HT1583 sound stops part way through on burned idvd, but ok on computer edit.

Can anyone help, for the first time having a problem with a burned idvd which the sound stops part way through. If sound turned right up on TV muffled sound
is there. Edited on computer and all works fine with full sound right the way through, only trouble is on the disc. Have tried many discs, so does not appear to
be disc failure.
Appreciate any comments please

Hi
FIRST OF ALL - THE MAJOR ADVICE in this forum EVER !
In iDVD - Before Burning the DVD DO !
Save as a DiskImage
Double click on this .img icon
test the new Pseudo DVD (looks like a white hard disk) with DVD-tool
THEN
• DVD Brand - matters
• DVD type used - matters
• BURN SPEED - matters
• Audio file format - matters
WHAT did You use
I only use
- Verbatim
- DVD-R SL
- x2 max x4 - Best / High - IS NOT BEST
- .aiff - NO .mp3, .wma etc alient formats - from iTune EXPORTED OUT as .aiff ONLY
Yours Bengt W

Similar Messages

  • Swf stops part way through in browser

    my swf stops part way through when in the browser always at
    the same frame...in flash it plays fine...here's a link to the web
    page...
    http://www.karlyoder.com/wiredchemi...r_symmetry.html
    and here's a link to the fla (it was too big to attach)...
    http://www.karlyoder.com/wiredchemi...r_symmetry3.fla
    also, when right-clicked it says movie not loaded...

    Hi,
    Try following the steps below and check if that may help:
    - Open the HP software by clicking the HP Envy 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
    - Click the Network tab.
    - Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
    - Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
    *Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
    - Click the HP Envy 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
    - Type the manually configured IP address, click on Save and confirm.
    - Open the control panel and go to Devices and Printers.
    - Right click the HP Envy 5530 icon and select Printer Properties.
    - Open the Ports tab.
    - Click the Add Port button, select Standard TCP/IP and click on New Port.
    - Follow the steps by typing the manually configured IP address and confirm the changes.
    Now try printing and check if the issue been resolved.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

    Thomas A Reed wrote:
    You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
    FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
    Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
    Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
    This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

  • When i watch something on you tube or any video, it stops part way through

    when i watch something on you tube or any video, it stops part way through the screening and i cannot get it to continue. it is so frustrating!

    Go to this link to download the installer and this link to determine which version you have installed. Always get extensions like this from the publisher (in this case Adobe) and not from some website that says you need an extension and offers to install it for you since you may end up with malware instead.
    BTW, once the current version of Flash is installed, you can set its preferences to update automatically in the background.

  • Captivate 8 - Animated text stops part way through play

    I have created a presentation with CAP8 and am finding the animated text does not play out in full, but stops part way through.
    eg. animation to type [email protected] and then on a new line same text box [email protected]
    slide preview it runs perfectly. In the preview next five slides and in publication it runs  all of [email protected] and then freezes after typing johnbe
    It actually stops the video it seems, as i can hit play to resume, which will then type out the rr, and will complete the email on a third time hitting play.
    I get the same thing on the next slide with two of the three text animations that are running simultaneously, and again on the next slide. I want to point out that this is not just on one slide.
    I have changed settings on the properties from " rest of slide" to "Duration of animation", and there is no change. I have lengthened the slide timing just in case that makes a difference, even though I am using Shape buttons to progress to the next slide. No change.
    Any suggestions please?
    Thank you
    Claire

    Yes here are a couple of screen shots. I am sorry it doesnt show an exact time but with simulation it is at about the 2.5 second mark for the first stop
    first error screen
    second scrren with the error

  • I down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    i down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    Unless it has recently changed you can only watch rentals on the device or mac you rent them on.

  • I am unable to update my iPhone from ios4 to ios7, I know you have to do this via the computer however the backing up process stops part way through and it is unable to carry on

    I have ios4 on my iPhone 4 and I have tried to update it to ios7 and to do this I know you have do use the computer. however part of the way through, the back up process stops and nothing else happens

    I would suggest that you tru and update through iTunes on your computer. Also, could you connect your computer up to the internet using a wired connection rather than wireless - this will be faster and more reliable, particularly when you need to download a large file.
    Then try your update. This time, in iTunes, why not try to get it to download the sofware first (Download Only). You can then appy it to your iPhone later, once it has downloaded.

  • Iphone sound is on, but when typing sound stops half way through.

