HT1551 I cannot set Location

I am unable to set Location

Pat19
It is unfortunate that you are having the same troubles. Thanks so much for trying the steps that we have listed. What do you hear the automated voice say? Please try the following step to resolve:
1. This link will advise how to set up your voicemail the native way by dialing *86 from the iPhone. http://www.verizonwireless.com/support/knowledge-base-14613/
2. Once called please leave yourself a test voicemail to make sure it is all set up.
3. Next reset the Network Settings on the phone. http://www.verizonwireless.com/support/knowledge-base-64531/ The phone will power off and turn back on.
4. After the above steps have been completed and the phone is back on, try accessing the voicemail option via the phone icon.
Thank you for allowing me to help! Please let us know how this works.
TionnaB_VZW
Follow us on TWITTER @VZWSupport
If my response answered your question please click the _Correct Answer_ button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

Cannot set location

I seem unable to set my location. It appears to be London, but I am in Wales!
Any application trying to use location does not work as it is trying to find a location.

Thanks for that. This is particularly disappointing for me as I purchased the ipod touch expressly to be able to use it for a number of apps that require the use of location. I cannot imagine that any "detector" vehicle will travel so far away from the nearest centre of population to "read" my router. Do you know if there is any way of supplying Apple with the required information? Maybe I should ask them!!

Cannot set location in Reminders app

I have my location turned on, and enabled it once again during set up, and the remind at a location option does not appear in the options when you press "remind me" within the reminders app.
I have got an iphone 3GS 16GB and a iPad 2, same problem appears on both devices.
Any help would be appreciated,
thanks.

is 'location services' turned on? specifically for the reminders app?
thats all i got.. if so; maybe restore, and reinstall ios5

Recently purchased song and another I transfered into my ITunes library vannot be set up in a playlist.I get the message"file cannot be located".Originally I could listen to the purchased song but now that will no longer play.What do I need to do to ?

Recently purchased a song from ITunes and another that I downloaded from a CD will not transfer to a playlist and will not even allow me to listen to the songs.I get the message "file cannot be located"What can I do to get my system to locate the file?Originally I could play the songs from my desktop and I was able to transfer to my IPad.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Error 1722 when installing 1.4.2_02... 1.4.2-b28 cannot be located

I'm trying to install Java 1.4.2_02 on Windows XP Professional, but half way through I get an error:
Java Update (1.4.2_02-b3) cannot be installed because the base image 1.4.2-b28 cannot be located.
This then leads to another popup: "Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected..."
I've seen that some people have had a similar problem, but not identical to this. I'm installing in the default directory, but still the problem occurs. Any suggestions?

I found this on the SUN installation notes.
"Choosing an installation path containing characters that are not part of the system code page - On Windows 2000, XP, and 2003, it is possible to name directories using characters that are not part of the system locale's code page. If such a directory is part of the installation path, then error 1722 occurs, and installation is not completed.
To prevent this problem, make sure that the user and system locales are identical, and that the installation path only contains characters that are part of the system locale's code page. User and system locales can be set in the Regional Options or Regional Settings control panel.
The associated bug number is 4895647."
Cheers
Neil

"Cannot set up certs for trusted CAs" and Tomcat

I have succeeded in downloading/installing the JCE component and writing a small java program that ecrypts and decrypts text.
Now that I've tried to integrate this code into a web application, I'm getting the following exception message:
java.lang.ExceptionInInitializerError: java.lang.SecurityException: Cannot set up certs for trusted CAs: java.lang.SecurityException: Cannot locate policy and/or framework files for signer restraint check!
     at javax.crypto.SunJCE_b.<clinit>(DashoA6275)
     at javax.crypto.Cipher.a(DashoA6275)
     at javax.crypto.Cipher.getInstance(DashoA6275)
I've copied the four JAR files into the web-inf/lib directory. I believe that I need to make changes to the appropriate policy file (which I assume is the catalina.policy file under the tomcat/conf folder) but this doesn't seem to make any difference.
Can anybody help??
Cheers,
Ben
PS - I DON'T want to copy the JARs into <java-home>\lib\ext

