HT1553 how to format mac drive ?

Sir, Pls, tell me that how we can format mac drive & how can i trash lock items. Thanks

1. Use the Disk Utility in the /Applications/Utilities/ folder to erase it.
2. Select an item in the Finder, choose Get Info from the File menu, and unlock it.
(82772)

Similar Messages

How to format Windows drive with Mac OS format

Hello
I have a Windows 160gb internal drive that is formated in Fat32. I am unable to format this drive with Mac OS X 10.3.9 in order to install Tiger 10.4. When I attempt to format using the Mac OS extended (journaled), I receive an error (sorry I didn't write it down) partition error. If I use the Mac OS extended option I recieve an error that the drive can not be unmounted.
How can I format this 160gb drive with Mac OS format so that I may install Mac OS X 10.4
Thank you

Do the following:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

How to format external drive as NTFS?

I have a lot of files on my mac, and my external drive is formatted in FAT32. I can't put files larger the 4 GB on there. How can I format the drive as NTFS? All help appreciated!

Also note that even if you do use a Windows computer to format the drive as NTFS and then put it back in your Mac, you can't write to it without installing third party software. As installed, OS X can only read NTFS.
As Niel noted, Mac OS Extended is the best choice, as long as there's no reason for the drive to be accessible from a Windows computer. If it must be NTFS, then you have these choices for the Mac to enable write access.
A commercial product is Paragon NTFS for Mac.
There are now two versions of the open source NTFS-3G software for OS X. NTFS-3G is the free version, which only works with the 32 bit boot kernel. This version also requires installing MacFUSE. A separate component needed for the free NTFS-3G software.
Tuxera, which provides the funding for the free NTFS-3G has their own paid version. Tuxera NTFS for Mac. This version supports both 32 and 64 bit boot kernels. But NOT the newer 64 bit only kernel of some newer Macs. Tuxera's version eliminates the need for the separate MacFUSE installation, and is faster at accessing NTFS drives.
Edit: Checking Tuxera's site, it looks like they've fixed the issue with the newer Macs which will only boot 64 bit. The note they had on their site at one time about it not working seems to be gone.

How to format hard drive

I want to format my 2010 hard drive to new but don't know, how? Need help.

The following refers to Aperture but the instructions are applicable for formatting a Mac external hard drive: http://support.apple.com/kb/HT3509
Note that you will lose everything on your hard drive when you format it!
The following also has information that may help: http://www.geek.com/apple/geek-101-how-to-format-a-mac-hard-drive-1485995/

How to Format external drive previously formatted for NSLU2

Windows XP.
I've had two external hard drives connected to my NSLU2 for several years. Always worked properly. Nevery any problems accessing files from either drive. Now, I'd like to remove one external drive and no longer use it with the NSLU2 (Disk 1). I just want to use it as a "regular" external drive and connect it directly to my PC by USB. When I plug it into my PC, it is not visible in Windows Explorer. When I right click "My Computer" and select "Manage", I can see it in the "Disk Management" section, but there is no drive letter assigned to it. It has partitions. When I right click on any partition, the "Format" option is grayed out and cannot be selected. Also, the "Change Drive Letter..." option is grayed out and cannot be selected. How can I format this disk back to whatever it needs to be in order to use it as a regular external drive? NOTE: I do not need to keep any files on the drive. I've already transferred the files I need to another drive. Thanks!

Never mind. I figured it out. I downloaded a free utility for formatting large drives in FAT32. The utility ran a quick format in just a few seconds and then the drive became available in Windows Explorer where I can now perform a complete format or just use as-is.

