HT1551 Screen goes black but sound continues when watching netflix on apple tv

Screen goes black intermittently when watching Netflix , sound remains. Broadband is strong , not sure what problem is

That will usually indicate a network issue. First try rebooting ATV and router.
Make sure DNS is set to automatic (settings - general - network). If on wifi try ethernet. Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise.

Similar Messages

  • IPad air2 suddenly freezes and the screen goes black, but sound continuesI have restored to factory setting and it was OK for a while yesterday it froze again. Anyone else got this problem

    IiPad air2 suddenly freezes, the screen goes black but the sound is still on, I have taken it back to factory settings and it was OK then yesterday it froze again, only plugging it into my IMac got it going again. Anyone else got this problem?

    Greetings jupiejupie,
    Welcome to the Apple Support Communities!
    I understand that your iPad is sporadically becoming unresponsive and the screen is turning black. In this situation, I would recommend reading over and working through the suggested steps in the attached article. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Joe

  • [Solved] GS60 - Windows 8 - Screen Goes Blank But Sound Continues

    Typically about 1-2 seconds after the windows signup screen, the screen goes blank but you can still hear beeps of the pc loading. Then, only sometimes, white lines flash horizontally across the screen.  My only choice at this point is to do a hard shutdown. The "MSI" logo pops up on reboot and process continues. Eventually (like after 5-10 mins. and several restarts/shutdowns from the windows login screen), the screen will work again. The screen will continue working for hours uninterrupted but may encounter the same issue. Then, it takes 5-10 mins to get the screen operational again!
    Bios is latest version .106

    Hey lbman14,
    Try updating your VBIOS if yours are not 80.04.EF.00.21, and use the latest graphics driver from MSI website first.
    VBIOS: http://dl.msi.com/download_files/frm_exe/N15E-GT_80.04.EF.00.21.zip
    Update Guide:http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf
    NV 332.38:http://download.msi.com/nb_drivers/vga/vga_nvidia_332.38_0x2bb10911_w818764.zip

  • HT201335 What causes the TV screen to freeze but sound continue on TV when using Air Play from I Phone?

    What causes TV screen to freeze but sound continue on TV when using Air Play from I Phone 4?

    First try rebooting ATV and router. Beyond that, it's probably something within the network, typically interference.
    To get a report of the network go to istumbler (Mac) or netstumbler (PC). Look for signal strength and noise.
    If on wifi try ethernet.

  • Hi, my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I

    Hi,
    my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I fix this?

    Emily..
    Could be the graphics card, run the Apple Hardware Test
    If the hardware test doesn't reveal any problems, use Lion Recovery.

  • When I turn on my iPhone 4S the apple logo pops up for a split second then the screen goes black but the phone itselfs boots up just fine???

    I tried replacing the screen with no luck. The same thing happened with the new screen. I replaced the backlight coil and the backlight ic and still have the issue. I don't know what else could be the problem. If the battery is completely dead and I plug it in the "charging battery" symbol shows just fine during the entire time it is charging, but as soon as it starts to boot up the apple logo shows for a split second then the screen goes black. The rest of the phone still boots up just fine. I can use SIRI, press the lock button like I'm about to use my phone and slide my thumb across where the "slide to unlock" would normally be and it will make the unlock noise just no picture display. I am pretty tech savvy when it comes to repairs and all of the connections look fine, replaced backlight coil and ic, replaced LCD/digitizer, tried a restore, tried a DFU restore, multiple hard resets, but I am at a loss as to where to go from here. I had dropped the phone and put a minor crack in the screen but the phone worked just fine for a couple months after before this started to happen. The phone is still under apple warranty but apple won't cover it because Apple is stating that it is "caused by the crack in the screen." But being a repair technician I know that is not the case... Good one apple. So I took it upon myself to try to determine the REAL problem. Anyone with a little more knowledge have any ideas? Any suggestions are appreciated!!

