HT1551 No Apple TV menu

My Apple TV is connected to my Sony Bravia HD TV as directed via the HDMI cable. I have a receiver with surround sound hooked into my Sony TV. So far, I have tried all the troubleshooting tips, and I get no Apple TV remote menu. The Sony is on, and I've tried all input options. the Apple TV blinks once when I press the remote menu.  Ideas?

If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
from:
http://support.apple.com/kb/HT1551

Similar Messages

  • HT1551 netflix has disappeared from my apple tv menu under internet. How do I get it back to watch netflix

    netflix has disappeared from my apple tv menu so I can no longer select it under internet. all I have is youtube etc. How do I get it back?

    Try restoring the ATV in iTunes
    Apple TV (2nd generation): Restoring your Apple TV
    support.apple.com/kb/HT4367
    Apple TV (1st generation): How to perform a factory restore
    support.apple.com/kb/HT3199

  • Why can't I see my Apple TV menu on the HDTV screen?

    I just bought the Apple TV and, following the setup guide, connected it to my HDTV.  I have my IMAC in the same room and I am using a wireless network.  I thought that the Apple TV menu would appear on the TV screen, prompting me through a series of steps to hook up to the network.  It did not do anything.  I know the Apple remote is hooked up - the white light on the Apple TV flashes when I push most any button, but I can go no further.  What up?

    Do you have another TV you can try on or perhaps a friends? Is your TV HDCP compatible? Is it a newer model or have you had it for awhile?
    Otherwise take it in to see if it will work in the apple store, to determine if it's a device issue or a communication problem with your set.

  • Apple TV Menu dimmming in sub menus and user info screens

    Hey all. I have a problem with my apple tv (2nd gen) dimming when in a sub menu or entering usernames, passwords, etc. When I back out to the main menu the screen brightens. The screen is at normal level when watching videos etc.
    I believe it has nothing to do with my lcd since the screen is fine on the main apple tv menu.
    Any ideas? Is this a setting? I didn't see it in the settings menu.

    Welcome to the Apple Community.
    One of my tv's dims its screen when it is mostly black, but this is a function of the tv, could the same be so in your case.

  • Apple TV Menu missing TV Shows & Music options

    Just set up my new Apple TV which I'm using in conjunction with OSX 10.6.8 / iTunes 10.5, and the menu screen only shows the Movie, Internet, Computers & Settings options, no sign of TV Shows or Music. I have Home Sharing selected in iTunes and can stream music and video from both my Mac and iPhone, but can't seem to access my library from the Apple TV menu. Why? Thanks.

    Like DougMcLean, same thing happened to me. With every other version of iOS in my AppleTV 2, I had YouTube, Radio etc items in the menu. Now after updating to the latest version everything is gone except for Computers and Settings. FYI, I am in Malaysia where the AppleTV is not sold. I got mine in Oz.
    I tried Settings to see if this is simply a setup issue, but there is nothing that I can see that relates to this problem.
    I have not tried studiogalatea's solution. By pulling the plug, do you mean that I simply remove power?
    Still I wonder what Apple is doing? Even if I am not able to buy movies in Malaysia (I guess its because of IP rights and piracy) I don't see why Apple has to cripple the device and only allow me to share my computer's content and nothing else! This is quite ridiculous. I can view anything on YouTube, Internet Radio etc on my computer anyway, since these sites do not prevent anyone in the world from viewing. So has Apple become everyone's conscience?

  • Cannot get to Apple TV menu

    WWhen I turn on Apple TV, my television blinks "no signal". I have checked my connections and I am connected to my wireless signal. I've unplugged Apple TV and plugged in again.  Now the television screen goes "no signal" to Apple picture" to no signal, and keeps doing this. Yet I cannot get the Apple TV menu to show up. What do I try next?

    Sounds like it's run into a firmware problem.
    Restore via microUSB:
    Restoring your Apple TV - Apple Support

  • I can't scroll in apple tv menu

    I can't scroll in the internet section of the apple tv menu. also, the netflix option is missing...help! i need to watch breaking bad!!

