HT1600 keeps flashing and shows a music icon with a plug is on the screen. What do I do?
Box keeps flashing after I have waited a hour. Music icon appeared with a plug. What does that mean?
This explains it you you.
http://support.apple.com/kb/HT4053
You have to connect the iPad to your computer with the supplied cord and be running iTunes on the computer. You need the latest version of iTunes which you seem to have - but read the article.
Similar Messages
-
Why is there a iTunes icon with a USB cable on the screen after a Apple TV update
Why is there a iTunes icon with a USB cable on the screen after a Apple TV update
The iPad could be in recovery mode.
You may want to follow these instructions:
http://support.apple.com/kb/HT1808 -
Why is my ipad not showing some music icons?
why is my ipad not showing some music icons?
Like some of them do have them and some of them dont also my computer ad ipad doesnt have the same musicsalma15 wrote:
why is my ipad not showing some music icons?
You are speaking about album art I assume? Is the album art in iTunes on your computer?
Like some of them do have them and some of them dont also my computer ad ipad doesnt have the same music
Probably because all of the Music wasn't selected to sync from iTunes. When the iPad is connect to iTunes on your computer, you can select Sync Entire Library in the Music Tab of iTunes if you want all of your music on the iPad.
Take a look at this.
http://support.apple.com/kb/ht1351
this one might help as well.
http://support.apple.com/kb/PH12313 -
I just got an iPhone 4s, and want to sync some music to it, but itunes wont recognize the phone. what do i do to make the phone show up in itunes?
windows http://support.apple.com/kb/TS1538
macs http://support.apple.com/kb/TS1591 -
im updating an iphone4 and after a few minutes it shows an itunes icon with phone charger end pointing up what does this mean and what do i need to do
You are in recovery mode and need to restore in itunes on your computer.
-
I just updated my iphone 4 with iOS and now my phone will not turn back on! When i try to turn it on it shows the apple icon, then immediately shows an itunes icon with a usb plug! Help!!!
Try Here > http://support.apple.com/kb/HT1808
-
Light keeps flashing and cannot connect to ipad
The front light keeps flashing and there is no connection to my ipad - advice seems to be to restore but do I restore on the ipad - general settings and restore
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source List
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Has anyone had a problem with their iPad touchscreen not working? Mine is fully charged, keeping time, and showing me there are apps that need updates, but I can' get the touchscreen to work. I've turned it off and on several times and connected it o my laptop hoping it would "unfreeze", but nothing seems to work. Any ideas?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My iphone is not turning on, I do not know what to do. Sometimes when I put it on the charger it will flash and show the apple (like its going to turn on) then it will go black and then it will do it again. Is there anything Apple can do?
Hello Katia_Jazmin,
The article linked below provides some useful troubleshooting steps that can help get your iPhone to power on.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
My phone keeps flashing and beeping when connection to iMac via USB
my hone keeps flashing and beeping when i connect it via the USB to my new Imac
cant understand why it will not workpeterjimmyclark,
One of your USB connections may be loose/not fully inserted, or it may be a bad USB cable. It happened to me once, when a powered USB hub was not properly seated. -
My iphone 3GS keeps freezing and showing the apple logo during phone calls. Can anybody help plese ? Bja
Hiya thankyou for the answer.
Trying to set it up as a new device but can't find the backup to save it.
I have no "mediasync" folder in my library/application support. Did these folders get moved around with Lion?
Thankyou again, -
My ipod touch 4g keeps flashing the apple sign on the screen what should i do and its warranty is over to
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar -
My apple tv, when connected to the television, will only show an itunes icon with a usb cord. I don't know whay to do?
Don Sullivan wrote
"Same thing just happened to me. There was a software update available, it installed the update and then died with that visual on the screen. Reset doesn't work and it won't even show up in iTunes to try and do anything with it. I think they just bricked it on me."
Same thing just happened to me too...
I did an update a couple of days ago: and it seemed to be working fine. Just did another update today: got a flashing light, sometimes a blank screen, and sometimes the itunes logo / USB symbol... -
Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek RandallI don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.
-
IPod shows a folder icon with exclamation point after discon
Since I always ignore instruction booklets with new devices, I failed to notice the warnings with regard to configuring my iPod mini on a Windows PC. I did not install the included software first and I tried to sync with iTunes (my girlfriend already has an iPod mini so iTunes was already installed). As a result I ended up with folder exclamation point icon.
I tried the folowing already:
1) Reformatting the disk through windows explorer
2) Reset:
The folder icon with exclamtion point appears after reset
3) Running Updater 2004-04-28:
After plugging in the iPod at the prompt, the message "iPod updater can;t install firmware on connected iPod. The iPods hardware and the updater firmware are not compatible." I got the same message when doing the same thing in 'disk mode'.
4) Running the software on the disc that came with it:
When prompted I connected the iPod to the PC. I get a message "Your iPod has been connected. Please wait while the system recognises the device". And then nothing happens.
Please can anyone advise me how to fix this problem?Ok guys!! I did it!! I fixed my iPod! I want to thanks Apple for the great help they gave me (I'm being sarcastic)!
I remember that I downloaded iTunes 4.9 and the iPod updater from 2 two weeks ago on my neighbor's computer.
As this problem (IPod shows a folder icon with exclamation point when I turn it on) only happened since I upgraded iTunes to 5.0 version and iPod updater, and after one and a half day calling Apple, reading the entire web site looking for an answer, discussing with a lot of people about this problem and nothing happened, I wanted to give the last try and went to may neighbor's computer!!
I turned on the iPod updater.
When it said i had to connect my iPod I did it
Then I pressed RESTORE
After that I plug it in the A/C adapter
It worked
I connected the iPod to the computer again
iTunes worked and my iPod is working as a new one!!
Maybe you are looking for
-
T-code for getting consumptions / usage on special stock Q materials?
Hi, I am facing an issue: special stock Q is not included in all T-codes that I know for getting the consumptions / usage over a period. --> MC.9, MCBE etc.. are all not showing any results for those kind of materials. I found the explanation: it's d
-
Attachments not opening in Outlook 2013
Hi, I have recently start using Outlook 2013 on a fresh machine with a new installation. From the very first day i am not able to open any attachments from my mail (by double clicking it). Thing is, it will start working fine once i saved it in my di
-
How to pass a value from jspx page to the managed bean
hi, i have created a jspx page and manages bean with page flow scope.. in my jspx page i am searching a employee record from the data base . and getting entire employee details including 'status' as a search result. here i want to pass the value of '
-
What is the benefit for geting minimac server?
What would one use the server OS for? I pruchased the MiniMac Server, for the two 1Tb hard drives. I need to run Maverics on one, and Windows 7 on the other (for my needed PC based work software). Can one link both respective email programs together?
-
Hi! I'm new on WS and I've got a security error when I try to invoke my WS Error: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" x