HT1551 My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times
My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?
Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.
Similar Messages
-
My husband's 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Please advise what our next step should be. Thank you for taking the time to read this post!!
Just to double check you tried eveyrthing take a look at this link http://support.apple.com/kb/TS1398 .
Can also try powering off the home router, then the phone, and then power up the router wait for the signal and then power up the phone and see if he can connect. -
i find that i am suddenly logged out of program or an app or website, and i am back to the HOME screen. i have to log back in and sometimes i find back exactly where i left off, some stuff i have entered or written, or sometimes i have to start all over again and re-enter data or write back what i seem to have lost.
i tried a different browser and it does not solve the problem. i tried different apps, website and programs and it happens anywhere and at any app, program or website.
apple staff suggested a complete restore of the IOS software, which is quite an involved process. does anyone know of any possible causes and a simpler
solution without having to reset the entire IOS 7.0.6Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
I have no idea how to do this.
Over The Air updating came with iOS 5 so you do have to update using iTunes.
I would recommend always updating using iTunes, my personal and very unscientific resrearch into the problems that many people have with updates and then having poor battery life and wifi issues indicates that the common thread among them and not being able to resolve the problems seems to be updating OTA. I would always update using iTunes. -
I've bought a new remote for my apple TV and now I can't access the menu
I just bought a new remote for my Apple TV since I lost the original one. Now I cannot access the menu as all I get is the standard "screen saver". Even then, sometimes it won't even turn on, so I have to unplug it and wait two minutes and then plug it back in. Regardless if I do that or not...........the best I ever get is the screen saver.
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
my iphone just stopped connecting to my wifi and i have tried all the recommended troubleshooting with no success. Also when i send a text , it shows it coming from my email address instead of my cell #. i dont receive any text going to my cell #. help
If i understand what you are saying then you are seeing the WiFi indicator after connecting but Apps are saying that they are not connected to the internet?
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be to restart your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
I have forgotten my security question and I have tried for to days for uses to send me the resets and the email is not coming though?
If you've been unsuccessful resetting your security questions by signing into your account at appleid.apple.com (manage my apple I'd) and the going to password and security, and have also tried contacting iTunes support and have not heard back then:
Call 1-800-APL-CARE and have the following info ready:
Your verifiable and active apple I'd username, the serial number of a device registered in your name, and some billing info currently associated with your account. -
My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.
If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.
-
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?
Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
- com.apple.logic.pro.cs
- com.apple.logic.pro.LSSharedFileList.plist
- com.apple.logic.pro.LSSharedFileList.plist.lockfile
- com.apple.logic.pro.plist
- com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened. -
Ever since I have updated my software to iOS 7, I cannot download anything from the AppStore app and I have tried resetting my password and updating ITunes, but nothing works! Also when I try to sink my mini with my iTunes account it says you cannot sync because the sync session failed to start.
It sounds like to me you're trying to sync using the computer.
Try these things and see if it helps before you try your next syncing session. If none of the things below work then you might consider trying to sync using iCloud only.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
How do I get the remote to my apple tv to stop affecting my macbook?
How do I get the remote to my apple tv to stop affecting my MacBook Pro? Right now every time I hit play or up and down it affects the volume and the play mode on the MacBook.
https://discussions.apple.com/message/12317173#12317173
more hits
https://www.google.dk/search?client=opera&q=make+apple+tv+remote+not+control+mac book&sourceid=opera&ie=UTF-8&oe=UTF-8 -
So I was downloading albums for my phone on the macbook pro and I tried putting in the charger for my phone but i had it in reverse and when i tried putting it in it just completely turned off. When i connected it to the charger the light on the charger for the laptop would just flickr green and red lightly.
Maybe you are looking for
-
Multiple entries in ARD with same ip, but different ports?
I always learn so much from these forums...thanks to all of you who take the time to answer. I established 5900/3283 for my primary mac (mac 1) behind my router at home and then configured port forwarding to have a public port of 15900 mapped to the
-
Experts, We are using 9i RAC database(2 Nodes). Our Problem is Node1 is not getting too much connections, but node2 is getting too much connections. Difference between these two is around 400 example Node1 ---> 70 Node2 ---> 465 How i could solve thi
-
How to have Administration tool in English ?
Hello, I do have my windows installed in Portuguese. When I install the admin tool it comes out in Portuguese (menus, etc). I'd like to have it in English, since documentation, forum, etc are in english and we are used the words like 'join', etc... a
-
Help reqd for determining header char combination in Manual Planning
Hi, I have created a manual planning layout which has 3 chars in lead col, 5 KF in data col and all remaining chars in the header. Now when I display plan data for this layout at time it displays me records only for one combination of header chars. A
-
Limiting datasource replication only to 3.x format
Hi, Is there anyway to limit the choosing of the relication format option (3.x format or new datasource format) by authorization? I have raised an OSS but wanted to know if someone knows ways to do anything about it or not? Thanks