HT1651 Can i use Samsung 2GB PC-8500 DDR3 1066MHz SO-DIMM 204 Pin 2.0GB Memory Upgrade Modules M471B5673FH0-CF8 with my mac bool mid 2010?

Can i use Samsung 2GB PC-8500 DDR3 1066MHz SO-DIMM 204 Pin 2.0GB Memory Upgrade Modules M471B5673FH0-CF8 with my mac bool mid 2010?

you are out of luck, I think.
Not using the exact spec for memory wil cause trouble.
When you have the original in (1066MHz) and add another with higher speed (1333) there is a (small) chance that the higher speed one is "clocked down" and will work, but expect kernel panics often. Most of the time it will not work.
If there is no standard spec ram in at all, the mac will not start.
Luckily ram is cheap nowadays. Send it back.
The best way to buy is researching the Manufacturers' site and use the configurator, then go shopping, if you want.
Use only respected brands: Crucial, OWC, personally have not so good experience with some other brands. And remember "pennywise is poundfoulish".
I think Amazon will take it back and refund. Very unlikely that the memory is harmed. Ask them to take it back.

Similar Messages

Can a muliple OVS directories can be used when 2GB of storage is available

Hello,
My plan is to use 4 oracle virtual servers to run many guest machine, and to migrate guests from one server to another ( when needed ).
to support this, I also have an Iscsi storage with 4TeraByte of space.
I want to allocate the entire storage to be used for current guests and future ones.
My only problem is to allocate the storage. The iscsi device is visible to the 4 nodes.
On one of the nodes I tried to create a new partition on the device and make the filesystem (ocfs).
I'm using the fdisk to do the allocation, but this has a limit of <2Tera Bytes.
Do I need to have smaller partitions and create few OVS directories ? or, is there a better way to allocate the entire space ?
Thank you,
Roye

Please don't cross-post the same question in multiple forums: Re: Can a muliple OVS directories can be used when >2GB of storage is available

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

I bought my macbook pro in the US. can i use it in china? (P.S the power in the US is 110v, in China is 220v, however, the mac power supply has said: "Input: 100~240v")

i bought my macbook pro in the US. can i use it in china? (P.S the power in the US is 110v, in China is 220v, however, the mac power supply has said: "Input: 100~240v")

The Magsafe autoswitches based on detected power. You will likely need a wall adapter to alter ther US-based 3-prong to whatever is used in China.

I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?

I am from turkey and Iphone4 can be used Turkcell and vodafone(carriers) in turkey but i bought my iphone in usa and it only works with at&t.Is there anything i can do to use my iphone with turkcell or vodafone?

No. Return it and get your money back if still within the 30 day return window. All US iPhones are carrier locked and cannot be officially unlocked.

I am from argentina and i want to buy an iPhone 5s, but in my country i can only use it if the phone is unlocked , i want to know if i buy one of t mobile with no contract and i travel to mi country ( internationaly) i can use it with a sim from argentina

i am from argentina and i want to buy an iPhone 5s, but in my country i can only use it if the phone is unlocked , i want to know if i buy one of t mobile with no contract and i travel to mi country ( internationaly) i can use it with a sim from argentina

You should go onto the Tmobile web site and look around. Very soon a pop up window will ask you if you want to chat. You can try asking for someone who knows Spanish (if you prefer), they might have someone available who can chat with you in Spanish.
I give this suggestion because I remember on the Tmobile website, you can order on line, but they let you choose to pay only a little money up front, then pay off the rest over 24 months, or you can choose to pay for it in full. However, their ordering process does not say whether the paid for in full phone is going to be unlocked or not.
It may not be, You may have to make a request and say that since you have paid in full please unlock. I am not so sure that a paid for in full phone is automatically sold in unlocked state.
This is why I suggest you talk to Tmobile to get a definite answer.
Unless someone else on this forum knows for sure? Hope someone else jumps in to answer. But the best way is to ask for yourself directly from Tmobile.

I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.

Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

I have a Mac Pro (Mid 2010) I just purchased Apollo Twin but discovered that I don't have a Thunderbolt port, is there anyway I can get round this?

I have a Mac Pro (Mid 2010) I just purchased Apollo Twin and discovered I do not have a Thunderbolt port, how can I get around this?

To use ANY ThunderBolt devices, a Mac must have left the factory with a ThunderBolt port. There are no known workarounds.
Intel holds the patents and controls the chips, and they have shown NO INTEREST in any other solutions.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
How can I recover the NAS back up to put on my new Time Machine.
Talking to Apple Support Adviser was a waste of time on case number 239647273
Any thoughts or pointers?

Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

I have a Mac pro(1 free bay) and a mac mini I need to back both of them Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010) What option has the faster GB/s?

I have a Mac pro(1 free bay) and a mac mini I need to back up both of them (time machine) Is it better to use an external NAS HD or an internal hard drive on my mac pro (mid 2010)
What option has the faster GB/s?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

Can I use Samsung DIMM 8GB DDR3-1333 on my Macbook Unibody?

Hi everyone,
Can somebody please help me give me the answer to these questions? I don't have the technical understanding to figure it out myself.
I have a MacBook Unibody (soon to be with Mountain Lion) with the following specification and memory.
1. I want to upgrade my RAM to Western Digital Scorpio Black 320GB, SATA II (WD3200BEKT)
2. I want to upgrade my RAM to Samsung RAM (DIMM 8GB DDR3-1333)
So my question is whether or not my Mac would support this Harddrive & RAM. They're both cheap and have good ratings, some of review mention Macs, but I wanted to be sure.
Plus, if they are any thorough support materials regarding manual migration, references to that would be much appreciated as well!
Best,
Gabriel

The ram is not the correct spec. Your MacBook requires
RAM Type: PC3-8500 DDR3 Min. RAM Speed: 1066 MHz
Using incorrect or incompatible ram is only asking for problems.
The hard drive should work fine, but let me ask this....why not really speed things up and move to a SSD? Prices are down and it's a big upgrade over hard drives.
Complete specs for your MacBook here
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.4-alumi num-13-late-2008-unibody-specs.html

Can i use two 2gb ddr3 on my lenovo g400 ??

and can i use ddr3 and ddr2 on my lenovo g400??

hi karin99,
Welcome to Lenovo Community Forums!
According to Lenovo Tech Specs.
the Ideapad G400 can support these configurations.
highlighted is your preferred upgrade right, and it should be compatible.
Memory
Up to 16GB DDR3- 1600Mhz(Support Dual Channel)[2 SODIMM slots
one 2GB
two 2GB
one 4GB
one 2GB plus one 4GB
two 4GB
one 8GB
two 8GB
You can refer here for your Replacement / upgrade guide.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can I use samsung printer scx-4016 with macbook

can't load mac software on intel macbook.
can't find mac driver or software on samsung site.
has anyone else been able to use the multifunction printer with their intel macbook?

You can try using one of the of the Gimp-Print
drivers included with Mac OS X if you cannot locate
printer software for your specific printer model. If
your printer supports PostScript Level 2 or
PostScript Level 3, select Generic PostScript Printer
as the print model. If you are experiencing an issue
using the driver designed for your printer model, you
may be able to workaround the issue by adding the
printer via a Gimp-Print driver or the Generic
PostScript Printer Description file.
I don't understand any of what you have written about Gimp-print drivers.
This printer does not support postScript. Could you please give me more detailed instructions about what I should do.
Sorry it has taken me this long to get back to this problem, but regular life got in the way to handling this until now. I have to copy everything I want to print to my windows machine from my macbook. I am very frustrated with it.
Samsung is no help and only lists win or linux drivers.

Can I use my late 2013 Macbook pro as a display for my xbox one. I am currently sick with the flu and I do not have a tv in my room. Is there anyway to use the hdmi port on my mac and connect it to the xbox one?

I am currently sick with the flu and in my room I dont have a tv. I tried plugging my xbox one's hdmi into the hdmi port on my macbook pro late 2013 retina display. I even tried connecting the hdmi cable to a hdmi mini display mort converter and that didnt work. How can I use my Macbook as a monitor to play game on

I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

I can't use my password to open icloud. I changed my apple password and it still won't work with icloud

I can't use my apple password to open icloud. I changed my apple password and still can't open icloud on my pc. What can I do or what am I doing wrong.
Thanks

Sorry to ask but... are you absolutely certain you have entered your Apple ID and account password correctly?
If you use the same Apple ID for iCloud and the iTunes store, see if you are able to log into the iTunes store from either your computer or your iPod.

HT1651 Can i use Samsung 2GB PC-8500 DDR3 1066MHz SO-DIMM 204 Pin 2.0GB Memory Upgrade Modules M471B5673FH0-CF8 with my mac bool mid 2010?

Similar Messages

Maybe you are looking for