HT1586 Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

AppleTV has no analogue connections.
It has HDMI which can go to your TV or in theory to an AV receiver equipped with HDMI inputs.
Some HDMI amps/receivers and HDMI switches can cause glitches with AppleTV but it really depends on the particular device.
AppleTV also has optical out, so if you only wanted a connection for Dolby Digital or stereo feeds from the AppleTV you could connect AppleTV to teh TV via HDMI and also run optical to the amp.
Audio is output over HDMI and optical simultaneously.
AC

Similar Messages

  • Does hisense tv supporte the apple tv 3rd generation?

    does hisense tv supporte the apple tv 3rd generation?

    any tv which is fullHD or hdReady (but then atv3 will not work in fullhd of cause)
    and follow the hdmi and hdcp std's are supported
    there are not made for appletv tv's out there (at least I hope not as that would be as much a scam as made for xbox or playstation)

  • Does anyone know if the Apple Ipod 6th generation will play audio books from MP3 Format?

    Does anyone know if the Apple IPod 6th Generation will play Audio Books formated in MP3?  Thank you.

    It'll play MP3 files. Import them into an iTunes library and transfer them to it.
    (124848)

  • I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

    I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

    The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
    The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
    Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
    WDS network
    If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
    The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
    At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

  • Is there a nonwireless headphone that plugs directly into the iPad? Thank you Artie

    Hi, name is Artie, I am not tech savvy, but am an old geezer. My kid is laughing at me for buying an iPad. I think my question is simple- is there a headphone that plugs directly into the iPad? I am interested in something cheap/simple that will allow me to watch shows/movies on the iPad while sitting on the couch with the Missus while she watches her shows on tv. I have a separate keyboard which is Bluetooth, but would prefer simple headphones so I can leave a pair at all the locations I will be using the iPad at, on a regular basis. Thank you Artie

    The iPad has a standard 3.5 mm headphone jack on it.
    Any set of headphones with a 3.5 mm jack will work.
    Thank you Johnathan, but I think I stated that pretty clearly: "you can use any stereo earphones with a 3.5 mm plug."

  • My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!

    My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!

    Restart your phone by holding the sleep/wake button and the home button until it starts back up.

  • WiFi device that plugs directly into the USB slot on a printer?

    My next door neighbor has a MacBook with Airport installed.  She wants to use the portable around the house and send documents to a printer located in the basement.  She does not need a router to network additional devices, so what is the most reliable, reasonably priced device that plugs directly into the printer's USB port without the use of a cable (e.g. device with receiving antenna)?  Thanks.
    Bob

    Well, Badunit, it's more convenient and takes up less room if it plugs directly into the USB port, plus you save the cost of a cable unless one ships with the unit.  Here are two I found at Amazon:
    http://www.amazon.com/Compact-Wireless-802-11n-Newtork-Adapter/dp/B002VVITG8/ref =sr_1_6?ie=UTF8&qid=1311880281&sr=8-6
    http://www.amazon.com/802-11g-Wireless-Long-Rang-Network-Adapter/dp/B0035H4164/r ef=pd_cp_e_4
    Trouble is, they have too many negative reviews.  Besides, just how well do they work with the Airport Extreme card since most of these reviews are not Mac related, and those that are are negative?
    I'd like a device that is guaranteed to work well with the 2008 MacBook Airport card as the broadcast device.  Perhaps she will have to rely on a separate Linksys router with print server.

  • How do I limit access of a computer that is plugged directly into the router?

    I have an AirPort Extreme, Version 7.6.1  I need to limit access of a computer that's plugged by usb directly into the router.  I have the MAC address for this computer and have had restrictions on it the in the past, but it was connected by WiFi then.  How do I do this?  Do I limit access to the Ethernet ID?  I don't want to lock myself out trying to figure it out; I did that last night.  Can someone advise please.

    You could use OpenDNS's parental controls:
    http://www.opendns.com/home-solutions/parental-controls
    It can restrict access according to your specifications for everyone on your network.
    It's free.

