HT1583 After the Burn, I tried to play the DVD on my iMac, but will not recognized the DVD.  It worked on my DVD player connected to my TV.  First time it happened. ok.

After  completing the Burn process, I tried to play the same DVD to the same computer, but did not recognized the DVD media.  It worked ok on the DVD player connected to my TV.  I've been burning DVD for a quite a awhile, this is the first time it happened.

Hi
This usually depends on
• BURN SPEED - not set down to x2 or max x4 - BEST IS N OT BEST - it gives max burn errors = BAD DVD
• Brand of DVD used - MeMorex, NoName etc are known problem makers - I only use Verbatim
• Type of DVD used - DVD+/-RW and DVD+R and DL-DVDs - can give a variety of problems - I only use SL-DVD-R
• Low free space on the Start-Up (Macintosh HD) Hard Disk - also gives bad result
- interlaced SD-Material (as on old CRT-TV (tube)) - I never go less than 25Gb
- HD-material - then 4 - 5 times more seems to be a good safe minimum.
Yours Bengt W

Similar Messages

  • HT4137 I have two iPad's that use the same iTunes/store account. I want the two devices to play games with with other, but it recognizes them as the same. I have set up two different iCloud accounts, but still not recognizing the users as different. What

    Hello, I have no idea if my question went out, so I'll post it again. I have two iPads (one 3rd gen and one 4th) that use the same iTunes/store account. I want the two devices to game with each other, but the apps recognize them as the same. I have created two different iCloud accounts in an attempt to differentiate between the two, but no luck. How can I continue to use the same iTunes/store account for music and movies, but also have the two devices recognize each other for games?

    You can share your iTunes ID and still have separate iCloud accounts with separate IDs, they don't have to be the same.  If you kids don't already have an iCloud account, have them set up separate accounts on their devices using separate IDs.  If they are already sharing your account, migrate their devices to separate accounts.  To do this, start by saving any photo stream photos they wish to keep to ther camera roll (unless already there) by opening your my photo stream album, tapping Select, tap the photos, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll.  If they are syncing notes with iCloud, you'll need to open each of your notes and email them to them so you can later copy and paste the text into new notes created in their new account.  Then go to Settings>iCloud, tap Delete Account (which only deletes it from thier device and won't effect your device), choose Keep on My iDevice and provide the password to turn off Find My iPhone (if using iOS 7).  Then sign back in with a different Apple ID to create their new account and choose Merge to upload the data.  Once everyone is on a separate account you can go to icloud.com from your computer, sign into each account separately and delete your data from their account.

  • Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s. I have tried deleting and re-downloading to the phones.

    Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s  phones. I have tried deleting and re-downloading my music library to the phones, but the result is always the same.

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • HT4009 I am trying to make an in-app purchase, and it will not let the transaction go through after I click "buy." How do I fix this?

    I am trying to make an in-app purchase, and it will not let the trasaction go through after I click "buy." How do I fix this?

    By 'not letting the transaction go through' you mean ...  ?
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    New to the Apple and I want to set up a user account that will not delete the guest users files and allow and preserve their personal settings after log out. Is this possible?

    The built-in guest user account will not do this. Simply create a new standard account and call it "Guest" or "Guest Users" or whatever you like.
    Go to System Preferences > Users& Groups, click "+" to make a new account.

  • My iphone will not recognize any usb cables. I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced.

    I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced. Any suggestions would be fantastic

    test if it charges with an ac charger
    test if it's detected by another computer
    if it's no to both then likely the connector is broken
    if it's yes to both thne it's likely your computers itunes install which is the problem

  • My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    Was a Restore one of the things tried.?  [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]

  • Just got comcast triple play.  Original ipad sees network but will not connect.

    Just got comcast triple play.  Original ipad sees network but will not connect.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an antennae?

    I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it.  The card is recognized but will not see the in-house network.  This is a pre-intel computer.  Do I need an additional antennae?   If so, which one because my research is confusing me about what is supposed to work with this computer.

    Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

  • My outlook will not open yet all other microsoft packages will.  When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

    My outlook will not open yet all other microsoft packages will.  When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

    You're very welcome!
    I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
    When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive).

  • I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open.

    I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open. This is very annoying.

    If this is an external USB drive, you must understand that USB is really, really slow. There may be nothing wrong except for that.
    In my opinion, USB external drives are only acceptable for backups, and to get "near Hard Drive" performance, you need FireWire.

  • I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard.  Quicken 2006 on my new laptop runs, but will not recognize the old data qif files.  What version of quicken for mac will recognize files from 2000?

    I have quicken 2000 for mac on an old mac and wish to upgrade to a new laptop running snow leopard.  Quicken 2006 on my new laptop runs, but will not recognize the old data qif files.  What version of quicken for mac will recognize files from 2000?  Or, is there a special procedure I should be following?

    can't open Quicken 2000 files in classic mode on new MacBook Pro version 10.6.7

  • My wife's iTunes ID will no longer work.  Tried to reset password but did not get email, tried to reset by answering personal questions' but will not accept the correct date of birth.  Has it been hacked?  How can I fix this?