    What is wrong with my iphone, my sound is on, but i will be typing and  stops playing the sound half way through ?
    I have only had in 2 months 4s.
    help me please this is m second since my first got stolen

    Sound is on.
    Plays in headphones
    Wont play music out loud or anything other type of sound

  • Hi, I am prompted to download the latest  Tunes software (10.7) but after starting the process is stopped and the massage says "Errors occured while installing, if the problem persists choose Tools download only) This process also stops part way through

    Hi, I am prompted to download the latest I Tunes software (10.7) (I have done this sucessfully for other versions many times before)
    The process starts but stops quite quickly.A message pops up "Errors have occured while installing updates, if the problem persists choose Tools>Download Only and install manually" When I try this it still fails but another message pops up "Invalid signature, the download has been removed"
    Not very sharp on computers so any help would be appreciated.
    Regards

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • Audio disappears part way through avi file

    I have imported an avi file into a new CC project.
    Video stream:
    Codec: DV Video (dvsd)
    Resolution: 720x576
    Frame Rate: 25
    Decoded format: Planar 4:2:0 YUV
    Audio Stream
    Codec: PCM S16 LE (araw)
    Channels: Stereo
    Sample rate: 48000 Hz
    Bits per sample: 16
    PC is running Windows 8.1 and is running CC 7.2.2 (33)
    The file itself runs for 43 minutes and is 5.4 Gb in size
    When editing the file 25 minutes in the audio disappears completely and is gone for the rest of the clip.
    I have checked the file in VLC and the audio is present throughout the file.
    I used Avidemux 2.6 to split off from the main file about 10 minutes of data where there was no audio within Premiere.
    I imported that new file into Premiere and the audio is present in the new file.
    I can therefore use that but don't know what is wrong with the original file.
    The list of codecs installed on my PC are:
    Video:
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.3.9600.16384
    ICM
    Cinepak Codec by Radius
    cvid
    iccvid.dll
    1.10.0.12
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Toshiba YUV Codec
    Y411
    tsbyuv.dll
    6.3.9600.16384
    ICM
    Microsoft YUV
    UYVY
    msyuv.dll
    6.3.9600.16384
    ICM
    Intel IYUV codec
    IYUV
    iyuv_32.dll
    6.3.9600.16384
    ICM
    Microsoft RLE
    MRLE
    msrle32.dll
    6.3.9600.16384
    ICM
    Microsoft Video 1
    MSVC
    msvidc32.dll
    6.3.9600.16384
    DMO
    Mpeg4s Decoder DMO
    mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
    mp4sdecd.dll
    6.3.9600.16384
    DMO
    WMV Screen decoder DMO
    MSS1, MSS2
    wmvsdecd.dll
    6.3.9600.16384
    DMO
    WMVideo Decoder DMO
    WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2, VC1S
    wmvdecod.dll
    6.3.9600.17031
    Type
    Name
    Format
    Binary
    Version
    ACM
    Microsoft GSM 6.10 Audio CODEC
    0031
    msgsm32.acm
    6.3.9600.16384
    ACM
    Microsoft CCITT G.711 A-Law and u-Law CODEC
    0007
    msg711.acm
    6.3.9600.16384
    ACM
    Fraunhofer IIS MPEG Layer-3 Codec (decode only)
    0055
    l3codeca.acm
    1.9.0.401
    ACM
    Microsoft IMA ADPCM CODEC
    0011
    imaadp32.acm
    6.3.9600.16384
    ACM
    Microsoft ADPCM CODEC
    0002
    msadp32.acm
    6.3.9600.16384
    ACM
    Microsoft PCM Converter
    0001
    DMO
    WMAudio Decoder DMO
    0160, 0161, 0162, 0163
    WMADMOD.DLL
    6.3.9600.16384
    DMO
    WMAPro over S/PDIF DMO
    0162
    WMADMOD.DLL
    6.3.9600.16384
    DMO
    WMSpeech Decoder DMO
    000A, 000B
    WMSPDMOD.DLL
    6.3.9600.16384
    DMO
    MP3 Decoder DMO
    0055
    mp3dmod.dll
    6.3.9600.16384
    Any suggestions of where to start?
    Thanks

    Thank you for the information.
    I have read the source patching article and watched the video too.  Very interesting and an impressive function.
    I did also look at the Audio Conforming link a lot of which I didn't understand; I think though I did try what was suggested regarding XMP stuff although it did not make any difference with the file I had the issue with.
    My problem is that the audio just stops part way through the clip.
    I have reduxed into a new file all the audio/video from the original file from just before the audio disappeared and that seems to work OK.  Perhaps there is an issue with my original file.
    It doesn't help that I have a brand new PC and this is the very first video I have edited in Premiere CC as I had previously been using CS4 and even then I haven't used that for a while.
    Anyway, thank you for your help and I will see how I get on.

