HT1583 I'm trying to burn a Magic DVD in iDVD and I get a message stating "not enough free disc space for encoding the remaining assets. How do I resolve this?
I'm trying to burn a Magic DVD in iDVD and I keep getting a message stating that there is not enough free disc space for encoding the remaining assets. How do I resolve this?
It means your hard drive is too full to accomodate the project and its many swap files etc.
You need to move some files (not applications) to your external hard drive, and keep at least 25-30GB free.
Similar Messages
-
Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets. My main hard drive only has a few hundred Mb left on it so i bought a 1 Tb external hard drive and want to know how to make iDVD use the space on the external hard drive instead trying to use the main hard drive. Any help would be awesome! thanks
Hi
Yes - This is important.
Free Space - Must be on the Start-Up (Mac OS) hard disk and can not be used on any other.
My safe level is a minimum of 25Gb free space - to let iDVD and Mac OS run OK.
This is due to that Mac OS X is in reality UNIX and there by needs lot's of temporary space for temp. files and so does the application iDVD. And this can not be addressed elsewhere.
So to free up space - one thing is to move iMovie Events to an external hard disk BUT THIS MUST BE DONE Right Else all can be lost ! !
• Never move or adjust any folders Named - iMovie Events or iMovie Projects - on Desktop/Finder - links will breake and can be hard to impossibly to heal. ALL movings must be done within iMovie Application (it goes for iMovie'08 to 11)
• External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will NOT WORK FOR VIDEO - nearly everything else BUT NOT VIDEO.
Yours Bengt W -
i have a burning preraration error that says not enough free space for encoding the remaining assets. Is this error on my iDVD coming up because i dont not have enough space on my macbook?
thank you
-
Problem burning dvd, message not enough free disk space for encoding remaining assets
I have never had a issue with burning dvd's before now I am getting an error message
How much hard drive space do you have remaining? How much data are you trying to burn (i.e. are you sure the capacity of the disc is high enough?)
-
HT2936 burning preparation error: not enough free disk for encoding the remaining assets
Im ready to burn my movie to a dvd and this message appears, "Burning preparation error: Not enough free disk space for encoding the remaining assets." What does that mean or what do i have to do?
Hi
The free space on Your Start-Up (Mac OS) Hard Disk (often named Macintosh HD) is near to full and iDVD and Mac OS needs lot's of space for their temp files. This can not be addressed to other devices - at all. It must be here.
I never let it go less than 25GB free space.
To free up space You need to
• trash files You NEVER need any more
• copy needed material to an external hard disk
(If from iMovie - THEN DO NOT - move or alter any folder named
- iMovie Event's - or -
- iMovie Project's
on DeskTop/Finder ! )
ONLY - within iMovie Application
ONLY to an external Hard Disk formatted as - Mac OS Extended (hfs) (mine are journaled) and I use FireWire ones as USB/USB2 performs badly - especially when filling up and if HD-Material is used.
UNIX/DOS/FAT32/Mac OS Exchange - works for most other things BUT NOT FOR VIDEO
How Much free space do You have ?
Yours Bengt W -
When attempting to burn a 1.2 GB video using iDVD I get a "Burning Preparation Error.. Not enough free disk space for encoding the remaing assetts" This has only justed started to happen. I have used this programme many times before in the past. Can any one help as I have tried all I know?
Yes, 44GB is sufficient. I don't think space is the problem. I don't know about iMovie but iDVD can only use the boot drive for its scratch disk.
You might be getting that error due to some damage file in the project.
Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - launch IDVD and try again.
Also run Disk Utility and verify the disk. If errors are indicated you will need to boot iknto your system install disk and repair the disk with Disk Utility (see the Utilities menu in the first window after the language selection window). -
Burned iMovie on DVD R DL (8.5GB) get error message trying to play in DVD player, but works in the laptops any help would be appreciated. Doing this for my sons graduation. Thank you for your time.
You would need to have burned the disc using iDVD or a third-party application such as Toast. Is that what you did?
-
I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?
If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there. -
Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanksi tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next -
I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?
Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy -
My Ipod disabled when i'm trying to restore that, its showing as "an error is occurred can't restore the ipod". How can i resolve this problem
Are you sure that that was the complete wording of the error message? Usually an error number or other information is also included.
Naren S wrote:
ya... -
When trying to backup on iCloud I get a message of "not enough storage" eventhough I have 5GB free. What should I do?
The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well. Tap Show All Apps to get the complete list of apps and MB used for backup storage.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847` -
Not Enough Free Disk Space to Burn - - Please HELP!!!
Hello -
I'm having a lot of trouble creating my iMovie and DVD. After several days of trying to delete applications and files off of my hard drive, I apparently still do not have enough free disk space to burn the DVD. This is very frustrating for me as I've created several movies/DVDs in the past and haven't had this much trouble. (I have deleted the old movies for more space.)
I have used Monolingual to delete unnecessary language files, and have deleted the iDVD plist as was suggested in other threads, however I still do not have enough free space.
Any additional suggestions would be VERY much appreciated! I tried to copy the iDVD file to my iDisk thinking maybe it would burn from there since I have almost 10GB available there, but again there wasn't enough space.
Thank you so much for your help!Lindsay,
One of the problem with the Powerbook G4s is that most of them tend to have small - in today's term - hard drives. I have a couple of external Firewire drives from Iomega that I use with my Powerbook to fee as much free space on the internal hard drive as I can. You will have to do the same.
iDVD probably won't be able to use a project file on your iDisk. -
iTunes has tried to update itself and runs into an error and tells me to manually install. When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
"A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
Anyone know what is creating this error message? Thanks for the help...(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I can't update my IPAD2 to IOS6. I've tried through ITUNEs. I get a message after IOS6 is downloaded and extracted, to the effect of "could not backup the IPAD2 because the backup could not be saved to this computer." I've tried directly from the IPAD, and by connecting through ITUNES to two separate computgers. Can anyone help? Thank you.
However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)
Maybe you are looking for
-
Need help on downloading apps that are more than 20MB in size
I can only download apps less than 20MB in size. If i want to download others that are larger than 20MB, i have to use wifi... But after I connected my phone to my home network and clicked on the app, I am still unable to download it... The only mess
-
Convert MIDI numbers to note names?
is there a built-in way to get the note name for the corresponding MIDI number and vice versa? 60 ----> "C4" if so, there would have to be a way to deal with enharmonics, like a preference for "sharp" note names. internally there must be something of
-
Issu in selection screen tabstip
Dear all, i have issue in selection screen tab control, i have 3 tab on screen when i execute the report using 3 tab and come back on selection screen then cursor default move on first tab, i want to stop control on my current tab. thanks in advance
-
Jsp files: how can i run it on web logic server 6.1?
I have installed web logic server 6.1 on my machine but i have some trouble to run jsp files on it cause if i have a .jsp file in the root directory(where is placed index.html default home page) and try to call the .jsp
-
I want to import ( or export ) my AOL contact list into My MAC mail list of contacts. I also want to bring along all information that I have saved in my different fields such a phone numbers, address's, and etc. So essentially I need to be able t