribution Amp to the chain (capable of 1600 x 1280). So now it's DVI to SVGA adapter out of the mac min, SVGA into the SVGA Distribution Amp, and one SVGA output of the DA goes to the SONY computer monitor, and the other SVGA output of the Distribution Amp goes to my SONY HDTV via it's PC/SVGA input. I did this so I could stream videos off the computer to the TV. This all works well. I change my screen resolution from 800 x 600 (when sitting in front of the computer so all text is very big because of bad eyes) to 1260 x 768 when streaming to the HDTV so the picture fills the screen.
    However, I just introduced a problem with the game "Rise to Atlantis" that I didn't have before I added the distribution amp. When launching the game now, the screen flashes to black and I get an
    "out of range" message. The message stays there, and from the mac mini, I can't even get it back to the normal screen without rebooting the mac mini.
    However, if I remote into the Mac Mini via remote desktop connection from my 27" imac quad core, I can see the game and control the computer. But this isn't a viable solution.
    I have tried setting the mac mini display resolutions to lower, middle and higher resolution settings before actually launching the program, but nothing helps. I also disconnected the SVGA output of the SVGA distribution amp. going to the HDTV to see if that would help, but it does not.
    So it appears that the SVGA Distribution amp. is causing some sort of a hiccup that throws the SONY computer display to black and that "out of range" message.
    Can anyone suggest anything that might allow me to keep things hooked up as they are and still be able to play the game? 'Rise of Atlantis" is a mac game, downloadable from apple, ....but it's the type of game that seems to take over the entire screen....so you can't see FINDER or your desktop when playing it...it's definetly throwing the SONY display into some sort of "take over" mode.
    Any input would be appreciated.

    No, I did not try swapping the outputs as neither is marked primary or secondary, indicating that they were in any way different. However, I did resolve the issue. I didn't realize that in "Rise Of Atlantis" it was automatically set to display FULL SCREEN and that I could set it to NOT do that. I made that change and now I can see FINDER/DESKTOP behind the game while it still pretty much fills the screen and this has eliminated the problem I posted about. However, thank you very much for your input. I appreciate it.

  • I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

    Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

    Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
    Also, is this a Oracle DB?  IF so, has the following 32 bit Oracle Client components been isntalled:
    Oracle Objects for OLE
    Oracle Data Provider for .NET
    Oracle Providers for ASP.NET

  • After upgrading to 10.6.3 TV is only showing "out of range" message

    After upgrading to 10.6.3 my TV (Sharp 37XDE1) is only showing the message "out of range".
    Before upgrading I had no problems.
    Connection is via MiniDisplay Port to HDMI Adapter from iMac 24" or MacBook Pro 13".
    The "Out of range" message could be an indicator that the resolution or the signal speed is not matching properly. I tried to get the signals and resolution in line with the SwitchResX utility but without success.
    (TV monitor was recognized by the display preferences and SwitchResX)
    Any ideas whats wrong?

    HI,
    If you didn't repair disk permissions after you updaed to 10.6.3, do that now.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Signal Out of Range Message

    I have a CTX 17" Flat Panel Display that used to work with my G3 (OS 10.3.9)but now I get the 'Signal Out of Range' message. What does this mean and why could I use it before but not now?

    It sounds like your mac is trying to send a resolution the display can't handle. You might try resetting the PRAM to see if that helps. I think the Mac uses a default setting after a PRAM reset.

  • When I try to register my apple tv, I can't do it, because they ask me for a MPN number that I don't have, because I through out the package. What can I do without having the MPN number?

    I bought my Apple TV in Singapore and I haven’t used it yet. When I try to rent a film, comes the message that may signature is not working for security issues.
    However, when I go to the Apple Web site, click "Support", and then "Register an Apple Product", I can´t do it, because they ask me for a MPN number that I don’t have, because I through out the package. What can I do without having the MPN number?
    Thanks!

    Call Apple Care for your country and ask for help resetting the questions.

