HT1600 Downgraded Netflix quality after Apple TV update

My Netflix streaming looked amazing until I applied the update. Now everything looks Youtube quality: blocky, smeary, watery...

Netflix adjusts based on your network connection. I would verify that first.
Check speedtest.net to see current connection
Go to istumbler or netstumbler and see if there is any network interference
Make sure your DNS is set to your ISPs (settings - general - network - configure DNS - automatic)

Similar Messages

Trouble with home sharing after apple tv update

trouble with my home sharing after apple tv up date

Same here. iPhone, Mac Mini and Apple TV3 are all up to date. Logged in and out on each device and home sharing and airplay still don't work at all. Nothing shows up in the remote app. They're all on the same network and have been. The only thing I can think of is the most recent ATV firmware update, but why would my phone be unable to see my computer??
Any secret commands to try?

Apple Logic Pro Crashing after Apple Security update

Everytime I try to open up a Logic Project in my 3.0 Ghz Mac Pro Logic will not open and just crashes. This started happening after I updated with the new Apple Security update. Most of the Logic Projects were done when I had the 2.5 Ghz Quad. Not sure if it was the Security update or using the intel mac to open older projects.
My current set-up Apple Mac 3.0 Ghz Xeon chip Configuation. 3 gb of memory.
Any help on this would be a great. I have a performance in three weeks and have to get this sorted out before hand so I can master my instrumentals.
Steve

I have the Mac Intel 3.0 as well, and it's working pretty well. I do open up Logic tracks that were created on a G5, with only one big problem, all of the program change boxes become checked. Also, the old environments can cause problems.
I notice your profile says you're running system 10.4.6. If so, you should upgrade to at least 10.4.8. Trashing your preferences is also good, as is repairing permissions. 3 Gig of memory should be fine until you go nuts with plugins.
I've upgraded to 10.4.9, but you have to download the combo install from the Apple web site. The incremental upgrades create problems.
After you've upgraded Logic, try opening up a blank Autoload. If that opens, then the program is working, at least that far. You might have to rebuild your Environment from scratch. No fun, but it will eliminate problems from earlier sequences. Good luck.

Apps not working after Apple ID updated

Contact, Calendar, Reminder, Maps, App Store, Textedit, etc... bounce but not open after clicked.
All apps working fine after installed OSX Mavericks, before Apple ID updated.

Contact, Calendar, Reminder, Maps, App Store, Textedit, etc... bounce but not open after clicked.
All apps working fine after installed OSX Mavericks, before Apple ID updated.

2nd incident: no workie after apple sw update

long time mac owner, but currently a frustrated one...
imac less than 6 months old, and for the 2nd time after updating sw i am unable to use the machine. first time was after a security update, and the whole disk permissions / drive errors fiasco which resulted in a fresh OS install and unfortuantely some data loss (but machine was only a few weeks in use, so no biggie). now after installing (what seems to be weekly itunes updates) machine won't start: flashing ? folder.
started from install DVD and ran disk utility: it lists the internal drive, but won't let me actually do anything to it (i.e. can't mount, verify, test, nada).
next i thought i'd just re-install and archive, but the installer can't find the drive either. ugh.
suggestions?
(sometimes i miss the good old days of system 9... did i just say that out loud?)
thanks in advance.

Good morning,
I'll pretend I didn't hear the System 9 comment...
You ran your Disk Utility from the installation CD and it does see the drive? Does it correctly identify the drive size and filesystem? If it does, that is odd, it sounds like the drive has become corrupted or unreadable for some reason, possibly a bad drive, but the fact it's seeing the drive at all makes me a bit skeptical.
You might give it a try to boot into Safe Mode and see what happens, more information and instructions can be found at http://docs.info.apple.com/article.html?artnum=107392 and http://docs.info.apple.com/article.html?artnum=107393. Might not result in much, but if it boots then we can almost count out bad hardware.
Or, if the machine is under 6 months, you might give some thought to making a Genius Bar appointment and seeing if they can give you a hint or two... (Assuming the wealth of technical knowledge here on the boards can't get it fixed first.)
Let me know if it is IDing the drive properly and if the boot to Safe Mode works...
David

Error Message 3906 After Apple TV Update

Today my Apple TV updated. Once the update was complete I was no longer able to connect wirelessly. I keep getting the error message -3906. If I plug my ethernet cord into the Apple TV than everything works. The issues has to do with wireless connectivity. Any suggestions?

Welcome to the Apple Community.
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of comments? You might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

HT1600 Why won't my Apple TV update from 5.1(5201)? ...

Why won't my Apple TV update from 5.1(5201)? ...
It download the update and tries to install, but comes up with a message stating that it did not succeseed! :-(

**** auto correction... Going to wifi helped me...

Apple TV 3 looses Netflix icon after recent firmware update

I switched on my Apple TV3 last night and was prompted to upgrade to the latest firmware. I accepted. BIG MISTAKE!
After the successful upgrade, I now see only 3 rows of icons and my Netflix and Hulu icons are missing! I'm based out in Singapore but I have a VPN connection to US to allow me to watch Netflix and Hulu.
Any idea how to get this back?
I've tried resetting it and it is not working.

I had the same thing happen,
I have 2 apple id's - one for Australia and one for canada.
After the update the 'location' had changed itself from canada to australia - where netflix is not available, and the netflix icon dissapeared.
to check the location settings go to:
settings >itunes store >Location
change to a country where netflix is accessable - Hopefully your own country!
Hope this helps!

