HT1626 i cant control my mac the lock is not responding?

i cant control my mac the lock is not responding?

Which Lock & where?
Is this at login?

Similar Messages

  • I'm experiencing extremely slow response when attempting to open the control center from the lock screen, any suggestions?

    When trying to access the control center from the lock screen, it takes anywhere from 2 to MANY swipes to get a response.  Never opens on the first try.

    I'm not having the same problem, but there is a feature in the OS that attempts to discern from swipes to unlock and swipes to open control center. This is what you may be experiencing.

  • I have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

    i have an ipad 2 that is mounted horizontal in the wall. added the iaqualink pool control app. but the app does not have the ability to turn horizontal. is there anyway to manually turn and lock the app.??

    Yes.
    http://ipadinsight.com/ipad-basics/how-to-add-a-website-to-your-ipad-home-screen /

  • My ipad is locked and it tells me to update my icloud but the screen is not responding to my touch?

    How do I get my screen unlocked so that I can update my ipad.  The screen is not responding to my touch, instead it is telling me... " This ipad hasnt been backed up in  12 weeks. Backups happen when this ipad is plugged in, locked and connnected to wi-fi".  Does this mean that I cant use this untill it is all done backing everything up? And how do I begin to use it since it says its locked?

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    After it boots up again, you will be able to use the iPad. You should backup the iPad like the message is telling you to do.

  • ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))

    One of my clients has his dpm server turned off for a long time. Now when that server is back online I cannot re-sync backup. First was database in suspect mode and I was not able to acess dpm console. Now when I fix that I cant re-sync job. I even tried
    to delete on PG and recreate it but without success. Agent showing OK and it can comunicate with server. I have even tried to uninstall agent and re-install it but without luck.
    ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))
    That is the error what I get on all protection groups. Is there any one who can help with this?
    And last thing is that DPM is crushing on recovery tab

    Hi
    Do you still need assistance with this?

  • I am unable to open adobe bridge on my mac. When I try to open it nothing happens. When I right click it says the application is not responding. I can also not op en through photoshop. Please help

    I am unable to open adobe bridge on my mac. When I try to open it nothing happens. When I right click it says the application is not responding. I can also not op en through photoshop.

    Could you see whether Firefox will start in its Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    Here's how:
    With Firefox closed, hold down the Shift key while starting Firefox.
    A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Does that work?

  • Error 1053: The service did not respond to the start or control ...

    Dear SapService,
    I've installed a BI7.0 (ABAP only) instance on cluster with :
    windows 2003 x64 SP2
    SQL server 2005 x64 SP2
    WAS 7.00 kernel 80
    *the service runs with domain user.
    I've upgraded to kernel 114 (latest). After the upgrade the ASCS service doesn't start. It throws error:
    "Error 1053: The service did not respond to the start or control
    request in a timely fashion"
    To solve this problem I've tried:
    -go back to kernel 80 but I still get the same error.
    -start the service manually on the second node. Still same error.
    -restart the two servers and try again to start the service on the
    nodes.
    Any ideas ?
    Please advice,
    Dimitry Haritonov

    Hi,
    Check SAP Note 82751 - Problems with SAP Services & SAP Service Manager
    for some initial investigation.
    Regards,
    Siddhesh

  • When i put my Mac for sleep it takes more time than normal ( 20 secs). Sometimes, coming back from sleep the system is not responding (freeze).

    When i put my Mac for sleep it takes more time than normal (>20 secs). Sometimes, coming back from sleep the system is not responding (freeze).

    Perform SMC and NVRAM resets:
    http://support.apple.com/en-us/HT201295
    http://support.apple.com/en-us/HT204063
    The try a safe boot:
    http://support.apple.com/en-us/HT201262
    Any change?
    Ciao.

  • How to unlock a locked ipad It is locked and now i can not unlock it, the screen is not responding to my sliding the arrow to unlock. can someone suggest what should i do?

    How to unlock a locked ipad It is locked and now i can not unlock it, the screen is not responding to my sliding the arrow to unlock. can someone suggest what should i do?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht4097

  • Is it possible to lock the camera so the screen does not respond to touch?  Everything else works but camera screen seems frozen.

    My camera screen acts like it is locked.  Everything else on the phone is fine and I only have fourteen photo's on the phone, one day it worked and the next day the screen does not respond.  Have I done something?

    Hi there,
    I would recommend taking a look at some of the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Hope that helps,
    Griff W.

