HT1595 setting date and time on apple tv

Cannot set network date and time using apple tv

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Similar Messages

  • How do I set date and time on apple tv?

    How do I set date and time on apple tv?

    Fixed the same problem, STEPS
    1. Reset your apple TV
    2.It will again stuck on that setting, ignore it by press menu
    3. Unplug ethernet wire
    4. Try to connect with wifi, it should be work with wifi connection as mine.
    5. Then you can switch back Ethernet wire after get fixed.
    Thanks. Lemme know dude if it's work.

  • How to set date and time on apple tv

    how to set date and time on apple tv

    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT3180 Can't set date and time on apple tv

    I cannot set date and time. Help!

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

  • HT3180 setting date and time - my apple tv get stuck and says it needs to set the network date and time.  Does anyone know how to do this?

    My apple tv gets stuck and says it need to set the date and time on the network.  Does anyone know how to do this?

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

  • HT1595 Setting date and time

    I cannot get the Apple TV to move past the date and time issue. We have had it over a year and never had this problem. We have restarted both the Apple TV and the wireless router. Internet is working on all other devices. Help!

    Hey maradi, have you figured out the issue? I'm having the same EXACT problem!!!

  • HT1595 Setting date and time is going around and around

    Hello could someone help me?

    Hey maradi, have you figured out the issue? I'm having the same EXACT problem!!!

  • HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

    I just went through this last night. (Aug 15, 2013)
    What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
    Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
    Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
    Power both items back up.
    At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing.  But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
    A new issue that is was able to fix after a good nights sleep.
    I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
    Once I typed out my full ID and PW. everything is back to 100%

  • HT1595 how do i access apple tv when screen is stuck at setting date and time

    how do i access apple tv when screen is stuck at setting date and time, have unplugged system,restarted router....

    Welcome to the Apple community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I bought my apple tv in USA and use in Indonesia, but I can't set date and time.

    How to set date and time so I can Home sharing with apple tv .

    Call the shop in NYC and find out.

  • The apple tv is stocked at setting date and time

    I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?

    http://appletv2.com/stuck-on-setting-date-and-time-fix/

  • HT1595 The date and time can't be set? What to do?

    The date and time can't be set?

    I'm having the same issue today on several of our Apple TVs. I am the Director of Technology in a school district and starting this morning I am getting reports that Apple TVs are not working and upon investigation they all sit at setting date and time. All network setting are properly configured. The firewall is set to allow port 123 both TCP and UDP from all internal clients. It occurs both over WiFi and Ethernet.
    Is the Apple Time Server experiencing issues?

  • Having problem with the apple tv, because it still setting date and time and dont finish w the activation

    having problem with the apple tv, because it still setting date and time and dont finish w the activation

    That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.

  • I plug the Apple TV in and it just says setting date and time.

    When I plug the Apple TV in it just starts up setting date and time. Tried unplugging  it and resetting using the remote but it is unresponsive

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT1595 Stuck on Setting Date and Time

    Will not set Date and Time (just keeps trying).

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

Maybe you are looking for

  • Field in data file exceeds maximum length

    Hi, I am trying to run the following SQL*Loader control job on my Oracle 11gR2 . Running the SQL*Loader control job results in the ‘Field in data file exceeds maximum length’ error message. Below, I am listing the control file.Please Suggest. Thanks

  • Payables Accounting Entries Report

    Hi all, when we run this report (Payables Accounting Entries Report), we see asterisks (*) for the following rows : Total for Journal Category: Purchase Invoices *************** *************** Total for Set of Books: Select Medical Corporation *****

  • Create new folders for old messages on my computer

    How do I create new folders in my computer to archive old messages and save them to my computer.

  • Connecting SQLDeveloper to 11g database

    i need to make new connection for SQLDeveloper connecting it to the 11g database SYSDBA account , plzzzz tell me how to do this

  • Repeat workflow by termination event

    Hi I’m developing a workflow to assign a SAP position for a New Hire employee. The sceniro is “ If an employee is hired with default position, then WF have to be triggered to HR Administrator.So far the workflow is working fine. But there is a new re