HT1551 just updated my apple TV and whit light is flashing continuously and nothing is on the screen anymore.
Can anyone help with this please?
Just updated the Apple TV and the white light is now flashing quickly and nothing is on the screen. Can't access it with the remote from the Ipad.
Same problem here. Long time Apple fan, own lots of their products... Greatly disappointed.
Bought a brand new Apple TV, worked fine for 3 days but then the picture went blank (possibly after an auto update?) and I observed a quickly flashing white light on the Apple TV. Manual indicates this means it is "having problems" (no kidding) and recommends restoring the software via a micro-USB cable (cable not provided).
Acquired a cable and attempted this fix but after following the procedure the Apple TV never showed up in iTunes, so I'm unable to perform the restore. Returning the device today, not sure if we want to get another or just give up and save the $100.
Similar Messages
-
Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks
I just had this issue. Go into settings and reset the Apple TV after the firmware update. (note just "reset settings" and NOT back to factory settings)
-
My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!
Was the restore done via iTunes?
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
If so then you may need to take it to Apple. -
Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I just updated my Apple ID to a current email address, it worked on my laptop but my phone is still using the old one and neither password works. I can't download or use anything other than phone calls and texting on my phone now. Help!
go to settings
then to store
tap your id then click sign out
then sign back in and you should be fine -
just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy
Is the iTunes window in FullScreen mode?
If so, press esc key. -
Just updated my Apple TV and all it shows now Is a picture of it needing to be plugged into iTunes, do I really need to buy a micro USB cord? This seems absurd!
This indicates the device is in recovery mode.
Connect it to a computer running iTunes and restore it. -
HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all. Help
I just updated my Apple TV 2 and now it is flashing and not working at all. Help
I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu. Per Winston's suggestion, I logged out of iTunes and then tried to log back in. I am getting a message "the server is not responding- please try again later".
FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
Sounds like the update has overwhelmed the Apple servers.
Dave -
HT1551 I updated the software and now nothing responds. The white light is flashing
When I started my Apple TV it said there was an update so I ran it, now I can't connect. The white light is flashing.
Same here. Anyone have any help?
Thanks,
Aaron -
When I plug in apple tv the status light just blinks amber and nothing appears on the screen
When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen. The status light never turns white and won't stops blinking amber. I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings. Is there a way to wake it up or is it a lost cause?
Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this. -
I have just updated my iPad to IOS 8.1.3 when I now try to open the emails nothing comes up and then the app crashes and returns to the home page. What should I do?
Since yesterday morning about 11:00 I have been having TERRIBLE email problems on this iPad 3G. Email comes in (I hear the sound) but nothing displays -- no folders, no content, no nothing in e-mail. The blank email screen shows up and then disappears after about 10 seconds, taking me back to the Home Screen.
Right now, the only way I can see email on this device is to log onto AOL via the AOL app.
I have been doing a lot of online reading about the problem. It has to do with iOS 8.1.3 and it affects older iPads and iPhones. I'm having no problems on my iPod touch, which -- fortunately -- is so old it cannot update its iOS 6.
I waited to update the iOS on this iPad until iOS 8 was "mature." That was about 2 weeks ago.
Anybody know know if Apple is aware? working on a solution? -
Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
I just updated iOS on my iPhone 5.
What a shock!! Where is the premium look and feel I bought my iPhone for?
If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.
-
I just purchased an APPLE TV. I also own a ROKU and found a great app to use instead of the included remote, is there a similar app to purchase for my new apple device.? I like a keypad to use when typing in info.also is there any way to get the Glen Beck steamed in on the Alpple TV?
Glen beck is a conservative news commentator , he now has a tv Chanel broadcasted only by the Internet, is is GBTV I get it on ROKU. I cannot get that or FOX NEWS or CNET on my new apple TV. Love the new device with the exception of my missing networks. By the way, thanks for the remote advice it works great.
-
My Apple TV is not responding anymore and white light flickers
My Apple TV does not respond anymore and white light flickers all the Time. No connection anymore.
In that case if you've already tried unplugging from power, waiting for a minute or so and restarting and nothing helps, you probably ned to factory restore via iTunes:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
Maybe you are looking for
-
ON THE CANON mg3520 CONNECTED to my PC via cable to Computer with Windows 7, How do i find the IP ADDRESS for the MG3520?
-
Trying to add month with a Date
Hi All, I am trying to add month with a date. it will take the earlier month and add one month . Here is my code declare @CollectionDate date='10-30-2014' select @CollectionDate ;WITH CTemp AS ( SELECT TransactionDate=CAST(@CollectionDate AS DATE) ,R
-
When I am running "Preview" of few images and minimized 1 of them, if I double tap the tracking pad, magix mouse etc..., the gesture should show me what is currently open, the upper part of the screen and what is minimized, in the lower part of the
-
I am a photographer and I downloaded order software from Miller's (ROES software). The software would not install correctly and now when I open a finder window the 'double click to install' is showing up like a ghost from their installation window? A
-
Option of viewing a video frame by frame
Hi, I wanted to view a video frame by frame using JMF ( I wanted to include an option for the user either to view it frame by frame wherever necessary or just play it normally). I have seen programs in this forum for extracting the frame images of th