i've been dealing w/ jdk1.3 and jce
installation, configuration, and exceptions for a day
now. i've recently upgraded to j2sdk1.4.1 and i have
the same problems:
java.lang.reflect.InvocationTargetException:
java.lang.ExceptionInInitializerError:
java.lang.SecurityException: Cannot set up certs for
trusted CAs: java.lang.SecurityException: Cannot
locate policy and/or framework files for signer
restraint check!
can you give me a little more detail around your
explanation. in particular, i can get my encryption
code to run as a command line app using the JDK alone.
its once i try to run the code inside of tomcat that i
get this exception.
so far, i've tried putting all the .jars in my
classpath, as well as web-inf/lib, as well as
jre/lib/ext, as well as tomcat_home/common/lib and
nothing works.
could this still be a provider problem as you indicate
and how does that explain the fact that it works with
the JDK alone?Sun's JCE 1.2.2 and their JCE Provider doing a cross checking of the classes and their signatures. In JDK 1.4 that cross validation were removed, but JCE framework still checking the signature of the provider.
You may also need to check which JRE you are using. On windows you have two of them by default: the one within JDK installation and the another one within "Programm Files". The last one is used by default if you didn't specify the path for java command.
I've been using BouncyCastle JCE and their provider for a while. It works just fine in web-inf\lib directory under the JRE 1.3.1. They also have the signed jar for J2SE 1.4 that does not includes JCE framework.
Note that you have to register your provider dynamically if you going to use it in the web application. You also have to make sure that your web app has enough rights for that (check the security properties if you are using security).
BTW, which app container are you using?

HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps!

Row cannot be located for updating. Some values may have been changed...

Hello,
I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
I've a problem during insert of a record using recordset method (AddNew).
The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
I know that problem is caused by a Before Insert trigger that I CANNOT change.
Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
Other important info:
Cursor = adUseClient (and i cannot adUseServer)
Provider= MSDAORA (version 9.2...)
Oracle server = 9.1
Trigger causing problem = BEFORE INSERT (for each row)
Thanks in advance
Luigi

Hello,
I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
I've a problem during insert of a record using recordset method (AddNew).
The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
I know that problem is caused by a Before Insert trigger that I CANNOT change.
Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
Other important info:
Cursor = adUseClient (and i cannot adUseServer)
Provider= MSDAORA (version 9.2...)
Oracle server = 9.1
Trigger causing problem = BEFORE INSERT (for each row)
Thanks in advance
Luigi

Setting locations with your iPhone 4s

I am pained to admit this, but I cannot figure out how to set locations in my iphone4s that I can set reminders to alert me to do whatever task I had previously set for myself to accomplish when I arrive at the noted location. What types of steps and preferences do I need to select and apply so I can hear Siri tell me as I pull into a lot or walk into a store at one place or another to be reminder of the "note to self" I created earlier to help ensure the purchase of specific goods or anything for that matter! Thanks for helping me out with the awesome function available on my phone that has done nothing but mock my ridiculous inability to master the ins & outs of the program.

Make sure you have an entry in your contacts for yourself that includes your work address. Then, go to Settings>General>Siri and make sure that your contact is selected for "My Info". For other locations, make sure that there is a contact with the correct address.

Cannot set ringtones for people in my adress book

i have wiped handheld twice and still cannot set individual ringtones for people in my adress book that is different than the general ring was able too on my last phone and it was exact same phone

Hello rhwk118,
Welcome to the BlackBerry Support Community Forums.
Can you please clarify what model of the BlackBerry Smartphone you are currently using and the software version it is running. You can locate this info by going to Options>About (3rd line from the top) on your BlackBerry Smartphone.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

JCE SecurityException: Cannot set up certs for trusted CAs

hi,
I am using trying to Jar an application that uses the JCE
package for encryption.
When running the jar file the following exception ocurss:
java.lang.ExceptionInInitializerError: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at javax.crypto.Cipher.getInstance([DashoPro-V1.2-120198])
at com.portland.encryption.Decrypter.decryptServer(Decrypter.java:67)
at com.portland.util.ModelLoad.loadObj(ModelLoad.java:53)
at com.portland.setup.SetUpInit.isUserFrameNeeded(SetUpInit.java:86)
at com.portland.setup.SetUpInit.checkResources(SetUpInit.java:29)
at com.portland.setup.SetUpInit.main(SetUpInit.java:99)
Exception in thread "main"
Is there any way arround this problem???