How to format flash drive to be compatible with Mac and PC

Hey guys, I was stupid and formatted my 8G flash drive to a different format by accident. Not FAT32 which it was originally. It originally worked find with my Mac and PC. I can't get it back now. I went into Disk Utility and the only way I can format it back is to MS-DOS(FAT) and all the other Apple formats. When I erase it to MS-DOS(FAT) and plug it into my PC it comes up and wants to format it to a 200MB FAT32 patition?? How can I solve this? Thanks

Hi,
FAT32 (called MS-DOS in OSX Disk Utility) is the file system to use for compatibility with Mac and PC.
The "200MB partition" message you get also indicates that you changed the partition scheme on the flash drive to GPT (GUID Partition Table).
Use Disk Utility to verify this and if needed change the partition scheme back to MBR (Master Boot Record).
Regards
Stefan

How to format external drive for mac AND pc use

hi
i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

There are a couple of disadvantages with formatting a
disk as FAT32. Firstly, there is a limit on the file
size for FAT32. I think it like 2 GB so if you
capturing video the results will probably not fit
into this file limit. Secondly FAT32 will not be
bootable. I alway clone my system to a backup disk as
bootable. That way if anything goes wrong with my
system, I can just boot from my backup disk and fix
it.
The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
iFelix

How to format external drive to MAC OS Extended w/ MBR scheme?

Hello all,
I have a Maxtor 1TB drive that I would like to format to MAC OS Extended (Journaled) but also using a Master Boot Record partition map scheme.
Every time I try using the Disk Utility, I get a partition error. It will only let me partition using a GUID scheme, however the XBox360 that I also connect my drive to requires a MBR scheme.
I have another another Maxtor drive formatted in this manor, so I can't quite understand why I keep receiving this error!
Any help would be much appreciated. Thanks
Message was edited by: Gio_vanni

Not doable. AFAIK, your choices are APM, GPT, and MBR. Additionally, HFS+ isn't available for windoze's MBR; only MS-DOS or FAT-32.

How to format hard drive with mac air for use on mac and pc

I'm new to MAC and can't make much sence of what has been said to do in other questions. All I want to be able to do is use my 500gb My Passport hard drive on my MAC and other PC's. I have saved all the data that I want to keep on another hard drive so can re-format the hard drive if needed. I want to do all the set up on my MAC AIR.
Please help,
Cheers Hutch

Reading assignment:
http://en.wikipedia.org/wiki/ExFAT
Ciao.

How to format external drive for use against windows and mac

Hi.
Please bear with me, a possible MAC newbie here
I'm about to buy the 13" Mac Book Pro (after ditching the Lenovo X301 because of a super slow processor, slow FSB, slow intel graphics).
But I have a couple of questions before I buy this Mac Book Pro.
NOTE:
My main OS (stationary pc) is Windows, and will probably be so for a long time.
But I need a lightweight laptop while on the run, and could not actually find any other one than the Mac Book Pro that met my requirements.
I'm using Adobe Lightroom for indexing and managing images on my windows stationary computer and will also use Lightroom on my Mac Book Pro.
I'm to use an external HDD for this purpose and will need to be able to both write and read to/from that HDD from both MAC and Windows.
Export lightroom library to External HDD from Windows (thumbnails + keywords).
Import new images and edit keywords etc from mac book pro in lightroom.
Import changes into my windows library version after been edited from library in mac book pro.
What options do I have when it comes to formatting that HDD?
What will the PROS and CONS be for the different options?
Note (I'm not to switch to Aperture (my main computer is still Windows))
Regards

Hi.. and thanks for that answer... another related here:
I'm to buy this external drive:
http://www.lacie.com/no/products/product.htm?pid=11038
This page:
http://pc.wikia.com/wiki/FAT32
tells me that windows XP will only format FAT32 to max 32GB,
will my upcoming MAC book PRO be able to format that whole disk using FAT32?
Or do I have to use something else to format it with?
Regards

How to format FAT drive as MAC OS EXTENDED?

Hello,
Does anybody can help me to format a FAT drive as MAC OS EXTENDED? It is an external FW drive. I cannot find the way in the laptop.
Thanks!!

