HT1600 appleTV not setting date and time

cause of why apple TV not able to identify itunes to set date & time, gen 2 ?

Morning bmrug,
Thanks for using Apple Support Communities.
make sure your router isnt blocking ports.
For more information on this, take a look at this article:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/ht2463
TCP port 123 is used to communicate with a network time server.
Best of luck,
Mario

Similar Messages

  • Can not set date and time

    i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can not set date and time on a new Apple TV

    can not set date and time in a new appletv

    Hello lfsalas55,
    You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • My AppleTV cannot set date and time. I've reset it, but after 3 hours, it is still trying

    My AppleTV used to work fine. Someone messed with my Time Capsule, so I had to have it worked on. Since it was messed up, the AppleTV can't function. I reset it and updated everything. It said "Activating" and "setting date and time". After 3 hours, it is still trying to set the date and time. Now what do I do? Thanks for any help.

    As I previously wrote in a former post:
    I will first assume you are still setting up your new Apple TV. Is this is the case, use a website like canyouseeme.com to check if port 123 is open. If it is not, this is your issue of your Apple TV not being able to connect to the timeserver. Try contacting your Internet Service Provider for help with opening this port.
    Otherwise, try hard resetting your Apple TV by disconnecting all power for 30 seconds. If the problem still persists, you may try hard resetting your router by also unplugging all power for 30 seconds.
    Hope this worked out well for you. If you are having further troubles you can always connect it to iTunes using a micro-usb and restore it. Lastly, the Genius Bar will be more than happy to fix the problem for you if you'd like to make a reservation for your local Apple Store.

  • HT1595 Stuck on Setting Date and Time

    Will not set Date and Time (just keeps trying).

    I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
    https://discussions.apple.com/message/20008613#20008613
    In case that message disappears, here's my translation:
    1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
    2. Download the older 5.0.2 firmware from Apple here:
    5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
    4. In the dialog that opens select the firmware that you downloaded.
    5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

  • HT1595 My AppleTV seems to be stuck on the "Setting Date and Time" load page

    I just moved from a house to an apartment and when I hooked up my appleTV it said "Setting date and time" with a spinning load wheel and it's been doing this for a long time now. I hit MENU on the remote and tried going to Settings> General> Network like it said at the bottom of the screen, but nothing happened. It's connected to the right WiFi network, but the only icons it shows on the home screen are the 'Computers' icon (for Home Sharing) and the 'Settings' icon. My movies, music, tv shows, netflix etc. icons aren't showing up. I restarted it and got as far as the "Setting date and time" load page again, where it just sits and loads.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • "RT Set date and time" does not set seconds in UTC mode

    Hallo,
    I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
    Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
    Can anybody help me with that problem???
    Thanks
    Florian
    Solved!
    Go to Solution.

    Hi Andreas,
    well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
    My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
    I suspect  that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
    As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
    Thanks so far 
    Florian

  • I get the message  on Apple TV "setting date and time"

    I get the message  on Apple TV "setting date and time", but seems to be stuck in that action. When I check, network settings, everything seems OK.  Any suggestions?

    This will normally happen if you continually turn the AppleTV off at the wall (happens each time you turn it on). If its stuck on that, just turn it completely off, then see if it gets stuck on that again. If it keeps getting stuck (as in for more than 5 minutes) on it, plug it into your computer and attempt to update the AppleTV. You may need to restore it if the software is already up to date or it's still not working after the update.

  • Is there a way to force time can only be set to "Set date and time automatically"?

    I am using OS X 10.9 .5 , and here is what I want to do.
    When you click "Open Date & Time Preference", you will find an option that states "Set date and time automatically". And of course you can chose not to do that, and adjust the time.
    But can you remove that option? So your OS X is forced to chose the mode "Set date and time automatically" no matter what you do? (aka you can't adjust the time by yourself now.)
    Is that possible? Is there an app that can achieve this goal or can you do that at Terminal?
    Thanks in advance.

    There's a similar setting in iPhoto preferences (in iLife '08 versions and later), or in Image Capture preferences (if you're using iLife '06 or earlier). Check those settings as well.