  • Can my apple tv 3rd generation use dual power 110v/220v without a converter?

    Can I use a 220 v power source for my apple tv without using a converter, it is a 3rd generation. I have moved to China and brought it with me from the US?

    HDMI is the only supported method. There will be no guarantee with any converter. If it does work you will be unable to play protected content (ie iTunes, Netflix)

  • HT1435 My apple ipod 3rd generation just stopped and I have no battery icon.  Does this mean I must have the battery replaced or what?

    My Ipod Nano just quit working in the middle of my using it.  There is no battery icon of any kind.  Does this just mean I need to have a new battery installed and if so, where?

    Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.  Only they can tell you what is wrong with it after they examine same.

  • I have purchased an Apple TV 3rd generation and successfully installed it. I have enjoyed using this device. However, I don't see other devices other than iTunes on one of my Computers

    I bought the Apple TV as I have an iPAD 1st Generation, thinking I could pipe my iPAD to the TV. After messing around with it, and searching on-line, I find that I need an iPAD 2nd Generation as there is no app for mirroring for the 1st Generation.
    My other issue is; dDoes the Apple TV 3rd Generation allow access to other computers? I have a Media Storage device but the Apple TV does not "see" it, only one of my computers that has iTunes on it...I have almost all my media in Apple formats, but cannot access the device. It only allows me to see the iTunes app on one of my computers...why can't I connect to other computers on my network with this device?

    1, you can't mirror on the iPad 1 per se. However, some (not many!) apps do support explicit mirroring of the app's content. Note that the fact that an app supports TV out via the wired(!) HDMI / VGA doesn't necessarily mean it'll also work over the wireless AirPlay. (An example of them is ArtStudio for iPad. See the dedicated discussion at https://discussions.apple.com/message/18841572?ac_cid=ha123456#18841572 )
    2, the ATV can only access iTunes Home Sharing. No UPnP (see e.g. http://forum.maccast.com/index.php?/topic/18215-does-appletv-work-withe-upnp-med ia-servers/ ), no Samba, no AFP, no nothing. This is why you only see the desktop iTunes' shared videos.

  • Can connect to internet when plugged directly into linksys cable modem but

    I have an Airport Extreme router, am running Windows Xp, and can connect to the internet when I plug my laptop directly into my linksys cable modem. I can also connect to the internet when I plug directly into the airport extreme via cat 5 cable. However, when I try to connect wirelessly via airport extreme, I cannot get on the internet, even though it shows I have excellent signal strength on the laptop, have a solid green light on the airport, and all lights look right on the cable modem. It says something about error -6753. This is what I am doing now; I am connected to the airport via cat 5 cable, and am downloading all software / firmware updates for the airport, do you think this will fix my problem? How do I diagnose if my problem is with the wireless settings on the laptop, or with the airport? thanks, this is extremely aggravating.

    Welcome to the discussions forums airporteggstreme.
    I found a couple of posts that may be relevant. They point to the fact that your PC may be looking for a different address when it's connected wirelessly versus its wired connection. I believe you'll solve the problem by making sure both your Airport and your PC are configured to get their IP addresses via DHCP. If all else fails "hard reset" your Airport, unplug your PC's Ethernet cable and set it up wirelessly. That should work.
    Here's the link: http://forums.whirlpool.net.au/forum-replies-archive.cfm/228336.html
    It refers to an Express but the Extreme will be similar. If you scroll way down you'll find the following:
    In order to configure the Airport Express you not only need to connect to it as the access point but *also need to treat it as a DHCP server.*
    If you connect the the AE as a base station but do not have "Obtain IP address automatically" in your network settings you will receive error code -6753. I racked my brain on that for a while after doing a number of hard resets. Once I went into my PC's network settings and removed the manual IP address I had set there (192.168.15.104) and set for automatic ip address retrieval I was able to configure the AE using the admin utility.
    Once you have finished configuring the base station and set it to join your existing network, you can change your PC's IP back to whatever you need for your own purposes.