I've discovered one subtlety with Disk Utility that wasn't at all apparent until I smashed into it headlong. I have a number of machines that have been running Tiger Server since the day it came out, incrementally updating from 10.4 to 10.4.11 as each release came out- so I have a number of 10.4 install disks to support them. I have also been painstakingly backing them up weekly via SuperDooper to emergency firewire backup drives, so that when disasters would occur I could theoretically simply reboot from the external drive and keep going.
At some point, Apple changed both Disk Utility and the requirements for a bootable external disk, and apparently I didn't get the memo. The old Disk Utility present on the original 10.4 disks lacks the "Options" feature found on the current one under the Partion tab- which allows the user to select the partition table format. There are now three options: Master Boot Record (FAT/DOS), GUID Partition Table (used to support the Intel OS X machines), and Apple Partition Map for the PPC machines.
Regrettably, PowerPC machines running 10.4.11 apparently *will not boot* from disks reformatted from DOS/FAT as Mac OS X Extended with the old disk utility, as I found to my woe when I installed Security Update 2008-008 and all my Server machines stopped working. They appear on the list of bootable drives when booting in select mode, they appear in the list for selecting the boot disk in System Utility, they can be selected- but the machine will simply not boot from them. The old utility apparently used to leave the FAT/DOS Master Boot Record partition table in place when reformatting to Mac OS Extended. I discovered that it was necessary to use the new utility, and specifically go into the options and select "Apple Partition Table", if you intend to be able to boot from an external drive reformatted from FAT/DOS with 10.4.11-era machines. And it should be noted that the new disk utility *does not* do this table selection by default: you have to use the Options button under the Partition tab and set it appropriately yourself.
Consequently, I spent several days reformatting, repartitioning, changing partion table types, and recloning my backup drives so as to render them bootable once again under this apparently new scheme. So, as a word to the wary: if you have been maintaining bootable external drives since the early (perhaps pre-10.4.7) releases of Tiger, it would behoove you to take a few minutes to go make sure that they are actually *still bootable*- and correct this gotcha before you run into it in an hour of need.
The other bad news if that, if you have the original 10.4 Server disks, "Archive and Install" does not appear to be an option, and you only have a disk utility that can't produce a bootable external disk in any case when booting from them. So it can be a painful exposure.

How to format external drive as MS-DOS (FAT)

How do I format the external drive as MS-DOS (FAT)?
I followed the instructions and have Disk Utility open for the external drive. Then > Erase > changed format from Mac OS to ExFAT and did the same with the RAID tab. But this does not change the Format from Mac OS Extended (Journaled).
Thanks in advance for any advice..........It's never easy is it?

biddymon wrote:
Snip snip...........and I appreciate your sense of humor. Unfortunately mine is in the sleep mode at this stage of the game.
(3) Boot Camp 4. downloaded to 16-GB flash drive, which is recognized in Windows but will not install due to following prompt: "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x-64 (64-bit) version of this program, and then contact the software publisher." This flash drive is formatted as MS-DOS (FAT), although ExFAT was an alternative.
OK, that does not suggest a disk format problem, but it does suggest that (as it says) you have the wrong Boot Camp version, or the wrong Windows version. ie, you have a 32bit version of Windows installed and you may have a 64bit version of Boot Camp on your Flashdrive.
I'll be back shortly, I'll get links for the various versions of Boot Camp, if there is no 32bit version for your Mac a reinstall of Windows is indicated, the 64bit version though.
OK
Even better, here is a link to a page with all the versions, if you click the version name a description will be displayed, find the correct one for your Mac and version of Windows.
Finally this page contains a model by model breakdown of which version of Windows will run on which model of Mac.

How to format external drive in MS/DOS

Hello. I have formatted my external drives in the past using MS/DOS. Today, Disk Utility does not have this option! I only have two Mac OS options and the Unix file system option.
What gives?
What is the Unix file system? Do I have to use this one now?

Hello. I have formatted my external drives in the
past using MS/DOS. Today, Disk Utility does not have
this option! I only have two Mac OS options and the
Unix file system option.
What gives?
Is this a new drive?
How big is the external drive?
iFelix

Hi, how I format the drive and install a fresh copy of Lion?

Hi, I have a Lion installed on a Mackbook Pro 2011, I had Leopard, then Snow Leopard and then Lion, but with so many instalations without formating the system is not working well, I am using an iMac at work with a clean install and is much more stable.
How can I format the hard drive and install a fresh copy of Lion???

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

HT1338 how to format hard drive

How do you reformat your hard drive back to original set up?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

HT1553 how to format mac drive ?

Similar Messages

Maybe you are looking for