HT1551 My Apple TV has been working perfectly for a year now it doesn't.

My Apple TV has been working fine for a year, and now it plays about a minute and "An error occurred loading this content" screen comes up. This has been going on for 2 months.I tried to use it with Netflix and with movies purchase through the Apple store. Iphone sych also does not work.

Hi Brian - The light at the front of the ATV indicates it is on. I can't see it on the iOS remote app. Actually, I installed the app and when I went to the ATV it said 'no signal'. So, I am not sure if it is coincidence or what, as I did NOT go to the settings on the ATV and change the remote setting. I can't set it to another TV, can I set it to my MacBook to check? Thanks a lot by the way!

Similar Messages

My ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249

Extend a network worked fine for 2 years, now it doesn't

Sorry I'm not at home so I've gotta go off bad memory...
My setup has worked fine for a number of years. A non-simultaneous dual band Extreme is the main base station. I have a Express ethernet-ed to the network working without issue. There's also a newer Extreme farther away that has been wirelessly extending the network without too much issue until now. Airport Utility pops up now saying the newer Extreme is unable to extend. All I attempt to do is restart because all my settings seem to have been fine. Original base set to create with extend checked, and the newer Extreme set to extend with the same ssid, password etc.
So what's changed if I haven't changed anything? Newer versions of something?
Thanks for any input.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

HT5312 My email address hasnt changed for many years and my apple password has been the same for 2 years since i bought the ipad i had purchased things the day before you said i had never used the device before, WHY DID YOU DO THIS

Why was my account suspended

This is a user to user tech support forum. Apple is not here. Apple does not answer questions here. No one here knows who your are or anything about your account.
iTunes Support -
http://www.apple.com/support/itunes/

College requested I install firefox in order to operate within Blackboard. Has been working fine for one week, now unable to use enable HTML button. Getting incompatible browswer message and firefox version unknown. How do I fix?

Very frustrating - I have done all of the plug-in checks. Everything is up to date. I have re-booted my computer. The college is using Blackboard version CE8.0.5. I am Windows XP. What else do you need to know?

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

Computer shuts down and starts up by itself. I have 27" mid-2011 model. Has been like this for 2 years now. The hard drive and the mother board has been replaced already. No help, the problem still returns.

This morning it started again.
When I write the word "shut" to console it says:
kernel[0] Previous shutdown cause: 0
locationd[55] locationd was started after an unclean shutdown
kernel[0] Previous shutdown cause: -128
locationd[55] locationd was started after an unclean shutdown
locationd[54] locationd was started after an unclean shutdown
kernel[0] Previous shutdown cause: 3
Yosemite is installed. But the problem has happened with every operating systems.
Disk utility can't find any problems.
No usb or other devices are connected.
I deleted the file: com.apple.PowerManagement.plist (someone suggested that it may help)
I think it's not the matter of heat, because the problem occurs right away when starting my comp.
With a safe mode it sometimes stays up for hours. So could it be a problem with applications, rather than hardware?
Help is highly appreciated!
Thank you!

Thank you, I did ran etrecheck.
Here's the result.
Now my computer did shuts down even in safe mode, sometimes in seconds.
So I have to keep this short.
Hardware Information: ℹ️
    iMac (27-inch, Mid 2011)
    iMac - model: iMac12,2
    1 2.7 GHz Intel Core i5 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 0/DIMM1
            Empty
        BANK 1/DIMM1
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6770M - VRAM: 512 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 0:2:47
Disk Information: ℹ️
    ST2000DM001-1CH164 disk0 : (2 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 2.00 TB (1.68 TB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [not loaded]    com.wacom.kext.ftdi (1 - SDK 10.9)
        /System/Library/Extensions
    [not loaded]    com.wacom.kext.wacomtablet (6.3.10 - SDK 10.9)
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.systemstatsd.plist
    [failed]    com.apple.ucupdate.plist
    [failed]    com.apple.watchdogd.plist
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist
    [not loaded]    com.adobe.AdobeCreativeCloud.plist
    [not loaded]    com.wacom.wacomtablet.plist
Launch Daemons: ℹ️
    [not loaded]    com.adobe.adobeupdatedaemon.plist
    [not loaded]    com.adobe.fpsaud.plist
    [not loaded]    com.microsoft.office.licensing.helper.plist
User Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist
    [not loaded]    com.adobe.ARM.[...].plist
    [not loaded]    com.spotify.webhelper.plist
User Login Items: ℹ️
    iTunesHelper    Ohjelma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Spotify    Ohjelma (/Applications/Spotify.app)
    SpyderUtility    Ohjelma (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
Internet Plug-ins: ℹ️
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6
    Flash Player: Version: 16.0.0.305 - SDK 10.6
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.1.0
    Silverlight: Version: 5.1.30514.0 - SDK 10.6
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    WacomTablet [Click for support]
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 2.00 TB Disk used: 316.51 GB
    Destinations:
        My Book [Local]
        Total size: 2.00 TB
        Total number of backups: 8
        Oldest backup: 2013-11-03 12:06:31 +0000
        Last backup: 2015-02-17 10:06:36 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 316.51 GB X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         0%    AppleSpell
         0%    ps
         0%    fontd
         0%    launchd
Top Processes by Memory: ℹ️
    94 MB    Finder
    86 MB    WindowServer
    73 MB    Spotlight
    69 MB    com.apple.internetaccounts
    64 MB    NotificationCenter
Virtual Memory Information: ℹ️
    589 MB    Free RAM
    1.91 GB    Active RAM
    1.34 GB    Inactive RAM
    451 MB    Wired RAM
    1.04 GB    Page-ins
    193 KB    Page-outs
Diagnostics Information: ℹ️
    Feb 27, 2015, 12:16:17 PM    /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-02-27-121617_[redacted]. crash
    Feb 27, 2015, 12:08:32 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/fontd_2015-02-27-120832_[redac ted].crash
    Feb 26, 2015, 08:19:12 AM    /Library/Logs/DiagnosticReports/WacomTabletDriver_2015-02-26-081912_[redacted]. crash
    Feb 27, 2015, 12:46:20 PM    Self test - passed

PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a yhearÉ

PSE12 editor stopped working - sas elements 12 editor not working - how can i get editor to work - which has been working fine for a year nowÉ

Thanks for the quick response ...
I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ...

HT5569 iPad 2 (ios 7) has been working perfectly fine, but suddenly has ceased to connect to home wifi

My iPad 2 (ios 7) has been working perfectly fine for years. All of a sudden it's stopped connecting to my home wifi. The password is not recognised, even though it is the right password. I've tired the reboots and forget network etc. The renew lease option is not there, maybe because I reset all network settings. It's just puzzling. I haven't changed anything; my HP laptop is fine. Why would my ipad suddenly do this? is it just an ios7 glitch that apple haven't addressed yet?

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

HT201250 My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?

My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can’t be copied onto the backup disk because it appears to be read-only. How do I fix it?

Hello,
http://pondini.org/TM/C6.html

My Apple TV has been working fine, even earlier today. When I turned it on this afternoon, the TV indicated that "no signal" was being received. Restarted, unplugged, reset by holding menu and down button, etc. still no signal. Thoughts?

My Apple TV has been working fine, even earlier today. When I turned it on this afternoon, the TV indicated that "no signal" was being received. Restarted, unplugged, reset by holding menu and down button, etc. still no signal. Thoughts?

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Sim not provisioned, yet my iPhone has been working perfectly

Can anyone please help me
My iPhone has been working perfectly but now says sim not provisioned?

Could be an error with the SIM itself or some glitch on your account? I would call your carrier's tech support number and ask them about it - it may be something they can deal with over the air, or they may need to get you a new SIM.

My iPad 3 wifi connection has been working perfectly.

My iPad 3 wifi connection has been working perfectly. Now I have lost automatic connections and when I join wifi told it is the wrong password. IT IS NOT. I have reset the network settings and can then connect with no problem. Keeps happening every time I try to join another wifi connection. Seems I can only store one connection at a time. This is a new problem and previously all of the connections I am tying to join worked absolutely perfectly. Is this a software update problem?

Thanks. Seems unlikely that several Wi-fi routers that were working fine have simultaneously stopped doing so.
Have tried a full system reset and set up the ipad as a new device again. Will find out whether that has worked when I try to connect my next wi-fi router tomorrow morning. I will also double check with the other ipad users whether they have been experiencing any problems with the router I could not connect to today until I reset the network settings.
Thanks again

I have a Targus Versavue bluetooth keyboard that has worked perfectly for 2 years. It lost connection yesterday. I charged the battery but it still won't connect. Help ??

I have a Targue Versavue bluetooth keyboard that has worked perfectly for 2 years. It lost connection yesterday. I charged the battery but it still won't connect. I just get a blinking blue light. Help ??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

TS5183 My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore..:-( this has been playing up for some time now.

My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!

Have you got Siri turned on in settings/general/restrictions?

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated

My ipod 4g has been working fine for the last 2 years until now, it wont charge or connect to itunes what so ever. it will connect to the dock and play music but just wont charge on any charger, computer,cord,anything. its making me so frustrated i think it has somthing to do with the battery but im not sure because it still turns on. Im for sure that its the ipod and not the cord or outlet and charger. somone please help!!!!!! I tried everything besides opening it up.
I dont know what to do???????

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT1551 My Apple TV has been working perfectly for a year now it doesn't.

Similar Messages

Maybe you are looking for