HT1595 Cannot connect Appletv to wifi network

Appletv doesn't see my wifi network. It doesn't see it when I enter my IP address manually. Help?

If there is no network entering an IP address does nothing since it would not beable to connect to that IP. If your WiFi network is not comming up it might be one of the things below. While it is possible to use AppleTV with WiFi and will mostly work it is not extreamely reliable. Streaming video, espeically HD video over WiFi usally does not work that well for very long. So you would probably be better off using a wired connection. It is up to you though.
Things to look into:
    1. ATV may be too far from the router.
    2. The router my be set to not broad cast it's SID which would prevent connecting devices from seeing it.
    3. The router might have MAC address filtering turned on which could be preventing ATV from being able to cnnect to it.
     4. The router might be configured to use one of the Enterprise encryption standards that ATV does not support.

Similar Messages

HT4262 I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate.

I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

Cannot connect to my WIFI network since updating to IOS 7.0

Since updating to IOS 7.0, I have been unable to connect to my (or any) wifi network.
I have tried every suggestion / help from the forums / web searching.
I have tried different wifi connections (all the same - unable to connect to network).
Waited for the 7.0.3 to see if this has fixed the problem, but no..
I'm extremely frustrated and would like Apple to help.. I'm not the only person with this problem - and I haven't seen a single response from apple regarding this.
Since I am now out of the 1 year warranty - I will be pursuing this through the 'sale of goods' act in the UK if I don't receive a satisfactory response - I expect my device to last longer than a couple of years and consider the ipad broken as a result of the update...
Have been very happy with my apple devices up to this point, but loosing patience now!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

[WORKAROUND] Cannot connect to any WiFi network after resume

Hi, I'm having one weird problem that makes my laptop not as mobile as I'd like it to be..
Literally, I have to boot it up again after each move.
Here's the issue: if I suspend to ram, and then resume in a place with different WiFi network, it can't connect to Internet again.
I'm using NetworkManager via corresponding plasmoid in KDE (although, nmcli does not work either).
When I click a network name, I get the following:
"Configuring interface" .... -> Cannot connect to {NetworkName}
(the labels might be a bit different, as I get all notifications in my local language)
Have anyone experienced this before?
Or, AT LEAST, how can I get a bit more verbose output from NetworkManager? Is there a log file?
Here's the hardware:
05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Here's what I've tried already (and it didn't help):
# systemctl restart NetworkManager
# modprobe -r ath9k
# ncmcli nm sleep false
WORKAROUND FOUND: When I get "Configuring interface" .... -> Cannot connect to {NetworkName} (it happens not only after resumes, btw), I type the following in the console:
sudo dhcpcd -k
So much time passed, so many updates -- still have to do this manually... %)
Last edited by mityukov (2013-12-03 10:19:12)

hadrons123 wrote:Try these methods
https://bbs.archlinux.org/viewtopic.php?pid=1241694
Here's what I've tried:
# stop NetworkManager first, just in case if it would not start anything before time
sudo systemctl stop NetworkManager
# kill wpa_supplicant (one of suggestions in the topic)
sudo killall wpa_supplicant
# re-load kernel module with nohwcrypt=1 (another suggestion in the topic):
sudo modprobe -r ath9k
sudo modprobe ath9k nohwcrypt=1
# start NetworkManager again
sudo systemctl start NetworkManager
Then tried to connect the network again: the issue is till the same. Here's the latest dmesg:
$ sudo dmesg -c
[ 3079.006749] ath9k: ath9k: Driver unloaded
[ 3111.623220] cfg80211: Calling CRDA to update world regulatory domain
[ 3111.694588] ath: phy0: ASPM enabled: 0x43
[ 3111.694594] ath: EEPROM regdomain: 0x65
[ 3111.694596] ath: EEPROM indicates we should expect a direct regpair map
[ 3111.694599] ath: Country alpha2 being used: 00
[ 3111.694600] ath: Regpair used: 0x65
[ 3111.697195] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 3111.697465] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900140a0000, irq=16
[ 3111.717234] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3136.958046] r8169 0000:03:00.0 eth0: link down
[ 3136.958159] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3138.903691] wlan0: authenticate with 00:24:8c:65:bb:d5
[ 3138.911517] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 3138.911567] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
[ 3138.917180] wlan0: authenticated
[ 3138.917697] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 3138.917711] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3138.917718] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3138.918897] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
[ 3138.932402] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
[ 3138.932553] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3138.932790] wlan0: associated
[ 3139.406632] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
[ 3139.415815] cfg80211: Calling CRDA to update world regulatory domain
[ 3143.712977] wlan0: authenticate with 00:24:8c:65:bb:d5
[ 3143.720532] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 3143.720582] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
[ 3143.731367] wlan0: authenticated
[ 3143.731865] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 3143.731882] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3143.731888] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3143.735093] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
[ 3143.748277] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
[ 3143.748533] wlan0: associated
[ 3144.140732] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
[ 3144.148708] cfg80211: Calling CRDA to update world regulatory domain
[ 3148.642615] wlan0: authenticate with 00:24:8c:65:bb:d5
[ 3148.650085] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 3148.650132] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
[ 3148.665772] wlan0: authenticated
[ 3148.666264] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 3148.666278] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3148.666284] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3148.667980] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
[ 3148.681955] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
[ 3148.682212] wlan0: associated
[ 3149.016733] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
[ 3149.031462] cfg80211: Calling CRDA to update world regulatory domain
[ 3153.648602] wlan0: authenticate with 00:24:8c:65:bb:d5
[ 3153.656323] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[ 3153.656374] wlan0: send auth to 00:24:8c:65:bb:d5 (try 1/3)
[ 3153.659859] wlan0: authenticated
[ 3153.660389] ath9k 0000:05:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 3153.660403] ath9k 0000:05:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 3153.660410] ath9k 0000:05:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 3153.663889] wlan0: associate with 00:24:8c:65:bb:d5 (try 1/3)
[ 3153.672276] wlan0: RX AssocResp from 00:24:8c:65:bb:d5 (capab=0x411 status=0 aid=3)
[ 3153.672536] wlan0: associated
[ 3153.967817] wlan0: deauthenticating from 00:24:8c:65:bb:d5 by local choice (reason=3)
[ 3153.980619] cfg80211: Calling CRDA to update world regulatory domain

Why my MacBook Pro cannot connect to any wifi networks while there was no problem to doing that in the past p?