hi,
I am using trying to Jar an application that uses the
JCE
package for encryption.
When running the jar file the following exception
ocurss:
java.lang.ExceptionInInitializerError:
java.lang.SecurityException: Cannot set up certs for
trusted CAs
at
at
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at
at
at
t
javax.crypto.Cipher.getInstance([DashoPro-V1.2-120198])
at
at
at
t
com.portland.encryption.Decrypter.decryptServer(Decrypt
r.java:67)
at
at
at
t
com.portland.util.ModelLoad.loadObj(ModelLoad.java:53)
at
at
at
t
com.portland.setup.SetUpInit.isUserFrameNeeded(SetUpIni
.java:86)
at
at
at
t
com.portland.setup.SetUpInit.checkResources(SetUpInit.j
va:29)
at
at
at
t
com.portland.setup.SetUpInit.main(SetUpInit.java:99)
Exception in thread "main"
Is there any way arround this problem???A few questions for you:
(1) Have you updated the java.security file to include the SunJCE security provider i.e. :
<JAVA_HOME>/jre/lib/security/java.security
a line should be added into this file as such:
security.provider.n=com.sun.crypto.provider.SunJCE
, where n is the the order of which the security providers to be installed.
(2) You should have all the necessary .jar files for the JCE packages and it should located in this directory:
<JAVA_HOME>/jre/lib/ext
Some developers make the mistake of copying the .jar files into the <JAVA_HOME>/lib directory.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

Set location in runtime..

Hi
usually i used to save file like this
String retreive = textarea.getText();
          RandomAccessFile logfile = new RandomAccessFile("c:\\saved.txt","rw");
          logfile.writeBytes(retreive);
          JOptionPane.showMessageDialog(null,"Saved ..","Saved...",JOptionPane.WARNING_MESSAGE);
          catch(IOException e)
          System.out.println("cannot write on to log file....");
          }But it works correctly , i set location inside that and it will save file as i set the location..
How can i save and decide where to save the file at runtime...
i mean when i press save button i want to select the drives and save it to the folder as i wish...
is there any suitable solution.???

Use a JFileDialog to get the location from the user and use that instead of hardcoding c:\\saved.txt.

SecurityException: Cannot set up certs for trusted CAs

I'm pressed for a solution to meet a delivery deadline - any help would
be appreciated.
I have a method that requests an instance of a SecretKeyFactory. The
method works in a standalone application and in JRun which we use for
development but when i try it in iPlanet iAS6 SP2 I get the following
Exception listed below. (following the Exception is the code that
generated it).
java.lang.ExceptionInInitializerError: java.lang.SecurityException:
Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at
javax.crypto.SecretKeyFactory.getInstance([DashoPro-V1.2-120198])
at
com.intellisales.shared.services.DESede.generatePrivateKeyFromFile(DESede.java:151)
at
com.intellisales.shared.services.DESede.<init>(DESede.java:60)
at
com.intellisales.gbsld1.servlets.BellServlet.doGet(BellServlet.java:169)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown
Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
java.lang.ExceptionInInitializerError: java.lang.SecurityException:
Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at
javax.crypto.SecretKeyFactory.getInstance([DashoPro-V1.2-120198])
at
com.intellisales.shared.services.DESede.generatePrivateKeyFromFile(DESede.java:151)
at
com.intellisales.shared.services.DESede.<init>(DESede.java:60)
at
com.intellisales.gbsld1.servlets.BellServlet.doGet(BellServlet.java:169)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Unknown
Source)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Unknown
Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.applogic.AppLogic.execute(Unknown Source)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at java.lang.Thread.run(Thread.java:479)
public SecretKey generatePrivateKeyFromFile(){
FileInputStream pfis = null;
SecretKey seckey = null;
try {
Security.addProvider(new sun.security.provider.Sun());
Security.addProvider(new com.sun.crypto.provider.SunJCE());
// *** get secret key ***
pfis = new FileInputStream(keyFileName);
byte[] encKey = new byte[pfis.available()];
pfis.read(encKey);
pfis.close();
SecretKeyFactory mykeyfac1 =
SecretKeyFactory.getInstance("DESede");
DESedeKeySpec dk = new DESedeKeySpec(encKey);
seckey = mykeyfac1.generateSecret(dk);
byte[] key = seckey.getEncoded();
} catch (Exception e){
e.printStackTrace();
return seckey;
}// end generatePrivateKeyFromFile
Thanks