  • How do I change the "Set Date and Time Automatically" server

    Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

    sig wrote:
    The menu has a drop down. But if you know the address of another time server I would think you can type it in.
    Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
    charlie

  • Keychain problem and "Set date and time automatically"

    Something very strange appened to me today. I spent a few hours to get it through.
    All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
    Sorry for my English (I'm from Italy).
    Someone got the same issue?

    That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
    Would you mind double-checking the following setting, using the AirPort Admin Utility?
    AirPort Tab - Base Station Options: Logging/NTP
    - Set Date & Time Automatically: time.apple.com (checked)
    Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router?

  • Set date and time

    I recently updated the apple tv .It was fine after the update although i did not use it as i was on my way out after the update.Days later when i put in on it cant seem to open itunes.reason being network time cannot be updated.i tried sighning out and now i cant sighn in.I tried reset that just brings me to a halt on screen that says activating setting date and time.Does any one know whats going on.Is the time server down ? Or something .Itune store sighn in works well in my pc ,ipad and other devices no problem.
    And i tried putting off all firewalls in router but no luck.
    Its connected wirelessly to the same router which normally works
    Any idea guys

    HI
    I have tried everything possible such as router firewall settings changing DNS servers using WIFI and ETHERNET nothing works.Waited for more updates nothing so far.The only solution is to down grade the firmware through itunes .Using now 5.0.2 works like a charm .Don't wait any longer just search apple forum for procedure and follow.Use a mac better.It takes only 5 minutes for the process.All you need is a mac or windows pc,usb cable,the type that goes behind the apple tv,(I used a blackberry bold 9900 original cable),software known as ipsw.YOU DONT NEED TO POWER THE APPLE TV WHILE DOING THIS.IT WILL LIGHT THE LED FROM PC POWER.GO TO https://discussions.apple.com/thread/4419016?start=0&tstart=0  Read procedure written by cwlown .JUST MAKE SURE FOR MAC HOLD OPTION KEY DOWN THEN CLICK RESTORE .POINT TO THE DOWNLODED ipsw AND RUN.FOR WINDOWS HOLD SHIFT THEN CLICK RESTORE .POINT TO Ipsw download and run.There is no neen to unzip or extract ipsw.I had a problem when using windows xp ipsw did not show up as an upgradeable firmware therefore could not run it.I did not want to waste time and used the mac instead.I think renaming the ipsw in windows could have cleared the problem.Another thing is after the downgrade itunes will say that your APPLE TV is restored to its factory defaults don't worry the job is done ,check your software on the APPLE TV THROUGH your tv LOCATED at general then about.SETTING up the ATV first connect the wifi or lan cable select location first THEN sign in.

  • Set Date and Time Automatically...doesn't

    We've noticed that the setting to automatically synchronize date and time to Apple's time server doesn't work if the system preference is 'locked'
    In other words, if the user that's logged in currently, isn't an admin user, then the machine doesn't set the date and time automatically.
    As soon as you unlock the system preference by clicking the padlock at the bottom, the date and time sync as they should.
    Anyone else noticed this?

    We do want the clock correct. The issue here is that the internal clocks drift - as I understand it, this is the one of the main reasons behind using a network time server.
    With the Date and time preferences set to 'Set date and time automatically', the but with the lock at the bottom corner locked- it's as though being locked is preventing the automatic date and time settings from updating.
    But the preference is checked on, and so the clock should be 'resetting' itself as necessary.
    To give an example- say the machine has been off for a while, and unplugged. This will cause the machine not to know what the Date and Time is. When the machine starts up, the preference should kick in, and the machine should 'Update date and time' automatically.
    But it doesn't. So long as that padlock is locked, even though the preference is checked on, the machine will not alter the date and time - until the padlock is unlocked.

  • What happened to the Get/Set Date and Time utilities from RT 7.1?

    I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites  call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

    In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
    This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

  • I am getting a message "setting date and time...." but nothing happens

    My Apple TV has stopped working. I start up and it says "setting date and time...." but I cannot access the internet.

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Maybe you are looking for