I used to connect wifi now I cannot. Why? Need to obtain new IP address and how ?

Hi Ole, and a warm welcome to the forums!
It could be a HW problem, but does it get many black bars in the Airport icon?
See if this helps hers...
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select her access point(s) and Remove all her access point with the minus button.
Launch her keychain access in Utilities and delete her access point keychain entry.
Reboot
Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.

I just downloaded ios 6.1 on my iphone and now i cannot connect to any wifi networks on my mac

Can someone help here?

Updating iOS on your phone would not have any effect on your Mac.
What exactly is the problem?

How can i connect to a wifi network with no internet connection?

I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?

nikhildhoot wrote:
I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?
Your saved wifi networks should connect automatically whether internet is available or not, you may receive a notification "there appears to be no internet connection".
Update to 10.2, if not available from your carrier then use Sachesi (see other threads).

Trouble connecting to a WiFi network in OS X Mountain Lion

Why is it that sometimes I cannot connect to a WiFi network unless I move that specific network to the top of the list of my preferred networks under a profile in my WiFi settings? I dont understand it because OS X Lion had the same problem. Sometimes when I am connected to a WiFi network, it acts like it isn't connected, and I can't use Safari or any other interet-based application. It gets me so fustrated!

After countless hours, and two hours of a phone discussion with MSU support, the support person figured out the issue.
There are two articles that I am sure explain this much better which I will place in this post. Read the articles to their entirety if yo want to know what is going on. My original understanding of the root cause was actually incorrect. However, the fix seems to work.
The fix was fairly easy. Basically I had to load FireFox, and load the webpage from MSU that was sending the certificate. Then export that certificate, import it into the keycahin, then mark the cerificate as "Always Trust".
I actually did this for two certificates: guestlogin2.wireless.msu.edu.crt and dhcp.msu.edu.crt. I had to do this for each user on the account, and reboots were required. It seems to have fixed the issue. (3 MacBooks so far)
http://superuser.com/questions/349740/mac-os-x-lion-10-7-2-update-breaks-ssl
Useful clip from the above:
In my experience this happens only when connecting behind a captive portal. I think the reason is that the operating system tries to validate the certificate of the captive portal's login page, but the validation process requires internet access. I was able to fix this problem by manually adding the certificate of the captive portal page to the keychain and marking it as always trust.
You can export the certificate with the following steps:
Visit the captive portal page in Firefox
Select Tools > Page Info > Security > View Certificate > Details > Export
Save the certificate to your hard drive with the extension ".crt"
You can import the certificate with the following steps:
Open Keychain Access.app
Drag the certificate from Finder into a keychain
Double click on the certificate and expand the "Trust" section
Choose "When using this certificate: Always Trust"
Close the popup window
If you cannot open Keychain Access because your keychain is corrupted, turn off wireless, delete~/Library/Keychains/login.keychain and /Library/Keychains/System.keychain, and then reboot.
Another article:
http://apple.stackexchange.com/questions/37829/why-wont-my-macbook-pro-connect-t o-wi-fi-networks-that-use-a-sign-in-page-capt
Clip from the above:
Export the captive portal's SSL certificate with the following steps:
Visit the captive portal page in Firefox Select Tools > Page Info > Security > View Certificate > Details > Export Save the certificate to your hard drive with the extension ".crt" You can import the certificate with the following steps:
Open Keychain Access.app Drag the certificate from Finder into a keychain Double click on the certificate and expand the "Trust" section Choose "When using this certificate: Always Trust" Close the popup window.
Some folks reported corrupted keychains from this problem; I have not had that issue but if you cannot open Keychain Access because your keychain is corrupted, turn off wireless, delete ~/Library/Keychains/login.keychain and /Library/Keychains/System.keychain, and then reboot.

When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

I have 2 ipod touch 3rd gen. Cannot connect to my wifi. One will connect with neighbor's unsecure network..neither connect with my secured network

I have 2 ipod touch 3rd generation. Cannot connect to my wifi. One will connect on and off to my neighbor's unsecure wifi but neither will connect to my secured wifi. All my wireless computers connect plus my Ipad connects. They did connect at one time but haven't used them for anything but audio books which connect through Itunes on my computer. It shows my secured network name. When I originally connected them it was another rather with other security but since then I have bought new equipment. My Ipad and my printers just automatically connect. I have put in the Ip information plus but still no luck.

Try :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
Bob G

I have a new comcast modem i have connected to Time Capsule with cable, TC in double NAT. As when I tried it in bridge mode I cannot use Sonos, the units will not connect to the wifi network? I thought Bridge mode would make the wifi signal better??

I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
So two questions, does the Bridge mode give a better wifi signal then double NAT?
Why will sonos not connect to the network when in Bridge mode?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

I suddenly cannot connect to any wifi with my ipad 1. In settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal.

I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

IPod touch appears to be connected to a WiFi network but cannot use Wi-Fi for checking email and surfing the Internet.

hellpp

You may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest firmware from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

HT1595 Cannot connect Appletv to wifi network

Similar Messages

Maybe you are looking for