    Yes, I understand that. But The screen issue is not a result of user damage. The phone was not dropped when the screen got cracked. My daughter was standing in a chair at the table and dropped one of her toys onto the bottom of the phone and cracked it right by the home button. (Nowhere near the LCD/digitizer flex cables, connections, or logic board components) then a few months later my phone had died, I plugged it in, it showed it was charging, then Apple logo disappeared and screen didn't work. AFTER contacting Apple about the issue and them telling me that it "is a result of the very minimal crack to the sheet of glass that has no relation to the LCD or Digitizer and that the warranty does not cover it I had taken it upon myself to change the LCD/digitizer to no avail, as well as backlight ic and backlight coil to no avail. But how do I go about letting Apple know that it is in fact NOT due to the cracked screen nor is it due to the flex cable connections? I can't. So the lady that works the call center phones  trying to "convince" me that she knows what she is talking about and "convince" me that it is from the cracked screen I have to take her word because I can't show Apple that its not because of that without paying them $199 to fix the screen in which case they will just send me a new phone rather than fix the faulty hardware under warranty.

  • IPad Screen Goes Black, But Still SOUND?!?!

    Hello all, As my Title, it says The IPad Screen Goes black. But when i try to scribble around I heard a noise of unlocking it. Even i tryed Home button and Power button for 10 Sec. HHHHHELPPPPP
    Please Answer Quickly As Possible!

    Hi there Bradvance! What is your suburb? I will try to find the nearest possible Apple Store. And have you tryed resetting it by doing this?
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    You are required to connect to your computer. Thanks!

  • My ipod touch is flashing white on and off, I hold the buttons down, and the screen goes black- but the apple logo does not come on. What do I do?

    So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
    The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
    I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
    What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hp envy m6 screen goes black but computer is still running

    My grandson has a HP Envy M6 laptop, every so often the screen on his laptop goes black but the computer is still running.  If he is watching a DVD on the TV via hdmi cable the movie still plays on the tv but the screen on the laptop is still black.  Sometimes it will come back up, other times he has to turn it off and restart.  Please, somebody give me an answer because my grandson is in college and if I can't get this fixed, he is expecting Grandma to buy him a new laptop.

    Well, I went back and reread your links and realized that the second one was to update the bios.  Since I know that my grandson might not even know what the bios is much less how to update it or know that it needs to be updated. So I updated the bios and although I hesitate to say that fixed the problem since it has only been a couple of house, I haven't had the screen cut out on me since I did the update.

  • Zen screen goes black and locks up when attempting to dock to compu

    When attempting to dock my Zen to my computer, it first starts like it is attempting to dock and then the screen goes black and the player locks up. I have to reset it in order to get it to come back on. This happens when trying to dock with Zen Media Explorer and Media Monkey. I have tried it on another computer and it happens there too. Help!

    You are talking about a Creative Zen MP3 2/4/8/6/32 GB (flash) player?
    Then check if you have the latest firmware on your Zen?
    If you do have the latest firmware e.g. < Latest revision [.2.0] 28Feb08> then
    try this:
    Recovery Mode - If you experience one or more of the following symptoms, it is recommended that you boot the player into its unique Recovery Mode, and then clean up, format or reload the firmware.
    . The player is not detected in Creative MediaSource or Windows Media Player
    2. The battery does not last as expected
    3. Your computer stops responding during file transfers
    4. There is a power outage during file transfers
    5. There is an error about firmware
    6. LCD displays a "Firmware Problem" message
    7. Your player is not responding.
    8. The player is performing erratically <---------- - ?
    Just clean-up and reboot.

  • MBP has "Service Battery" then disappears. Also screen turns black once in awhile when watching videos.

    My MBP recently has the "Service Battery" notice, but disappears after I charged my laptop and hasn't returned yet. Also, my screen turns black once in awhile when I am watching videos, but cannot get it back lit so I have to restart it.
    Do I really need to "service my battery?" And what do I have to do in regards to my scrren turning black?