  • Restored today, but then downloaded and installed ios 7. on install restore point doesn't exist and only half a restore part way through ios 7, which has lost most stuff.  previous restore points dont seem to exist either only back in April

    I have restored earlier today and got a time confirmation afterwards.
    Have just installed IOS 7 to find that the restore point doesn't now exist according to itunes.
    The phone has made its own restore point part way through IOS 7 installation but half the stuff is missing.
    Help !!!
    I had loads of very important stuff on the phone.  But the only restore points now available are back in April

    I also have found out that having updated itunes that this has reverted to a previous setting of syncing my music!!
    What on eart is going on Apple ???
    This is really poor and not the firtst time these things have happened.  Billions of dollars and poor quality !!!

  • Embeded Flash files stop loading part way through after update to 10.2

    Hello, I am currently having an issue with Flash. After the last update to 10.2, flash files, both audio and video, stop loading part way through them and do not start up again. For instance, on youtube, about 2 minutes worth of video will load but load slowly and then stop completely. The only way to get it to advance is to click past the section that has loaded and it will load the next 2 minutes. On Myspace Music, a song plays about 40 seconds each time and stops completely and will not load anymore, even if I try to skip to another part of the song. I am running Windows 7 Ultimate 64bit edition with Firefox 4.0 Beta 12 64 bit edition as well. Also I have tried clearing my cache, cookings, temp files, removing and installing Flash countless times, including older versions, as well as tried Google Chrome and IE. All give me the exact same issue no matter what I do. It is really frustrating because I cannot watch or listen to anything embeded in Flash online without having to keep clicking the next section every little bit. If anyone can help, please do and I thank you.

    Hi, Since your OS is a 64bit, are you using the 32bit browser for IE? I see you have the FF beta. Have they come out with a 64bit browser? I don't follow the FF beta so if that's true, it's news to me.
    Let me know,
    Thanks,
    eidnolb

  • Photoshop CC 2014: HDR pro trying to merge 3 pictures part way through process stops.

    HDR pro gets part way through the process then stops as if nothing is open and I can carry on working in PS as if nothing processing. Have closed and opened again and shut down and restarted computer, also waited for a long time but still nothing happens.

    I copied that .jsx file to a new name "Xbytor Image Processor Pro.jsx" edit that file changed the string Dr Browns services to "Xbytor Image Processor Pro" then commented out all the code that added tools menu items but "Image Processor Pro" and I put that file into
    "C:\Program Files (x86)\Common Files\Adobe\Startup Scripts CC\Adobe Bridge" even though Bridge CC is 64Bit seems to use theat location.
    Bridge CC was updated by the creative clouds update and opens Photoshop CC 2014 now

  • How do I continue a migration from iPhoto to Photos that was interrupted part way through?

    I began a VERY large migration (40k+ photos) from iPhoto (v9.6.1) to Photos on an external hard drive.  I have a MacBook Pro with Yosemite 10.10.3 that is connected to a network that has a Synology network drive.  The iPhoto library is on that drive and I was wanting to create the Photos library also on the drive.
    The process was very slow and has taken days, but that is expected and it was definitely making progress (I could see the files being added over time). Unfortunately, the transfer was interrupted part way through (my kid closed my laptop, which disconnected it from the network). I tried to start it over with the partially created Photos library folder as the destination, hoping that it would pick up where it left off.  It worked until it reached the same files that were previously created. The migration stopped at that point, and the following error appeared: "Photos was unable to make a copy of your library before preparing it. There were file system or hardware issues…”  I assume the inability to overwrite previous files with the same names was the case of the "file system or hardware issues."
    Is there any way to either continue the migration from where I left off, or maybe even manually move the rest of the files over? Or do I have to wipe out the entire partially migrated Photos library and start over?

    You probably will have to start over
    And I suspect that you are incorrect - as far as I know NO NAS is formatted Mac OS extended - A NAS is basically a Linux computer with no display or keyboard that uses a Linux format drive - a headless computer
    Unless you have a directly connected drive correctly formatted you are cgoing to continue to have issues - your photos and your choice what risk you put them at but you are treading in very dangerous water with you set up - is it documented not to work and similar set ups have been reported here hundreds of times as causing major problems and losing lots of stuff
    LN

  • I upgraded iTunes to version 11.0.5 but now it does not sync my songs properly.  Some songs are synced entirely, but other songs stop half way through.

    I upgraded my iTunes software to version 11.0.5 but now it won't sync my songs properly, either on my iPod classic or on my new iPhone 4s.  The problem seems to happen with random songs: some songs will play through to the end, but other songs cut off part way through the song.  At first I thought my iPod was defective, but then it happened on my new iPhone 4s.  On my phone, I can see that the song is still playing, but the sound cuts off.  Can anyone tell me how to fix this?  Thank you.

    This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.

Maybe you are looking for