HT1551 upgraded to new software - now I only see settings & computers tab

upgraded to new software - now I only see settings & computers tab
I don`t see all the other icons.
Please help.
Charl

Check your Apple TV is connected to the internet and that your iTunes store location is set correctly.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

Similar Messages

Upgraded to new software, Now I have 39gig worth on my itunes, not 8gig

I deleted my old itunes software and quicktime and installed the new stuff. Now it is saying I have 39 gigs of music with the same amount of songs(1900). I actually only have 8 gigs of music. Anyway to fix this. I have a 30gig ipod. thanks
Wes

I need some help, this is getting frustrating.

HT4623 my iphone 4s does not install the new software. i can only see the apple logo and the loading-bar, which does not change at all. how can i fix that?

hi!
can somebody please help me?
i wanted to update my iphone 4s to ios6. no problems until the install/loading bar appeared on the iphone. that was 2 hours ago. nothing happened there is no progress being showed.
i also reset my iphone (home button + standby button). result: the apple logo and the bar appear, but still nothing happens...
thanks for helping!
kr,
clemulus

I took my phone to apple they replaced the speaker. That corrected the problem

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

HT201412 after upgrading to newer iOS version 6 only my iphone 4 got turned off.

hi ,
after upgrading to newer iOS version 6 only my iphone 4 got turned off. it could not turned.. contacted apple store they tried all the option .. solution was replace with other iphone4 by paying £119, Which is really not the new one, its refurbished one..

So what's your question?

HT1595 Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

I just had this issue. Go into settings and reset the Apple TV after the firmware update. (note just "reset settings" and NOT back to factory settings)

In between my new iPhone and a old one, I used a replacement iPhone. On the replacement phone there were two backups created. I have a new iPhone now, but only the 2 old backups from my replancement phone. How do I get a older backup on my new phone?

In between my new iPhone and a old one, I used a replacement iPhone. On the replacement phone there were two backups created. I have a new iPhone now, but only the 2 old backups from my replancement phone. How do I get a older backup on my new phone?

Not sure where you backup to.
ITunes keeps the latest backup only.
Icloud keeps the 3 last backup.

Old osx...how do i upgrade to new software?

Old osx...how do i upgrade to new software? I have a macbook and it won't let me update past 10.5

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

I just upgraded itunes. And now I cannot see my iPads or iPod in the left margin of itunes? But I can still see them in my Windows Explorer?

Hey there MattSK123,
Thank you for your question. It sounds like you are unable to see either of your devices in the sidebar of iTunes after a recent update. A number of issues could cause this type of behaviour, and would recommend starting with the troubleshooting from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If the issue is not resolved, I would next re install iTunes from either of the following articles depending on the version of Windows you have:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Or
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
Thank you for using Apple Support Communities.
Take care,
Sterling

I used to see my contacts' photos full screen when they called or when I called them now I only see a thumbnail when they calling and when I call them?

I used to see my contacts' photos full screen when they called or when I called them now I only see a thumbnail when they calling and when I call them?
iPhone 4s iOS 7.1

Hello User909807,
After having some close calls with fraudulent purchases on my own bank account, I know how scary it can be to know someone else other than you had your personal information, so it was nice to know my issuing bank was helping keep my identity safe. Having said that, it’s completely understandable why it’d be frustrating to discover you were unable to continue making purchases after confirming your identity via text, and I apologize if this caused any unintentional frustration.
While I’ll be sure to document your feedback regarding our partnership with Citibank, N.A., please know that they are the issuer of your My Best Buy credit card account. As such, I will be glad to share your concerns with our Citibank contacts so that they may contact you to discuss your account in further detail. Please know you should receive follow-up contact from them within the next 3-5 business days.
Respectfully,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

I can only see one parent tab from the 2 level Tabs

Hello,
I have some pages, lets say page A, B, C, D.
Now I have a standard tab-set for the pages A and B, its named S1 (and has tabs for the page A and B).
I have another tab-set for the pages C and D, this is named S2 (and has tabs for the page C and D).
Now I have a parent tab to select the standard tab-set S1, this is named P1.
And I have another parent tab to select tab-set S2, this is named P2.
I can now only see one parent tab (P1 or P2), but I cant change from P1 to P2. The standard tabs are working good to select between A and B (or C and D).
As a picture, I see my tabs like this:
_____________P1
A__B
or
_____________P2
C__D
but I want to have:
___________P2 P1
A__B
or
___________P2 P1
C__D
Can anyone help me?
Regards,
Mark

Hm, interesting. I found out that the parent tabsets work both ways:
1) You need to tell the parent tabset for which page it is current
2) you need to tell the page which parent tabset to use

I used to be able to open a second tab to get to another web site without closing the first one....now I can see the second tab but when I click on it nothing happens...

I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbARCD/3.13.1.18107
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Upgraded to new software version - now phone wont work

i use vista - i plugged my phone in today (whihc isnt jailbroken) - it asked to download the new software and install - when trying to install - it wanted the mobile device recovery drivers - i have tried everything sugguested - manually selecting the drivers from common files - also completely reinstalling itunes.
this is a business phone and is now unusable
please help

Hi miller5280
Can you please explain the steps you took to "activate" your phone again?
I am having this problem:
1) after upgrade to the new software, phone was stuck in recovery mode (usb-itunes picture). Not jailbroken either.
2) have done the "reset" i.e. off button & home button together
2) I reinstalled itunes many times
3) switch usb port many times
4) de-auth / re-auth many times as well as purchased / download free apps (however, unable to sync due to itunes not recognizing the phone)
5) BUT it still won't restore (error codes such as 13, 14 0r 1604)
Can you or any here help me?? Can't use the phone at all. Very frustrating.....
Tks

Updating iPhone 5 with new software, now saying connect to itunes but not showing in itunes?

Something happened while updating my iPhone 5 while downloading the new software. It now has the icons on the screen saying to connect to itunes but it isn't showing up in itunes? I know the USB cord/port isn't a problem because my computer makes noises when plugged in and unplugged from the usb port however it isn't showing up in iTunes or 'My Computer' - they don't show anything.Please help, I have no idea how this happened!
Bad feeling I may have to go into the Genius Bar
Any help would be appreciated,
Thanks in advance

Update:
I have been following instructions on the apple website.
Including:
How to restart the Apple Mobile Device Servie (AMDS)
http://support.apple.com/kb/TS1567
and
Removing and reinstalling iTunes, Quicktime and other software components
http://support.apple.com/kb/HT1923
Both did not work - phone is still not showing up in iTunes or 'My Computer' and it is still displaying the 'connect to itunes screen'
Again, thankful for any help and replies!

My phone hanged while downloading new software, now its half way and cant switch it off also, plz help

My phone hanged while downloading new software, please help, I cant even switch off

Hello Shreyas79,
The article linked below provides some useful troubleshooting steps that can help get your iPhone working again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

HT1551 upgraded to new software - now I only see settings & computers tab

Similar Messages

Maybe you are looking for