    Try rebooting the device and router.

  • Apple (Finder) menu do not respond

    I make a search but could find anything related to this specific trouble.
    It has happen already few time (3) after download or update a soft (QT) Apple/Finder Menu does not respond anymore to function SLEEP, RESTART and SHUT DOWN.
    I have repair permission (no result), run ONYX 1.5.3 (no result), Disk Warrior 4.0 (no result), eDrive -TTP 4.1.2- (no result)...
    The Mac (almost) never stop or put in sleep to let utilities like Onyx and TTP check/repair automatically on night.
    Since I thought it should be a corrupted preference file, I moved on desktop com.apple.finder.plist, com.apple.systemuiserver.plist and restart.
    The two first time I did that, Finder was working again normally. But this time not !
    I also try disable Application Enhancer 2.0.2 for testing and also kill the finder from Activity Monitor (an advise), through away again com.apple.finder.plist and com.apple.systemuiserver.plist.
    At restart, still no response at menu Sleep, start etc...
    Any idea what could I try now to solve that ? It's so boring !

    Hi cldjr!
    Which of your Macs are you having a problem with? The iMac or the iBook?
    What size is the Hard Drive, and how much space is available?
    How much RAM is installed, and is it original or added?
    By all means, run Repair Permissions, as Dimaxum suggested, which should be run from Disk Utility, located in the Utilities folder, while booted from the Startup Volume, not from the system disc. Instructions posted below.
    In addition, if you are able to startup from the system disc, run Repair Disk. Instructions posted below.
    If neither of those corrects the problem, reinstalling the 10.3.9 Combo Update, may correct the problem.
    When completed, run Repair Permissions once again.
    TO REPAIR PERMISSIONS ON THE STARTUP DISK
    1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
    2.Click First Aid.
    3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
    Rerun RP until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x
    When "Repair Permissions" is complete. Quit "Disk Utility".
    THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
    1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
    2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
    3.Click the First Aid tab.
    4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5.Select your Mac OS X volume, if necessary.
    6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
    7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
    8.When finished, select Quit Disk Utility from the Installer menu.
    9.Select Quit Installer from the Installer menu.
    10.In the resulting pop-up window, choose restart.
    11.After the computer has restarted, you can eject the CD.
    ali b

  • Why is the slotomania can't be open from your Apple store menu? I had it before but stop working.

    Why is the slotomania can't be open from your Apple store menu? I had it before on my Ipad; but stop working.

    At the bottom of the App Store screen is purchased. Tap it, and see if you can install the app from there. Purchased keeps a record of all your apps, free or purchased.

  • Title Bar hidden behind Apple Mac menu bar

    Hi
    I am using Elements Organizer 12.1 and, for some reason, the title bar is hidden behind my Apple Mac menu bar.  Does anyone know how to click behind the menu bar so I can access the Elements title bar?
    Thanks
    Richard

    The first thing to try is to go to system preferences>displays and set your screen resolution down as far as it will go. You may need to try a few different settings, but eventually it may snap back into place and then you can go back to the correct setting for your display.

  • Hey. I have recently made an update on my daughters iMac, particularly update OS X 10.9.4, when finished, its still asking for update and the same update stills remarked in the apple update menu and at the App store app. Why doesn't stop asking f.ud?

    Hey. I have recently made an update on my daughters iMac, particularly the update OS X 10.9.4, when finished, its still asking for update and the same update stills remarked as ready in the apple update menu and remarked as 1 to go at the App store app. Why doesn't stop asking for update when its done like 5 times or more? Thanks for taking your time!

    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Why are the movie and television icons missing from my Apple TV menu?