  • How can i prioritize PBX over Router? (PBX and Router plug directly into Modem)

    Hello everyone,
    I work for a small ISP and i just got hired here a couple months ago. I've been tasked to figure out a solution to this problem. We have customers that have a network, and they also have a phone system. Both devices (router and PBX box) have a static IP address and plug directly into the modem. The issue we see is that the internal network is hogging the bandwidth and this kills the phone systems quality. What i tried was putting a 2960 in between the modem and router/PBX system. Then rate limiting the port to the internal network but it doesn't work out so well. I have it set to use 8mb/800bk. Which should dedicate 2mb/200kb for their phone system at all times. But when i do speed tests i get 2mb down and 200kb up. My download speeds are not right, yet when i do a "no mls qos" the download goes to the 8mb i have set, but then my upload doesnt work correctly. Does anyone have an idea to fix this? Or any better ideas? 
    no aaa new-model
    system mtu routing 1500
    ip domain-name XXXXX.com
    mls qos
    spanning-tree mode pvst
    spanning-tree extend system-id
    vlan internal allocation policy ascending
    ip tftp source-interface Vlan1
    class-map match-all RATE_LIMIT_CLASS
      match access-group name RATE_LIMIT_ACL
    policy-map RATE_LIMIT_POLICY
     class RATE_LIMIT_CLASS
      police 800000 8000 exceed-action drop
    interface FastEthernet0/1
     description Internal Network
     speed 10
     duplex full
     srr-queue bandwidth limit 80
     service-policy input RATE_LIMIT_POLICY
    interface FastEthernet0/2
    description PBX Box
    ip http server
    ip http secure-server
    ip access-list extended RATE_LIMIT_ACL
     permit ip any any
    access-list 50 permit X.X.X.X 0.0.2.255
    line con 0
     logging synchronous
    line vty 0 4
     access-class 50 in
     logging synchronous
     login local
    line vty 5 15
     access-class 50 in
     logging synchronous
     login local
    end

    Heres an update, even with the Router plugged into fa0/1 with the following config, it still only gets 2.5mb down. Ideas? Could it be because the ports on 10mb?
    interface FastEthernet0/1
     description Internal Network
     speed 10
     duplex full

  • Can I use the iPod touch 3rd generation with these speakers?

    I wanna buy some speakers. But now I feel a bit uneasy. My question:
    Can I use the iPos touch 3rd generation ( http://store.apple.com/ch-de/browse/home/shopipod/family/ipodtouch 32 GB ) with these speakers ( http://store.apple.com/ch-de/product/TR142ZM/A?fnode=MTY1NDA1NA&mco=MTE0MDM5Mzg ) ?
    I know that only first & 2 Generation is. But if I want to buy cool speakers, which should I buy then?
    Thanks for help
    (and sorry for my english, I'm swiss xD)

    You cannot.
    You would have to buy a new one.
    Apple will gie you a 10% discount on a new ipod if you bring in an old one for recycling.

  • HT1510 Is there a way to get the IPod Shuffle 3rd generation to go to the beginning of the playlist/music so I can go on the "Play In Order" mode and have it start from the beginning.

    Is there a way to get the IPod Shuffle 3rd generation to go to the beginning of the playlist/music so I can go on the "Play In Order" mode and have it start from the beginning.

    gakansas wrote:
    It has some songs I would like to keep
    There is no legal way to do this-  You would need to be using the same AppleID (account)
    As far as deleting the songs, in a situation like this, you should restore the iPod which will delete the songs as well as allow you to sync your own music.
    For instructions on how to delete/add songs  it's best to check the manual:
    http://support.apple.com/manuals/#ipod
    As far as restoring, you didn't mention what model you are using but just choose your model from here (they have step by step instructions):
    http://www.apple.com/support/ipod/

Maybe you are looking for