hi,
I am using trying to Jar an application that uses the
JCE
package for encryption.
When running the jar file the following exception
ocurss:
java.lang.ExceptionInInitializerError:
java.lang.SecurityException: Cannot set up certs for
trusted CAs
at
at
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at
at
at
t
javax.crypto.Cipher.getInstance([DashoPro-V1.2-120198])
at
at
at
t
com.portland.encryption.Decrypter.decryptServer(Decrypt
r.java:67)
at
at
at
t
com.portland.util.ModelLoad.loadObj(ModelLoad.java:53)
at
at
at
t
com.portland.setup.SetUpInit.isUserFrameNeeded(SetUpIni
.java:86)
at
at
at
t
com.portland.setup.SetUpInit.checkResources(SetUpInit.j
va:29)
at
at
at
t
com.portland.setup.SetUpInit.main(SetUpInit.java:99)
Exception in thread "main"
Is there any way arround this problem???A few questions for you:
(1) Have you updated the java.security file to include the SunJCE security provider i.e. :
<JAVA_HOME>/jre/lib/security/java.security
a line should be added into this file as such:
security.provider.n=com.sun.crypto.provider.SunJCE
, where n is the the order of which the security providers to be installed.
(2) You should have all the necessary .jar files for the JCE packages and it should located in this directory:
<JAVA_HOME>/jre/lib/ext
Some developers make the mistake of copying the .jar files into the <JAVA_HOME>/lib directory.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

Remove ALL Songs that cannot be located

Windows 7, Itunes 10
I have a large itunes library with thousands of songs that now have the Circle Exclamation Point next to them (cannot be located). The ! does not seem to be a filterable column - so I cannot group and remove (using Shift click select approach).
I want to do the following:
1) Ensure all unlocatable songs have been identified and marked with the "!"
2) Select them as a group and delete them.
I tried putting the entire library into a single playlist and playing the play list - assuming each song would be "checked" - no luck. As soon a the play list hits the the first song with an "!" next to it - playlist stops.
Please help me (windows 7 - no mac scripts)
Thanks.

In addition to the tip above these tools will help find files that have been moved/deleted/lost from iTunes and need adding back into the library (or permananently deleting).
*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s really slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
tt2

Cannot set up account track on Konica Minolta Bizhub c250

My problem is that I can't print because I cannot set up my account tracking authentication. I do not have a 'securities' pulldown in my printers 'installable' options.' The only pulldowns I have are...
'Paper Sources'
'Finisher'
'Punch Kit'
'Saddle Kit'
checked box for 'Printer HDD'
unchecked box for 'Duplex Unit'
The driver that I installed (Mac OS 10.5.x - Drivers -Postscript Drivers-Version 3.1.4) was recovered from this website, it is located on the lower quarter of the page:
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=831&fil etypeid=0
I had previously installed the wrong OS driver for this printer, but I believe I have successfully deleted all remnants of that install because when I installed the OS 10.5 driver, additional options were available in the installable options menu, yet none of them were the securities option needed to set up an account track profile.
Any suggestions or specific places where I can find a proper driver, or perhaps get account track to work with the options I have available?
Thank you to anyone who even got through this entire post,
Stefan
Message was edited by: b0rderman

Managed to check the driver this morning (sorry for the delay, was out of the office yesterday). I created a printer queue using the C250 driver and as you said, on install you are prompted to select several finishing options, but nothing about using the security feature. However, when I then selected to print a document, the Security menu was present in the print dialog, appearing at the bottom of the other extended features of Finishing, Quality and Setup.
I then changed the setup of the driver options and disabled the HDD setting, thinking that maybe the feature does not appear if no hard drive is in the printer, but even with this setting disabled, the Security menu was still present.
So, I haven't been able to stop the Security menu from appearing in the print dialog. And in response to your question, there is no way of adding a plugin to your print dialog. The print dialog extended features appear because they are listed, or enabled, in the PPD for the printer. When a user selects that feature in the print dialog, then the PDE plugin is called by the print system.
Looking at the C250 ppd, shown below, you can see that the Security feature is listed as a dialog extension, the same as the other three you see in the print dialog.
*APDialogExtension: "/Library/Printers/KONICAMINOLTA/C250/PDEs/KONICA MINOLTA C250 Finishing.plugin"
*APDialogExtension: "/Library/Printers/KONICAMINOLTA/C250/PDEs/KONICA MINOLTA C250 ImageLayout.plugin"
*APDialogExtension: "/Library/Printers/KONICAMINOLTA/C250/PDEs/KONICA MINOLTA C250 Setup.plugin"
*APDialogExtension: "/Library/Printers/KONICAMINOLTA/C250/PDEs/KONICA MINOLTA C250 Security.plugin"
So, at this stage I cannot see why your print dialog would not be showing the Security plugin. What protocol did you choose when you added the C250 printer queue?
PaHu

HT1551 I cannot set Location

Similar Messages

Maybe you are looking for