TS5150 Not spanish language sound after apple tv update

I update today march 10 of 2014 to my Apple TV and now I can't play in Netflix the second language option that in this case is Spanish. The Spanish alternative still available but don't come out any sound. This used to work and now doesn't. I tested in others that used to work and now doesn't after the update. This is very disappointment. Why this it's happening? How to fix it?
Really appreciate the help.
Thank you!

what are the items youre having problems with? have you checked to see if the problem is the same on the netflix website rto see if this is related to the appletv update or just something with netflix?
-mvimp

Overall audio quality after 2.1 update

I updated to 2.1 when it first came out and overall, the phone has performed better with fewer dropped calls. However, is it my imagination or did the audio call quality suffer? This is most noticeable when using a BT headset or receiving calls from other iPhone users. The audio is clear but has a sharp edge to it.
Has anyone else observed this?
Thanks

I also got the same problem with voice quality. My friends cannot hear my voice clearly and always ask me repeat and repeat. One more thing, iPhone3G always pick up a lot of background noise. Because I used Motorola V9 which voice quality is better iPhone3G. I hope Apple can improve the voice quality soon, otherwise I need throw it away and use V9 again...

Printing with Epson 2880 after Apple Software Update of Epson Drivers

I'm wondering if anyone else has noticed the loss of "Print Settings and Color Management" controls in the print dialogue when printing from Lightroom or Photoshop after the recent Driver Update (which appeared in Software Update.) Prior to the Update which I had been avoiding until it came down when I updated iTunes (again, Software Update) all print options were available with the Epson software. Oddly, if you elect allowing the printer to control the output the color and color settings are available but if you set the (Lightroom or Photoshop) dialogue to the paper profile then the color and color settings are grayed out. I talked at length with both Epson Tech support and went through the drill of removing and installing the printer and installing the newest drivers (from Epson) and nothing changed. I talked with Apple and again, nothing changed inspite of various adjustments. This is just a little disturbing since I do a considerable amount of photo printing.
Any thoughts or opinions would be appreciated.

I'm going to make an additional comment to my question and that is, strange as the behavior is, this may be a normal function with the update. Although during my roughly hour talk with Epson tech support, the rep was not aware and gave me reason to believe what was (not) happening in the software was in fact wrong. Clearly, the new print dialogue with it's grayed out settings is different from the previous print dialogue and print settings. If you now use a paper profile - regardless of manufacturer - the software assumes you are going to turn off color management - which is absolutely correct. Although I have not tried it, I am led to believe from some material I found deep in Epson's Support, the "color" area in the print dialogue no longer permits electing printing in "advanced" Black and White. More correctly, inorder not to have B&W grayed out you must be using glossy paper and the correct black ink cartridge is in the printer. This isn't a bad idea but sometimes I find the image is better with a Matte paper. Obviously you can, and I have, printed in B&W - you just have to be aware that within the Color settings of the print dialogue you no longer have the "option" to select B&W or advanced B&W. In some strange ways the new dialogue and settings areas of the Apple print menu for the Epson printers is simpler but it does come as a surprise when you first struggle with the changes.
Message was edited by: PeterinKY

Curve 8520 - Video quality after v5.0 update

Hello all!
Got a Curve 8520 and since updating yesterday, the frame rate when recording video has dropped significantly meaning jerky/jumpy video. It may be worth adding that even when in video camera mode but NOT recording the feed is still jumpy.
I can see the difference by watching video I recorded before the update and also by comparing to my wifes phone (exactly the same as mine) which has not had the update yet.
Any ideas or solutions would be greatly appreciated!
Thanks

You can always downgrade back to the previous OS if you like and see if the video quality returns.
Always, do a backup first, using Desktop Manager > Backup.
1. Delete the newer OS from your PC by going to Control Panel >Add/Remove Programs.
2. Then download and install the older version of the OS. BlackBerry Operating System Downloads
3. Install the older OS to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Personal video and movies no longer showing after Apple TV Update

Since I updated my Apple TV (second gen), all my personal videos seem to have vanished. This includes videos I may have created and/or digitized myself that are present in iTunes on my Mac. Now all I see are movies I purchased thorugh iTunes. I am connecting via my lcoal network to my Mac.
How do I get all my video to show again as it did with the last version of the software?

I believe it depends on licensing rights for movies which rotate from time to time. For example you can usually predict what movies are going to disappear based on their premiering (or re-premiering) on cable channels. My guess is that whatever movies you had on your wishlist probably just premiered on HBO or one of the pay cable channels. Eventually their licensing rights will expire and the movie will return to ATV.

Copy protected input after Apple TV2 update

I updated my Aplle TV2 to the latest software. Right now, I do habe a small button shown on the screen "Copy protectred input" I t shown in every menu and on every screen in Apple TV - no matter if I play a movie or something else.
I cant't get it away - What is this? And how van I make it dissapear?
Thanks a lot and sorry for my english....

This a new one. Try restarting your ATV2. If that doesn't work restore the device. Let us know if it still happen otherwise I suggest submiting a bug report to Apple directly
Here are the links
Apple TV (2nd generation): Restoring your Apple TV support.apple.com/kb/HT4367
Feedback: www.apple.com/feedback/appletv.html

Missing movies after Apple TV update

I have two Apple TVs - a 2nd gen one and a 3rd gen one. I also have about 30 movies in my iTunes movies library which, when I connect with that computer on either Apple TVs brings all the content across.
However, since the update, most of that content has vanished from the Apple TV 3rd gen. I haven't updated the 2nd gen ATV and all the content is still there when I link to the computer.
Any ideas what's happened or how I can get them to show up on my ATV3?

Welcome to the Apple Community.
I'd first check that you haven't labeled your missing content as home video and it hasn't simply been moved into this category as a result of it being introduced in the latest software.

HT1600 Downgraded Netflix quality after Apple TV update

Similar Messages

Maybe you are looking for