  • Error 2186: The service is not responding to the control function

    Every time I start the Messaging Server I get an error message. The server
    is running and no event log errors are reported. I see:
    <P>
    Could not start the <%hostname%> on <%computername%>.
    Error 2186: The service is not responding to the control function.
    <P>
    This occurs because the system does not have enough remaining memory to
    create a new desktop heap for the service being started.
    <P>
    The limit can be raised, but doing so requires changing registry entries to
    allow more but smaller desktop heaps for Windows NT services.
    The best solution is to limit the application connector instances to seven
    or less.
    <P>
    For instance, you may make a change from 0 (zero) to 1 (one):
    <P>
    HKEY_LOCAL_MACHINE
    SYSTEM
    ControlSet001
    Control
    Session Manage
    HeapDeCommitTotalFreeThreshold
    <P>
    Or press Ctrl-F to find "heap".

    Nvd,
    I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
    http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
    If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
    http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
    node=132060_US
    If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
    Jed R.
    Applications Engineer
    National Instruments

  • When I open my Mac, the screen is not bright enough.  How can I make it brighter?

    When I open my Mac, the screen is not bright enough.  How can I make it brighter?

    tjk
    It worked like a charm.  SOOOOO simple.  Duh!!!!!!
    Thanks for your help.
    nancyfromst.albert

  • Net connection trouble: "No Ethernet cable connected or the device is not responding"

    Hello
    I have been plagued by a dropping Net connection for a couple of months, and as it has been getting worse lately I have tried to sort out the problem.
    I have simplyfied my connection between the computers and the VSDL fiber modem by bypassing my AirPort Express and Ethernet hub and connecting the three computers directly to the built in ports on the modem.
    Since I did that a new error message has started appearing on my Mac Mini, saying that I have no Ethernet cable connected to the modem, or the device is not responding. At the moment I have two of the machines connected, and the Mac Book Air seems to work without problems. There are lights on the Ethernet ports on the modem, and they are lighting up for the iBook even when the Mac Mini connection drops. When the Mac Mini connection drops the lights go off on its Ethernet port on the modem.
    This seems to point to some sort of trouble with the Mac Mini. Is there a way to monitor what's going on? Can I use Terminal, for instace? It can't be the settings, and it cant' be the cable, so it must be related to the hardware I suppose. I am using DHCP to connect to the modem.
    The connection drops arbitrarily, sometimes for long periods of time, and then comes back up again by itself.
    Any ideas for trouble shooting etc?
    Best
    Hans Karlsson

    BDAqua
    Thanks again. Unfortunately, the problems are back again. Had a stable connection and connected the AirPort again. Everything was working fine. Then all of a sudden the connection dropped again today.h
    Connected a LAN cable directly to my MacBook Air and got the connection to work immediately.
    Took that cable and connected to my MacMini, again, connection came back immediately.
    The AirPort (in Brigde Mode) is also connected, but gives me a blinking orange light, and the same "no cable or (modem) is not responding" message again.
    I guess this must rule out hardware problems in the computers.
    Ligth for the LAN cable port on the modem connected to AirPort is dead. Moved the cable to another port, light still dead.
    Shut down AirPort Express, still same orange blinking light when I switched it on.
    I now suspect there is something going on with the AirPort Express. Just bought it, and I had the same problem with it's predecessor, but...
    Is there any way to trouble shoot the AirPort Express?
    I can connect to it Wirelessly, But AirPort Utility says it has been removed from the Network. In the Network Preferences it says it has a self-assigned IP. For Network Settings I get green lights for everything except Network Settings, which gives me a yellow light. It also says the Internet connetcion is working correctly.
    Indeed, when I made the direct Ethernet connection inactive I still get a working connection over WiFi, in spite of the blinking orange light on the AirPort and a yellow light for Network settings in Prefereces....
    In the console things look normal:
    8/7/12 10:04:27.269 PM Apple80211 framework[231]: 
    com.apple.message.domain: com.apple.wifi.timeout.scan
    com.apple.message.signature: Success
    com.apple.message.result: pass
    com.apple.message.value: 3149.000000
    com.apple.message.summarize: YES
    Still confused

  • FCP X locks up (not responding)

    Twice now on two different projects, once after hours of editing and just today after 30 minutes of editing, FCP X locks up (not responding), spinning beach ball, and I must force close it. When I go to reopen the program and open my project, it is completely BLANK, nothing in it.
    I have the lastest upgrade to FCP X and this has happened on both my Mac Pro desktop (Early 2009 with 10 GB of memory and plenty of HD space) as well as on my new Macbook Pro on an external drive.
    I HATE that I cannot save the file myself and that APPLE thinks I'm too stupid to do so. YES, I know I can create a whole new project, but that entails saving related files, etc. Just not as simple as a simple SAVE.
    Can anyone help me? I am not comfortable starting on a large editing project, unsure if it will lock up and I'll have to start over.