  • Out of range message from PC signal strength good...

    my son's dell (xp sp3) sees my new airport extreme with 4 of 5 bars but gives up after a few seconds with a "out of range" message. My daughter's dell laptop works fine.
    any suggestions?
    Rich

    Try temporarily turning off the anti-virus on the SP3 machine as it may be blocking the connection attempt. Try to connect with the anti-virus off. If you can, leave the wireless connection running and then turn the anti-virus back on. You may get a message that you need to "allow" or "authorize" the connection.
    If no luck, the Windows Firewall also frequently blocks any new connection attempts unless you "allow" the connection.
    If still luck, you might want to post in the +AirPort for Windows+ forum as the PC gurus hang out over there.
    Message was edited by: Bob Timmons

  • My 2011 mac mini screen is black and has an "out of range" message

    My 2011 mac mini is hooked up to a monitor and it has a black screen with an "out of range" message. I'm not sure how to fix it. everything is plugged in. please help!

    Reset the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Out of range message on monitor screen

    Have a Mac Mini desktop.  On startup of computer, monitor, everything is normal.   When monitor goes to sleep,  and I wake it up with the mouse, I get an "out of range" message on the screen.  My monitor's resolution specs call for a 1280 x 1024 resolution with 60 Hz.  I have set that as the required resolution, but it still displays the message on a black screen.  I have tried not shutting the monitor off completely and turning it back on, as well as letting it go to sleep after 7 minutes.  Nothing stops the message from displaying.
    Could my video graphics be going bad?   Had some power surges 2 weeks ago with the energy company, and wonder if those surges could have affected my Mac somehow?
    Anyone with a suggestion?

    Hello,
    See if it's related to this...
    The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • 'Out of Range' message

    Newbie here, so apologies if this problem has been raised a million times.
    I have a BT line and a BT Stratus phone/answering machine. I have been having problems with my phone fading out on me, so I replaced the rechargeable batteries, but the same 'out of range' message appeared on the handset and there was no dialtone. I assumed that the phone was the problem, so have bought a new one, which is currently charging up, but it is showing the same 'out of range' message.
    Does anyone know if this is a handset or a line problem? I'll be most miffed if I've paid out for a new phone and it's the line that's the problem!
    Any help would be much appreciated as I'm tired of being without a house phone now. Many thanks.

    If this is a new problem could be other electrical equipment interfering with the signal or some changed physical obstruction even some one else's phone on the same channels not likely to be a line problem
    If any post helps tick the star box on the left
    Just cause Im paranoid dont mean they are not out to get me

  • Photos recently changed from sequential numbering to date/timestamp.  When I import into apps for editing they are out of order.  What can be done to change back to sequential numbering instead of date/timestamp?

    Photos recently changed from sequential numbering to date/timestamp.  When I import into apps for editing they are out of order.  What can be done to change back to sequential numbering instead of date/timestamp?

    The date information is taken from the camera which writes it to the file. This needs to be set to the correct date and time in the camera itself.
    The order the images are shown in the Library mode is set by clicking on the sort button in the tool bar, which if not showing can be activated from view, tool bar. There are different sort orders that can be applied including sorting by file name. You can also sort by dragging the images to the order you wish them to appear in by selecting user order.

  • Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

    Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

    Hello there cubandope,
    If I understand correctly, your iPhone cellular data is dropping periodically, but you can still make calls. I would use the troubleshooting in the following article to help resolve the issue here:
    If you see No Service in the status bar of your iPhone or iPad
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • In my account I need to enter my credit card data, but the computer says: session is running out of time. What can I do?

    In my account I need to enter my credit card data, but the computer says: session is running out of time. What can I do?

    Connect the device to your iTunes library in Recovery Mode using the instructions in this Apple support document and restore it to factory settings.
    http://support.apple.com/kb/ht1808
    B-rock

  • I am trying to download photos to mac from iphone 4s and keep getting message (unreadable files:315) which I say (OK).  Then it throws me out of downloading.  What can I do to get my photos downloaded to Mac?

    Trying to download photos from iphone 4S to a MacBook Pro.  The process keeps getting interrupted/stopped with a notice (unreadable files:315).  When I click (OK), thinking it will download all other photos other than the 315, it stops downloading.  I did this thru Image Capture and also Import Photos in iPhotos.  Both did not work.  What can I do?

    Try:
    - Try another cable.
    - Try another USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    If still problem then it appears the photo files on the iPod are corrupted or you have a hardware problem with the iPod

  • If I forgot to eject my ipod touch from iTunes and took my ipod out of the computer what can happen?

    Can it harm my ipod if this is the first time it's happened? What can it do if you don't eject it from itunes first? Can it harm or corrupt files? How would I know?
    It wasn't syncing at the time I took it out of the computer.

    Nothing will happen.

Maybe you are looking for