    My wife's iTunes used ID will not work.  Tried resetting the password, but email was not received.  Tried using personal questions method, but would not accept the correct date of birth, so could not go any further.  Has her iTunes ID been hacked?  How can I fix this?

    Thanks for that advice @randers4.
    I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
    So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
    Problem solved!
    Message was edited by: NotBaconBits

  • I burned an edited movie to disc using H.264 codec and a second movie to MPEG -4 Video both worked well on my iMac but will not play on my Sony DVD Recorder/Player which accepts both DVD RW and DVD-RW.  Any suggestions?

    I burned an edited movie to disc using H.264 codec and a second movie using MPEG-4 Video.  Both played well on my iMac but would not play on my Sony DVD Recorder/Player which accepts both DVD+RW and DVD-RW discs.  I have tried other 'codecs' DV-PAL; DVCPRO-PAL; DVCPRO50-PAL; AIC; and finally share to iDVD.  iDVD works on both my iMac and DVD Recorder but the picture is very poor with major shimmering which is unwatchable.  Can anyone assist? The other codecs I used either do not pay on my video recorder or fail when I play them back on my iMac.  I am at a loss as to what I can do.  I am from the UK so using PAL is essential.

    If the source video is interlaced, you may have problems using iMovie. It de-interlaces everything on output which can cause picture to look strange.  Final Cut Pro X supports interlaced video, but it costs a lot more.
    Standard DVD Players don't support H.264 or MPEG4.  You might want to look at this article on transferring HD video to DVD.  I wrote this article mainly for Final Cut Pro, but many of the same principles apply.  

  • TS1702 The app "Dictionary+" was not installed on the iPhone "iPhone John" because an Unknown error occurred (0xE800002D). I will not download the updates to the laptop to have apps that work stored there. How do I reinstall iOS 5.1.1??

    I do not update apps through my laptop I store the apps that actually have been tested and work on the laptop and test updated apps on the iPhone. After updating the iPhone to iOS 6.0.1 iTunes will not install the apps from iTunes on my laptop to my iPhone without updating the apps online. This is not going to happen from my end and I do not like having control of what MY Laptop and MY iPhone can do seperately forced to be as one. That should be an option of choice not a demand of service.
    If anyone has an option like how to reinstall iOS 5.1.1 back onto my 3GS I would love to hear it.
    Thanks for any constructive solutions or directions other than here to turn.
    I've spent over thirty thousand dollars since 1992 on Macintosh products and I'm on the verge of becoming a Windows OS user based upon this latest Apple tactics of fair use.
    iPhone 3GS, iOS 6.0.1
    MacBook 10.5.8 - eMac 10.2.8, Mac OS X (10.5.8), MBk 2.4 Intel CorDuo 4GB Mem - eMac 800 Mhz IBM 2GB Mem
    One other thing I'm not updating the OS on the laptop; I like the freedom to do as I please with my computer.

    Unkle Rayne wrote:
    I'm running iTunes 10.6.3.
    Macintosh has never allowed the user to update and or utilize any app or feature if the Operating System was inadequate to do so. Your answer "iOS 6 requires 10.6.8 to run iTunes 10.7" is ineffective at this point and mute. The update should not have been aloud over Wifi or 3G Network to iPhone without the ability to authenticate resources required or needed to operate both iPhnoe iOS and Desktop OS together.
    The issue, as has already been explained is that the version of iTunes on the computer will not work with iOS6.
    iOS updates via Wi-Fi have nothing to do with iTunes on the computer and does not care what version is on the computer.  Personally, I find it completely moronic to update via Wi-Fi as there is really no option for backup or a restore from backup if the update fails.  To me, it seems like a great way for the user to create issues for themselves that do not need to exist.
    As there is no officially supported method to downgrade the iOS, the only option left if syncing is desired is to upgrade iTunes on the computer.
    I really do not understand why you seem so defensive about updating iTunes.  Update iTunes on the computer, then sync the device, if that's what you want.
    If that's not what you want, other options include updating apps directly on the device via Wi-Fi or 3G or living with it as is.

Maybe you are looking for

  • Error in Rush Order type with BOM item!!

    Hello, I am facing a very strange error while creating a rush Order with BOM item. System Error: 1. No item category available (Table T184 SO ERLA TAQ). I except the error. I get next error as 2. Structure explosion for item 000010 is not possible. A

  • External display pilxilated

    I am editing DV (24 frames) on FCP6 and using an external display (Samsung syncmaster 2043 BWX), connected digital, for the full screen viewing. If I watch an exported segment in QT, there is no pixilation, but while working in FCP there is pretty se

  • Unable to connecto to hyper-v machine

    i have a windows server 2008 with hyper v installed on it. I have 3 virtual machines running on it, and i am unable to connect to one of them from hyper-v mmc. clicking on the machine will result in a blank screen, then a message that a connection ti

  • DPS App Builder - "custom-icon-disabled-png" not found

    Hi, just tried to upgrade one of our Amazon/Android Apps to v26.  After pressing "Create App" (but in German), I go this pesky little error message After re-assigning all icon images still the same error message. Anybody who can shed some light on th

  • 64 or 32 bit

    About to install Windows 7 Professional on my iMac via BootCamp. Upgrading from Vista. Comes with both 32 and 64 bit versions. Not sure which one I should be using.