    My advice is to learn to use a new Application and get comfortable with it (working reliably) before you even contemplate starting an important project.
    FCP X is working very well for a great number of people, but it does have its quirks too.
    To be able to help you find out why you are getting crashes, you need to supply a lot more information than you already have - length of projects, what video codec you're working with, Whether your media is optimised, where your media, projects and events are stored - how the HDs are formatted etc etc.
    Don't lose heart! It's an awesome application - you just need to see why it's not working well on your system.
    Here are some of the most common ways to improve performance (you may have already addressed some of these but it's worth reading them.
    FCP X runs very well (not perfectly, by any means) on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB
    First, check the spec of your iMac against the system requirements:
    http://www.apple.com/finalcutpro/specs/
    Particularly your graphics card. If it's listed here, it's not suitable:
    http://support.apple.com/kb/HT4664
    If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
    Other ways to improve performance:
    Create optimised media.
    Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
    Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
    Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
    The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
    Andy

  • Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server.

    We are using SQL Server 2012.
    Every now and then, when we execute the below stored procedure INSERT_INTO_MYTBL, we got the below error, and it returned @ID = 0.
    "Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding. 
    This failure occured while attempting to connect to the Principle server."
    What causes this error, and how can we fix it ?
    Thank you.
    create procedure INSERT_INTO_MYTBL
    @ID int output,
    @Order varchar(50) = NULL,
    @ACCOUNT varchar(20) = NULL
    AS
    DECLARE @Success int, @TryNr int, @ErrMsg varchar(500), @ErrNumber int, @expected_id int;
    SET @Success = 0;
    SET @TryNr = 1;
    SET @ErrMsg = ''
    WHILE @Success = 0 AND @TryNr <= 3 and @ErrMsg = ''
    BEGIN;
    BEGIN TRY;
    BEGIN TRANSACTION;
    retry:
    BEGIN TRY;
    SELECT @expected_id = ident_current('myTbl') + 1
    SELECT @order = @account + '-' + CAST(@expected_id AS varchar(50))
    insert into myTbl
    ([Order],ACCOUNT)
    values
    (@Order,@ACCOUNT)
    END TRY
    BEGIN CATCH;
    SELECT @ErrNumber = ERROR_NUMBER()
    IF @ErrNumber = 2627
    BEGIN;
    GOTO retry
    END;
    ELSE
    BEGIN;
    SET @ErrMsg = '1.' + ERROR_MESSAGE() + ' ' + @order
    RAISERROR (@ErrMsg, 16, 1);
    END;
    END CATCH
    select @ID = SCOPE_IDENTITY()
    IF @id <> @expected_id
    BEGIN
    UPDATE myTbl
    SET [Order] = @ACCOUNT + '-' + CAST(@ID AS varchar(50))
    WHERE ID = @ID
    END
    SET @Success = 1
    COMMIT TRANSACTION;
    END TRY
    BEGIN CATCH;
    ROLLBACK TRANSACTION;
    SELECT @ErrNumber = ERROR_NUMBER()
    IF @ErrNumber = 1205
    BEGIN;
    SET @TryNr = @TryNr + 1;
    IF @TryNr > 3
    RAISERROR ('Giving up after 3 consecutive deadlocks for %s', 16, 1,@ACCOUNT);
    END;
    ELSE
    BEGIN;
    SET @ErrMsg = '2.' + ERROR_MESSAGE() + ' ' + @order
    RAISERROR (@ErrMsg, 16, 1);
    END;
    END CATCH;
    END;

    When the problem occurs, the stored procedure returns @ID = 0, which I think means the query
    When the problem occurs, the procedure does not return anything. SQL Server was told to stop executing. Furthermore, unless you issue the command SET XACT_ABORT ON, SQL Server will not roll back any open transaction. Which is one more reason you should not
    permit command timeouts.
    As for why this procedure sometimes take a long time, I would primarily suspect locking. When this occurs (but before the timeout elapses!), you could use my beta_lockinfo to see if there is any blocking going on. You find it here:
    http://www.sommarskog.se/sqlutil/beta_lockinfo.html
    Erland Sommarskog, SQL Server MVP, [email protected]

Maybe you are looking for