HT1551 time and date cant be set on apple tv

The date and time cant seem to be set.tried restart and unplugging. nothing seems to work.

I had the same problem. Luckily, switching from logging the AppleTV into my Linksys wireless router as 'guest' , and instead logging into it using the main password got me over the 'time and date' hurdle. Look around in these discussions, other folks have had to do various things to get this corrected. At this time, it does not appear that there is a 'one size fits all' solution.
Good luck

Similar Messages

Asha 201 Time and Date remains on set value - not ...

I use a Nokia Asha 201 as a backup handset, so it is not used very often. Recently when i needed to use and after i charged it (the charge had run down) i set the time and date to the current time and date. i noticed a few minutes later that the clock had not progressed, it was still showing the time i set and saved it to. upon setting the time again i noticed that it was also not dispalying the date and time on the hoem screen as it always did, with all the settings still the same. it only shows "-------------" on the home screen. up to now it still appears that the clock (time and date) does not progress but remains showing the values i set it to. when accessing some of the other apps, i receive a prompt to set the date and time. Restored it to factory default settings a few times and reinstalled updates/firmware as well, with no success. Any advice please?

I have the same problem!

Mac time and date screwed up!

hi , so my MacBook Pro died today and when i turned it on the time and date had been set back to Sunday December 31 2000... well obviously that is not the right date so i tried to change it by going to date and time preferences. It wont open!!! I have no idea how to change it back now! I cant access most websites including my most used... google. and it limits me on ALMOST EVERYTHING! Please help!

macbook procannot reset time and date

Macbook procannot reset time and date

I have macbook pro (2009). The time and date has been set to prior to 2008 and does not allow me to modify.

Back up all data.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Please triple-click anywhere in the line below on this page to select it:
sudo date 0109000014
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Try again to set the date.

I want to take my apple tv from my home in Canada and us it at the Cabin in the States, but can't seem to get it to set up in the states? It just keeps asking for time and date over and over.

We just bought apple tv for our home in Canada, we also want to use it at our Cabin in Montana. We have internet and can get netflix etc on the Macbook, but don't seem to be able to hook up the Apple TV, it just keeps asking for the Time and Date over and over. Anyone know what we are doing wrong?

Hi There,
Find this here:
https://discussions.apple.com/message/20125520#20125520
Problem lies with IOS 6.0
Restore back to IOS 5.1.1 and set the Location to US you will be ok.

TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.

My iphone 3gs has started showing the wrong time and date. All was fine until this afternoon when it changed. My apps have the right time and date. However the world clock is wrong. I have to turn off the automatic time setting to get the right time.

My iphone is showing the wrong time and date. All was well until sometime this afternoon when it changed... to Nov 5 (2 days prior to today), and about 9 hours and some minutes before the actual time. The world clock for my time zone shows the same wrong date and time. My calender shows the same wrong date and time. The phone can not find my time zone any more. The only fix I found was to turn off the automatic setting for time. What is happening? Ideas?

just sorted mine went to
settings-mail,contacts,calender-timezone support
then turned it off then on tapped time zone and typed london
this did sort mine

Can't get past the time and date intial set up screen can anyone please help?

We purchased Apple TV last night, hooked everything up according to the directions, until we get to the Setting Time and Date Screen, which Apple TV- for more than 12 hours now, has been trying to establish. We've set the time zone both manually and automatically, I have emailed and tweeted Apple Support but no help so far, this is my last plea before I return it.
Any help would be appreciated.
Thanks

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Set time and date not working

Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!

You need to set your location to where you are, not where you might like to be.

How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu. However on the test page for the fax the time and date are showing Jan-00-00 00:00AM. I do not know how to change the date and time. Please help. Thanks.
This question was solved.
View Solution.

Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

KDE: Setting time and date automatically

I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
Have you set ntp correctly?
Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
in short try this:
ntpq -p
If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

Setting PC Time and Date as a User, not administrator

Good Day,
I'm trying to set the system time and date as a user. Currently running a hardware time server keeping the clocks on the network at the same time. The time is requested from the time sync server at the start of a DAQ run. This is to ensure every computer recording data has the same start time. We are currently changing network permissions and need to make a user run the software. User privelidges don't allow us to change the system time. Is there a way to allow a User to change the system time, or is that left to the Administrator only?
This function is already implimented on the administrator account and works successfully. Any information would be most appreciated.
Thanks

P.C. was mentioned earlier so I will jump in and assume Windows....
If the system is (made) a member of a Window administrative domain then all this is already in the box, and should be part of a well managed system (I have managed it on a workgroup as well, see the articles below for details). It's one of the things I try to promote as we often have systems switched on for hundreds / thousands of hours and knowing when some guy accidently switched it all off is realy usefull It helps with problems / events that occur outside our control and assists tracking down problems and stops drift / skewing of data.
Check out the following articles for more information: -
Basic Operation of the Windows Time Service
http://support.microsoft.com/kb/q224799/
Registry entries for the W32 TimeService
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q223184
Windows 2000 cannot set the correct time when it connects to multiple NTP servers
http://support.microsoft.com/?id=837196
The time service is included on Windows XP as well. For NT4 there is / was a toolkit that allows operation from Microsoft.
Use the command NET TIME /? (on W2K and XP)
Either way you will come accross problems at the firewall if you want to get to an external time source. Unless you have on of those nifty little black boxes that pick up a radio signal from one of the available time sources.
I like Dennis Knutsons idea because you can't always get IT's attention, sometimes they need a little help, thanks again Dennis for another good tip.

I cant' download my app. Time and date are asked to check but ok

I get the message that it can not make a safe connection and asks me to check time and date but they ok

Is the time and date correct on the iPod? Check time zone too.
If yu have iOS 5, go to Settings>General>Time&Date and set it to Automatic.

Unable to set network time and date

My Applet TV2 is unable to set the network time and date making it so I cannot login to my itunes account so not Netflix or anything making it pointless. I have tried adjusting my router settings (although I've used the same router for over and year and this just started randomly) I have ensured Port's 123 are open, I've restored the ATV2 4 times and have reset my router. I've seen links showing how to use SSh to set the time but I'm unsure if that will work. Any help is appreciated as I'm at a loss at this point

Welcome to the Apple Community.
Of the things I've seen work for people in the community you seem to have done most of them, but did you try these.
Restart Apple TV by removing ALL the cables for a moment or two.
Ensure that the DNS address's used by the Apple TV and the router are the same and are the address recommended by your ISP.

Time and date showing wrong time when set on auto since 4.1 update

hi since i updated my 3gs to 4.1 my time and date have changed by about 1 and a half hours and afew days before. i can change it manually but i dont understand why this has happened. has this happened to anyone else?
can anyone help? or am i just best to wait till the next update?

Me too.
Second time I've been late to work in two weeks thanks to Apple ** programming!
First time when I upgraded to 4.1 and the alarms stopped working if they were set to go off every working day.
Then again today when the time unaccountably rolled back to be Sunday the 7th at 5am instead of WEdnesday 10th at 9am. Waiting for the day I'm out of contract on this rubbish so I can switch to a phone with a decent OS!
Message was edited by: twixPanther

HT1551 time and date cant be set on apple tv

Similar Messages

Maybe you are looking for