HT1645 dvd wont burn only message-error multiplexing

dvd wont burn only message-error multiplexing

Read the posts by Bengt Wärleby posts on multiplexing errors in these topics:
HT1645 I was burning a DVD and the...: Apple Support Communities
HT1583 iDVD isn't burning a DVD. It...: Apple Support Communities
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Similar Messages

New version wont load..Message Error 7 - Windows error 126

new version wont load..Message Error 7 - Windows error 126

Any update on this???? Still having the same problem.

Dvd wont burn movie all the way

The dvd is 4.7 GB and the movie is 4.1 the dvd wont burn the whole movie it stops a little before the movie is over. HOw do we burn a long movie onto dvd?

What is the total playing time of your movie? iDVD 5 has a 120 minute limit, including menus, in the Best Quality setting or a 60 minute limit in the Best Performance setting. The size of the files is not the determining factor, just the playing time.
OT

Data DVD wont burn - error message

Dear Macsters,
Everytime I try to burn a data dvd, i immediately get this message:
BURN
sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D).
It only does this when i set the burn at 1x. At 2x it burns.
I have osx 10.4.8, early g4 17" laptop, superdrive (dvd-r only).
Is this a burner problem or a software problem??
Daniel

Manually setting the burn speed on some applications can be problematic.
If it burns at 2X then my guess is thats what you need to do. Burn at 2X.
http://docs.info.apple.com/article.html?artnum=303599
Cheers Don
Oh one other thing, older burners are very picky about media.
I suggest you use the very best media, rather than bargin basement cheap media.
http://www.digitalfaq.com/media/dvdmedia.htm
Don

CD/DVD wont burn. And missing drivers.

My DVD drive stopped burning disks! I have checked the drivers and all are up2date.
And when I was checking my drivers I found some "base system devices" missing. I have upgraded from Vista 32bit to Windows 7 64bit. Any help?
My Spec.'s
Operating System System Model
Windows 7 Ultimate (x64) (build 7600)
Install Language: English (United States)
System Locale: English (United States) TOSHIBA Satellite A215 PSAFGU-058002
PIONEER DVD-RW DVR-K17LF ATA Device

Go here for information about Windows 7 upgrades. Download and run the Software Installer. Hopefully it will find any missing drivers.

Did PC Recovery and Dowloaded iTunes, wont open, only get error reports.

I just did a PC recovery and have all of my music from iTunes backed up on a dock drive. I just re-downloaded iTunes and installed it. iTunes won't open, I just get an error report every time. I clicked on the setup file and tried to repair it. I've uninstalled it and redownloaded it. Still the same result. Does anyone have any ideas on what else I could do?

does that help anyone?
dv8000 Windows XP

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

My matshita uj846 super drive wont burn dvd. get error

my super drive wont burn dvd . and i get an error : sense key medium error sense code =0x73,0x03 for cd it work fine and read dvd ok just wont burn dvd of any kind tryed differrent makes but no result .. help pls

Hi and welcome to the discussions!
Google is your friend...
I found this on a Roxio forum, but it offers the best advice I have seen anywhere about this error.
Basically, it is most likely the media or the speed you are trying to burn at. It could be a few other things, but those are the most likely culprits.

I am having trouble burning CD's and DVD's. Get the following message: error code 0x8002006E. Can any body help ?

I am having problems burning CD's and DVD's all of a sudden.
I get the following message: error code 0x8002006E. I have followed all the intsrucciones
on Helps On Line from opening spece on my start up disc to allow burning thrue to disc repair with disc utility
and the problem still persists. Can anybody help ?
isanunez

Are using the standard OSX Finder or do you have another finder application like Totalfinder?
Long discussion of this error here:-
https://discussions.apple.com/thread/1422026?start=0&tstart=0
There might be something there to help
Jerry

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

IDVD error message during Multiplexing

I'm trying to burn a project in iDVD 6. I think that my superdrive may be toast. Here is the error message:
Errors were found during the burning process
The recording device reported the media error. Power calibration area error
Multiplex error (ox73, oxo3)
There was a problem during mulitplexing/burning.
Does anyone know what would be wrong here? I can burn a data disc with no problems but when I burn to a DVD I get all sorts of problems. I never had this happen before. Any help would be greatly appreciated. Thanks!
-Chuck

Power calibration area error
This happens when your drives is doing a test burn on a portion of the disk reserved for this calibration.
When it fails, it means:
1) You have a failing drive
or
2) You have a bad blank DVD-R (or DVD+R, etc.)
or
3) You have a dirty laser lens on your drive.
Let's hope it's 2 or 3.
for 2 - Try another brand of DVD-R, I like Verbatim.
for 3 - use a CD/DVD lens cleaning disk, or another method to clean the drive. (NOTE - some users don't like these cleaning disks, and have claimed they have harmed their drives - obviously I disagree, but keep your cleaning disk as clean as possible!)
Try one of these, and then try making a data DVD from the finder. When this works OK , go back to iDVD. I always reccommend using "Save as Disk Image" and then burn the image with Disk Utility or Toast.
John B

Can't burn discs. Error message: The disc can't be burned because the device failed to calibrate the laser level for this media can't be burned because the device

Cannot burn discs. Error message: "The disc can't be burned because the device failed to calibrate the laser power level for this media". Then the blank disc is ejected.

Two main possible causes:
1. Poor media. Verbatim DVD-R work best, burned at only 2x or 4x.
2. Dirty lens. Try cleaning the superdrive with a proprietary CD/DVD lens cleaner that uses tiny brushes.

Cannot burn to DVD in iTunes 6 - unknown error occurred [261]

I'm having issues burning a playlist to DVD in iTunes 6 - it rejects the DVD and gives me an error message "The attmept to burn a disc failed. An unknown error occurred [261]." If I try to burn the same playlist to a CD, there is not a problem. In my "burning" preferences within iTunes, I have selected "Data CD or DVD", but when I pull the preferences up again, it only says "Data CD". I click this option again and it gives me "Data CD or DVD", but never seems to keep the "DVD" part of the option.
I have been able to burn to DVD from playlists in the past, but I believe it was before I upgraded to iTunes 6.
Any suggestions?
HP Pavilion 6650y Windows XP Pro

Correction: I cannot burn CDs or DVDs of playlists in iTunes 6.0.1. I have no problem burning CDs in other applications and could burn CDs prior to updating to iTunes 6.

HT1645 dvd wont burn only message-error multiplexing

Similar Messages

Maybe you are looking for