HT1551 I get a picture but no sound

I can get video to stream, but no sound.

Hi Kipp Utemark,
If you are havin audio issues when streaming video to your Apple TV, you may find the following article helpful:
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Regards,
- Brenden

Similar Messages

I get the picture BUT NO SOUND - HELP!!!

Hello all,
I need help just bought apple tv and connected to my flatscreen samsung 1080p to the tv hdmi4 and i get picture but NO SOUND!! Am I missing a cable?? Do I need something else?? What do i do ???

I'm not familiar with your Denon specifically, but my Onkyo A/V amp has a settings menu for each input. Check the settings for the HDMI input you have the ATV connected to and make sure they are correct for your TV.
Also, as I mentioned previously, you could connect your ATV back to your TV directly with the HDMI cable, then connect the optical audio output on the ATV to an optical audio input on your Denon, then make sure it is selected when you watch the ATV to get digital sound.

HT5900 I've just bought my Apple TV 3rd gen and set it all up but when I play netflix I get a picture but the sound is a really loud cracking sound. Does anyone know how to fix this??

I've just an Apple TV set it all up but when I play netflix the sound is really crackling. I can't hear anything else but the crackle. I can see the movie fine..

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
CD's are ok.
Toshiba repair agent says it is a software problem and they only deal with hardware problems.
Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

Pavilion g6-1b70us. Picture but no sound from tv when using HDMI. Previously worked no problem.

I have a pavilion g6-1b70us that I am trying to hook up to my tv with an hdmi cable. I get a picture, but no sound. This previously worked with no problem. When I pull up my sound playback settings the only options are speakers and headphones. When I pull up my devices, the Samsung tv is there, but is described as a "generic monitor" (thought that was weird). I have uninstalled and reinstalled my intel graphics driver and IDC audio driver but still no sound through TV. Also, I will mention that in under control panel>devices and sounds there is a link to SRS Premium Sound. As you can see in the picture below, the Samsung device shows up, but it is grayed out and cannot be selected. Can someone please help?
This question was solved.
View Solution.

Well in case anyone is interested I fixed the issue (only took me 12 hours to figure out, lol). Apparently even though the Samsung tv was not appearing in the sound playback options, you can still right click in the blank area and an enable/disable option will appear.

Itunes - Video file conversion (Picture but no sound)

When I convert videofiles (avi, wmv) to Ipod/Iphone using Itunes i get the picture but no sound.
Please help me.

It's an issue with the file being multiplexed (a.k.a muxed, where the audio and video tracks are interleaved together into one track). iTunes can't export the audio from these files. Read more about it here:
http://support.apple.com/kb/TS1721?viewlocale=en_US
And then here:
http://support.apple.com/kb/HT1588?viewlocale=en_US
You can download a 3rd party program that will convert the files for you so they work properly. Check out this link:
http://castfortwo.blogspot.com/2007/10/convert-muxed-mpeg-1-to-mov-or-mpeg-4.htm l
I hope that helps. Good luck.

I get picture but no sound on my hd dvd player everything else works help!!!

I have a sabre (hd) coby hd dvd player. I get picture but no sound. My cable works and i can stream. It was working ut now its not

Certainly has nothing to do with Comcast, but you can always try unplugging/replugging whatever kind of cable you've got between the DVD player and the TV, and if using component, make sure all 5 connections are secure on both ends.

HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
You might try a 3.5mm to RCA adapter
from the Mac Mini's headphone jack to the TV's audio input,
but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

VGA picture but no sound

I have a Toshiba laptop and a flat screen Sceptre TV. I hooked a VGA cable to my computer and laptop and got a good picture, but no sound. The sound still comes through the laptop and not the TV. Is there a setting I need to change?

A VGA cable doesn't transmit audio. You'll need to use separate cables to transmit audio.
- Peter

Connected ipod to tv, picture but no sound

i have a 30GB and i'm connecting to my tv witha 3rd party set of RCA cables i can see picture but no sound. don't know how to fix, did i do something wrong when i converted files or what? help, please

Do you have to play them online
Yes; if a game does not require a web connection after it is loaded, you can go on playing it after moving out of range of the hotspot.
(31620)

I am trying to move my albums with the pictures to a flash drive but I get the pictures but not in the album.

How can I move my albums, including the title of the album , with the pictures to a flash drive. Every thing I try I only get the pictures but they are not in the album.

Create a folder on the Desktop with the ablum name. Then export the contents of your iPHoto album into that folder. Drag the folder onto the flash drive.
OT

24" new, has picture but NO Sound (ps3)

just got a new 'Model:24SL41OU' Toshiba 24" tv from best buy today.
ive hooked up my ps3 to it and it has picture, but no sound
i have tried
-resetting ps3
-unplugging tv for 10 minutes
-have used both PS3 optical sound output and the regular red/white output. neither setting/cable works
-went into menu setting, tried different sound settings, but nothing has worked
i know its not my ps3 since it works on my other tv, so i have no idea whats wrong. im doubting its not a faulty TV since its new, but i have no idea how to fix this no-sound problem. really frustrating...
anyone know how to fix it?

What type of video connection are you using?
- Peter

Using Thunderbolt, I get good pix but no sound?

Using Thunderbolt, I get good pix but no sound.... How do I fix this problem?

http://support.apple.com/kb/HT4241
Moshi has a complete guide on how to make the sound work

Any ideas why a film I have converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?

Any ideas why a film I have converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?

See:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos

After 1.6.2 update, I have hd picture but no sound, tv says hdmi audio unavailable

I have hd picture but no sound, tv says hdmi audio unavailable , this happened right after update 1.6.2 my television is an HP PL4260N, I saw on other post in fixya.com other people with same problem after update too. Any ideas on fixing this? I already spent 2hrs with tech support trying to fix this and no luck, they had me use components I never had any problems before this update, is there a way to go back to 1.6.1? One more thing my standard channels work fine (video & audio)

You may need to revert to using component cables until they hammer out the issues with HDMI. Just hang on to that HDMI cable for future use when these issues are resolved. You will not see a degrade in picture quality with component cables. Only downside is the added cabling mess.

HT1551 I get a picture but no sound

Similar Messages

Maybe you are looking for