HT1551 Is setting the date and time a one-time process?

Is setting the date and time a one-time process?

What exactly do you mean? You don't know how to set the time? You set the time but something changes it?

Similar Messages

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

Set the date and time

how to set the date and time in apple tv?

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Setting the date and time on my Verve 450 answerin...

I have set the time and date on all the handsets, but when we pick up a voicemail, the date and time on the message bears no relation to reality! The instructions do not provide any advice on setting the date and time on the answering machine.

Well after i change it it seems fine, but when i use it another time it has been changed.

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

Welcome to the Apple Community.
A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

My Apple TV won't set the date and time! What can I do???

My Apple TV won't set the date and time! What can I do???

That means it's having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic. Ensure router is up to date, reboot all devices. If on wifi try ethernet.

HOW DO I SET THE DATE AND TIME ON MY HP OFFICEJET 8600

just bought the HP officejet 8600 all in one printer, and I cant seem to set the date and time for the fax portion of the printer, please help.

Set the date and timeOn the control panel, touch the Right Arrow ( ), and then touch Setup ( ).Touch the Down Arrow ( ), and then touch Preferences .Touch Date and Time: , and then touch the Up and Down Arrows ( ) to set the month, day, and year.Touch Done , and then touch the Return Arrow ( ) to return to the Preferences menu.Set the language and country/regionIn the Preferences menu, touch Language .Touch your preferred language, and then touch Yes to confirm your choice. The product returns to the Preferences menu.On the Preferences menu, touch Country/Region , and then touch your specific country/region.Touch Yes to confirm your choice, and then touch the Home icon ( ) to return to the main menu.

How do I programatically set the date and time of my FP-2000 in LabVIEW RT?

I checked out the following knowledgebase document which has a tool for setting the system time, but I also need to set the date:
http://zone.ni.com/devzone/explprog.nsf/ 6c163603265406328625682a006ed37d/ 37175dbc3696a1ac86256a850051097d?OpenDoc ument
How can I do this?
-Jim

That is great, Steven. I also found a solution using GetSystemTime and SetSystemTime which are functions in kernel32.dll that get and set the system date-time. This function call worked on the FP-2000 that I have and should work on RT-Embeded systes, as well.
-Jim
Attachments:
GetSystemTime.vi ‏16 KB
SetSystemTime.vi ‏14 KB

How to set the date and time format from Windows Server 2008 R2

Hi,
I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
Yoshika04

Hi,
In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
time format. For more information, please refer to:
Regional Options Extension
http://technet.microsoft.com/en-us/library/cc754496.aspx
Regards,
Bruce

How to set the Date and Currency Formats Based on Country

Hi Friends,
I am designing the one Global Form it will use for all countries.
in that Form i want to print the date and currnecy Formats based on country.
Like
For US i want print the date and Currency Like This.
Date - MM/DD/YYYY
Curremcy - XX,XXX,XX.XX
For DE i want print the date and Currency Like This.
Date - DD.MM.YYYY
Curremcy - XX.XXX.XX,XX
Please suggest how i can control these things through Java Script or Formcalc....

Hi Nitin,
thanks For ur reply,
i tried with this solution,
But it is displaying the default Format like bellow formats.
For short - mm/dd/yy
For Medium - mmm dd , yyyy
For Long - thursday ,mmm dd , yyyy
it was prinitng in above mentioned format,
but here i want to print my own format for USA like MM/DD/YYYY.

Why can't I set the date and time insert to the format I want?

I would like the date to be formatted in the short form on my docs. However whenever I insert date and Time it always come out at the long form i.e.
Monday, 15 April 2013.
Right clicking allows me to edit it but the next time I inset it the long form re-appears.
I've tried to do it via the system preferences > language and text > region > customise route but the same thing thing happens. I choose the short form at the top of the choices but it still comes out in the long form on the docs.
Only a minor point but it is irritating 'cos it should be simple (probably is 'cept I'm a bit slow).
I'm running Mountain Lion 10.8.3
Thanks
W.

Wilfred. I found this in one of the More like this posts >>>>> opposite your first post. It might apply if you are on Pages 08. Insert Date/Time: Apple Support Communities
I would never have thought of double or right clicking on the date itself. I haven't tested it to see what formats exist. One last suggestion, if we don't resolve it here, write a new post and put it in the iWork pages columns. There you may meet up with the gurus in that persuasion.

My laptop died last night and the date and time was set for 1/1/2000. I went to change the date and time and cannot. For some reason when i pull up system preferences it will not load date and time but will load other stuff. Please help.

Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.

Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

HT1551 Can't seem to set te date and time...?

We are setting up our Apple TV...we can't seem to set the date and time....it just keeps searching?

All good....the wifi wasn't turned on.....!

How do I import photos from a memory card that didn't have the date and time set yet?

Aloha,
So I got a new 5dmark 3 and I was shooting a wedding and didn't set the date and time before I started shooting. When I uploaded the images to Lightroom they uploaded all over the place and not in order. Is there a way to upload to lightroom and keep them in order?
THanks so much,
Eric

You can change the sort order to filename. That's what I prefer to use, and it keeps my images in shooting order.

My new apple tv says that the date and time can't be set

My new apple tv say that it cannot set the date and time

I'm having the same issue today on several of our Apple TVs. I am the Director of Technology in a school district and starting this morning I am getting reports that Apple TVs are not working and upon investigation they all sit at setting date and time. All network setting are properly configured. The firewall is set to allow port 123 both TCP and UDP from all internal clients. It occurs both over WiFi and Ethernet.
Is the Apple Time Server experiencing issues?

HT1551 Is setting the date and time a one-time process?

Similar Messages

Maybe you are looking for