HT1595 cannot connect ATV to actiontec router with wired ethernet. router does not see ATV. is there a way to test the ATV ethernet port on the back?
have an 3g ATV (5.0 4099) wired via coax cable to actiontec MI 424-wr router. Router cannot see ATV. Is there a way to test ethernet connector on back of ATV? ATV does work when setup for wireless but its much too slow for actual use when configured that way.
Steve,
I think the isssue is clearly that your router is not acting as a DNS Server. You will need to contact Verizon to see how to configure it so that it does supply the DNS addresses. If you can configure it in your Router try using 8.8.8.8 and 8.8.4.4 as the DNS Server addresses. These point it to Google's Public Domain DNS Servers. There are others (opendns.org). But for now these will hopefully get you up and running.
Similar Messages
-
My iPod touch cannot access wifi from work . I get message browser does not support HTML redirect . I've tried alot of suggestions nothing seems to work . Can anyone help me out with this . I also have been getting booted alot while trying to check out my App Store
What does your work IT staff say?
It might be related to this previous discussion.
https://discussions.apple.com/thread/4359363?tstart=0 -
Cannot connect to Internet wirelessly or with wired connection
Hi!
I have a wireless linksys router connected to a wired linksys router (for vonage). My PC is wired to the wireless router and works fine. My Powerbook G4 was working fine on the wireless network too.
Then, I decided to try to add an Airport Express just for streaming music (it is not wired to the wireless router). I have messed something up. Now, even with the AE unplugged, I can log onto the Linksys network, but the Internet connection does not work. Also, when I Turn Airport Off and wire directly into the router from my G4, I cannot use the Internet.
I've restarted everything I can think of. Any ideas?
Thanks!Sounds like you need to restart the modem and hard reset the Linksys router which is connected to it. Then reconfigure that Linksys router and verify connection (Ethernet and/or wireless). After you get that setup you can add the other devices.
-
Hi, i have received an iphone 4s from japan! whwn i connect it to my pc, itunes does not recognise it. what can i do?
For this issue you might try a couple things.
First, try to restart the Apple Mobile Device service by clicking Start and searching for Services. Stop the service, then restart the service.
If that doesn't work, you can remove and reinstall iTunes.
http://support.apple.com/kb/HT1923
This article will help with that process. Follow it exactly. -
I am having trouble getting my macbook to connect to my tv. When I connect my mac to the tv via VGA I have no problem. It detects it right away. I just purchased a HDMI cable because I didn't want to have to use speakers when connect to my TV and it will not detect the computer. The HDMI is a good cable because it connects our apple tv to the tv, so I know it works.
When I connect the HDMI cable to the tv and my computer, the screen on my tv flickers once and it seems like it is connected. It then flickers one more time about 5 seconds after like it disconnects.
When I use my VGA it gives me an arrangement tab in the displays, I do not get that when I plug my HDMI in. I get nothing. Is there something else I could do?Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......
-
When I place an Aperture photo on the cloud to share with friends, the idenfifcation information I have entered for the photo does not transfer to the cloud and thus my friends get only the photo. Is there a setting I am missing that would allow the text to go along with the photograph?
The photo stream will transfer the EXIF information set by the camera and the filname/version name. Try to get any information you want to transfer into the filename by batch changing the filename with "write to master" enabled. Aloso, you can set a comment, when sharing the image to the Photo Stream.
-
How can sync my i pad to my pc with window xp, itunes does not registerer the ipad
how can sync my i pa2 to my laptop window pc with xp and itunes does not see the i pad2
Have you got the latest itunes updated ?
This link might help http://support.apple.com/kb/ts1538 -
I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.
Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card? -
My ipad will not turn on. It was fully charged before it just died and would not turn back on. When I hook it up to my computer on itunes it says cannot connect because it is locked with a passcode. I know my passcode but the screen is just black, no power, so I cannot enter a pass code.
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee
Try putting it in DFU mode and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all
Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility. -
i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME
i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME
-
After upgrading to Mavericks my iMac does not see my Sony camcorder anymore. I tried the new iMovie as well as the old version 9.0.9, which is still in Applications. I checked the camcorder and connections in iMovie on my MacBook (not upgraded) and that still functions properly, so the problem does not seem to be in iMovie, old or new, or in camcorder and connection.
Anybody with the same problem or a solution?
Thanks mbkomTry this
-
iPod nano 6th generation, syncing with audiobooks does not work now, had been working. Sync test says: No iPod touch, iPhone, or iPad found. Connectivity test OK, no physical problems, iTunes shows the iPod. Any clues what to do?
Hmm.. Thank you for the response.
Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
B-rock -
My wife and I cannot connect in Game Center to play a game using IPhone 5 and iPhone 4 (both running ios 7) when we try, we just get the message "waiting"
Hello, TheHelper1964.
Thank you for the question. There could be multiple causes to the errors that you are receiving. I have included a couple articles that will help you troubleshoot this issue.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com.
Hope this helps,
Jason H.
Maybe you are looking for
-
Update Adobe Acrobat 8.0 Windows7
I have Windows 7 x64 and Adobe Design Standard CS3. I would like to make an update of Adobe Acrobat 8.0 to 8.1. or 8.2 version. However I can't do it. I would appreciate any tips.
-
Still failed to read email attachment, both Mail and Enturoge
I can't open email attachments (tif and jpg) after installation of OS X 10.6 by using Mail. I today installed MS Enturoge but still having same problem as Mail. Can Apple tell me why? And how to solve this problem?
-
Hi, I have a 13" MacBook Air, Mid 2013. I am really worried about dropping my MacBook and breaking it. I am looking for a reasonably priced have duty case, like the ones that snap on to it and I have full flexibility of the hinge and that. Could anyo
-
Program name through Interface ID's
Hi, I need to find the Program which will send an Outbound file using the Interface ID KW*. Is there a table which would help me with this. My team mates suggested some T9* table. Would be helpful if someone could elaborate on this. Thanks.
-
Number of Contacts ebbs and flows from 700 to 20,000+
I don't know if it is BB, LinkedIn, Riva (CRM syncing software), or whatever else, but for the past year, I have had the priviledge of seeing the number of Contacts in my BB go from 700 to 20,000+, and back down again, several times per month. Not on