    Why are the movie and television icons missing from my Apple TV menu?

    likely because it does not have a working connection to the internet
    check the settings and maybe reenter the wifi pasword

  • How do I remove the "Dock" option from the Apple Dropdown Menu

    I work for a school district where I am continuosly having to go back into Mac labs and reverting the settings on the dock back to normal.  Students are changing the size, position and content of the dock, as well as hiding the dock.  These computers are used by students k-6 and the younger children are getting confused when they com in and they cannot find the dock or its not where it is supposed to be.  I have been able to lock the sizing, position and content of the dock but am not finding a way to elimante the hiding of the dock.  Preferably I would like to remove the "dock option from the Apple dropdown menu.  Please help!!!!

    This question was asked quite a while ago and the suggestion was to use Server Admin Tools, which I know nothing about. You'll have to look into that. If these Macs are running off a server, then this might work for you. I'm seeing that Server Admin Tools from Apple is still current.
    https://discussions.apple.com/thread/287704?start=0&tstart=0

  • Apple TV Menu -

    Trying to use Apple TV with iTunes (hope i am in right community)...but when i go to WHAT SHOULD be my music in the MUSIC Category (orange icon) on the Apple TV menu, i don't see my stuff, all i get is 5 or 6 artists and no playlists and etc...
    BUT, if i go over to COMPUTER (green icon)...my music, photo's and everything is there...and it works perfect there, BUT IS THAT THE RIGHT WAY????
    Seems like if i want music, i should navigate to MUSIC....
    Any help or explanation is aprreciated.
    MacBook Pro 10.8.3, iTunes 11.0.3, Apple TV3 5.2.1, and all updates.
    Thanks

    McCaffertee wrote:
    MUSIC Category (orange icon) on the Apple TV menu, i don't see my stuff, all i get is 5 or 6 artists and no playlists and etc...
    BUT, if i go over to COMPUTER (green icon)...my music, photo's and everything is there...and it works perfect there, BUT IS THAT THE RIGHT WAY????
    MUSIC Category button is your music purchased from iTunes. I believe when you choose this, you're streaming directly from iTunes Store.
    and YES "if i go over to COMPUTER (green icon)...my music, photo's and everything is there...and it works perfect there, BUT IS THAT THE RIGHT WAY????"
    Yes it is.

  • Change/disable mouse-over selection on app switcher menu (apple-tab menu)

    Does anyone know of a way to disable the mouse-over selecting an application on the apple-tab menu (app switcher)? This is so frustrating when you are trying to do a lot of copy and paste between apps and the mouse keeps "re-selecting" the application you are trying to choose.

    Hello,
    Thank you so much for replying so quickly and moreover, solving my problem. I must apologise for not doing more research about this issue by searching these forums more thoroughly. I found a similar post here:-
    http://forums.adobe.com/message/139937#139937
    Your solution goes one step further and eliminates the need to search through the Javascript for the relevant code.
    Thank you again, you've helped me a great deal.
    Best wishes,
    foreverdusty.

Maybe you are looking for

  • Library is not going onto my iPod

    I burned a CD into my library and clicked update iPod to get the songs. The songs were not showing up on my iPod, so I tried a second time with another CD. Still wasn't working. I decided that actually installing the newest update might help so I did

  • After setting the reverse proxy, SSO doesn't work

    Hi, We are facing a problem after setting a reverse proxy. ITS&SSO is working fine for internal users but the problem is with the external users;ITS is working fine for external users but SSO is not working. Does anyone can help us out with this prob

  • Can I Keep Stage3D From Writing Into the Z-Buffer?

    I want to render concealed objects and achieve a similar effect as the one shown in the link in Stage3D. Silhouette Effect in Torchlight 2 I already know how to do this theoretically. I have to draw the object twice: Once with normal settings and onc

  • How to use RCIEV feature to trigger mail to a particular mail id in M0001

    Hi, I'm trying to trigger mail for any marital status change in personal data infotype for employee through dynamic action. Kindly help me in using RCIEV feature in M001 feature in detail for triggering mail to a manager other than administrator. Tha

  • Help needed to figure out a strange thing

    I am running GJ and Java 1.4 on window 2k and I have been spending hours trying to figure out what's wrong with the following codes. Any help would be greatly appreciated. The code is simplified (doesn't use any util class at all), but it still throw