    Service Battery means replace battery as soon as possible.
    Occasional black screen problem may be related to the battery condition.
    You may have to take the computer to the Apple store to have it checked out.
    Power related issues can be  resolved often by resetting SMC.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • I dropped my iphone in toilet...screen is black but sound is working

    I dropped my iphone in the toilet a week ago and immediately put it into rice. The screen went black as soon as I dried it off but, it kept vibrating until it ran out of battery. I left in rice until this morning when I put it on charge, it turned on but the screen is still black, I called it and the sound works. Any suggestions?

    You can leave in in the dry rice for more weeks, however, once water gets in it is very difficult to remove and corrosion starts and continues.
    Realistically, there is little chance that your iPhone will recover to a reliable state.

  • Horizontal flickering, screen goes black -but apps still operational?

    I've gone through 10+ pages of postings in the iBook G4 display forum, and I can't find any problems that are exactly like mine...
    Yesterday, the screen suddenly started getting noisy horizontal lines and flickering. But the applications remained operational the whole time. I closed them out one by one, and eventually the screen went black. Even then, iTunes continued to play - but I had to reboot.
    Now it's happened several times since then. The time from flicker to black is shortening. Generally rebooting is no problem, but a couple of times it took about 15 min. before it would restart.
    It's also not continuous. Right now I've been on the computer for an hour without incident, but I feel like I'm pressing my luck.
    Currently I'm traveling in Thailand, heading to India next. There is an authorized service provider here in Chiang Mai, but I'd like to have an idea of what I might be looking at before I go in. I have about five days before I leave the country.
    I still have 1.5 years on my warranty, but being overseas and trying to get this repaired is going to suck...
    I'm freelancing while here, and this problem threatens my ability to work.
    Any ideas? Is this a display issue or something else?
    iBook G4 Mac OS X (10.4.6)
    iBook G4   Mac OS X (10.4.6)  

    I am having this same issue as well. The mac boots
    fine, then the screen flickers and sometimes goes
    grey. some times it comes up, sometimes it goes to a
    grey screen. Most of the time I get the flickering
    lines across the screen.
    Help would be awesome!!
    This morning I took the laptop to the authorized support center here in Chiang Mai, and within just a couple of hours they had an answer - a problem with the logic board. Good news - the replacement is covered by the warranty!
    So you should take yours in ASAP -

  • My i pad 2 screen is black but sound is working what is the solution?

    screen of my i pad 2 is black , i tried restart , then reset , then restoring , now there is sound but still the screen is black what is the solution ?

    There is no user interface at all? Not a single graphic or color, just a black screen?!

  • HT1657 I am unable to play movie, I touch play, the screen goes black but nothing happens???

    unable to get movie to start??

    I have more or less the same problem - except I've been able to get it to play (once or twice) by starting it with the miniplayer instead of the main screen (huh? exactly) -- but I paused the movie and now I can't get it to start again.
    Super annoying. Plus, it's interesting to me that the "help" page linked from the itunes store has no links to anything that might indicate that there might be a "problem"

Maybe you are looking for

  • Problem in searching the document

    Hi Experts, We've uploaded a ppt file into our KM repository. Similarly we've uploaded some other files (txt, doc, etc..) at the same location. But the problem here is, when we are searching the ppt document with search option the document (ppt) is n

  • Dynamically change shape characteristics java3d

    Hi I am working on a 3D application i am trying to draw some shapes on the 3d canvas an change color , size, with the use of some widgets. i implemented the listener on these widgets(sliders) and passed the value to the shape class but nothing happen

  • Jsp give me this error javax.servlet.ServletException: oracle.jdbc.driver.O

    Hi master Sir I use orace 9i easily in java class with following code =========== import java.sql.*; public class ttst { public ttst() { public static void main (String args []) try{ Class.forName("oracle.jdbc.driver.OracleDriver"); Connection conn =

  • Trying to download Flash

    Having just installed Window8, I can no longer see some videos. Was told to download Flash. Tried to but nothing happend! Any ideas?? Guess I must need to change some settings.

  • Cmod Scrn Greyed out

    hi gurus i have been trying to enhance a standard extractor in R3, but when i go to the cmod screen, and try to wrtie the Abap code the screen is greyed out. i cant type my code in. this is very weird. i have already tried turning off the "in perform