HT1657 My movies are not transferring from my computer to my iphone 5.

I downloaded 3 movies on my computer and want to transfer them to my iphone 5.  I have my phone connected to my computer and go into my itunes account, then under movie rentals, I move them to the phone side from my computer.  Everytime I do this they go back to my computer.  What am I doing wrong?
Thanks,

Probably because the iOS and Mac versions of the game are not compatible since they run on completely different operating systems.  You would have to contact the app developer to confirm this.

Similar Messages

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

    Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

    Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

  • How do I delete pictures transferred from my computer onto my iphone?

    How do I delete pictures transferred from my computer onto my iphone?

    You delete them the same way they got there, through the iTunes sync process. Deselect what you don't want on your phone under the photos tab, then hit the apply/sync button.

  • How do I delete pics from my iPhone that I have transferred from my computer to my iPhone?

    please help me! How do I delete pics from my iPhone that I have transferred from my computer to my iPhone?

    I guess you transfered them via iTunes Snyc?
    If yes you have to delete them on your computer and sync again with your iPhone

  • Why are some of my group contacts not transferring from my computer

    Why are some of my group contacts not transferring from my computer

    Hey, I see I'm having the same problem lately.  I keep entering new contacts to my Apple desktop, and ever since adopting Lion the new contacts refuse to transfer to my mobile devices!  (no matter what I try!)...so much for having my contacts always updated with me!

  • Hi I originally had my itunes on an old computer, but now I put it on a new computer. My iphone 4s still has pictures on it that were synched from the old computer, but are not on my new computer. My iphone will not let me delete them.

    Hi my iphone 4s still has pictures on it from my old computer. I recently put my itunes on a new computer and the old photos albums can not be deleted off my iphone. It is taking up too much room and I want them off. How do i get rid of them if they are not on my new computer?

    Yes.  You can import those current pics on your phone to your computer http://support.apple.com/kb/HT4083
    then you can sync it back to your phone http://support.apple.com/kb/HT4236
    If you don't want to do this, then you will have to live with those sync pics on yoru phone.

  • Item text and item note are not transfering from SRM to ECC on to PR

    Hello Expers!!!
    Due to some requirement we added some logic in BBP_CREATE_BE_RQ_NEW to print the used ID of the shopping cart creator on PR under item text requisitioner tab. but after moving these changes to production the item text(Vendor text) and item note(internal note) which are maintained in the shopping cart are not printing on the Purchase requisition under item text and item note tabs. these two texts were printing correctly before moving our changes.
    please suggest me how this item note and item text will print on PR. Is it a standard functionlity in SRM 5.0?
    is this because of move over changes?
    suggest me to resolve the issue....
    thanks in advance...
    Regards,
    CD Reddy

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Messages are not transferring from PI to SRM

    Hi,
    Here the  land scape is ECC -PI-SRM, The messages transfer to ECC TO PI, But  messages not transfer  from  PI-SRM ,the scenarios  are Idoc-idoc & Idoc -proxy ,Here  all RFC  connections are working  fine, . In SRM side - T-code  sldcheck  getting the error -  function call  returned  exception code  3, and in SPROXY  T-CODE -  ESR  components are  not displaying, could please provide help .
    Regards,
    seetharam.

    Hi M Joshi ,
    Please check the below :
    1) One RFC of type H to point to PI with all the details.
    2) Define the role of the business system in the server that you want to see(Sxmb_Adm)
    3)Connection between Business System and System Landscape Directory.
    3a)RFC destination LCRSAPRFC of type T for SLD connection.
    3b)RFC destination SAPSLDAPI of type T for SLD connection.
    4)Maintain the SAP J2EE Connection parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE Engine
    5)Maintain SLD access details in Transaction SLDAPICUST.
    Please refer the section 1.3.1, 1.3.2, 1.3.3 and 1.3.4 in the document(as linked provided below)
    SLDAPICUST should point to the SLD host server. If you have a central SLD installed on the Dev server, then it is ok that it is using the host and port of the Dev server.
    PIAPPLUSER is the normal user that is used in trx SLDAPICUST (the user must have the role SAP_XI_APPL_SERV_USER).
    'Lastly, will the gateway Server of SAPSLDAPI and LCRSAPRFC will be the same for both DEV and QAs systems in XI?'
    For proxy configuration, refer the following link:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?QuickLink=index&overridelayout=true
    you can also check the assignment between the Business System , technical system and the software component versions in the SLD.A object would only be visible in the SPROXY of an Applicaion system if the corresponding SCWV is installed on the business system.
    To add :
    Go to the landscape view in the SLD.
    Select the Technical System Link
    Search your Technical system as Application system
    Click on the same
    A  tabbed screen appears in the bottom.
    Go to installed software tab.
    Click ADD NEW PRODUCT
    Add your product here. 
    Also check the business System assignment in the similar way.

  • All my songs and pictures are not transferring from my old phone !!!!!!

    I had the iphone 4S and yesterday I went and got the iphone 5. I am trying to transfer everything using my icloud. All my apps,notes,txt msgs,contacts... everything like that was added onto my new phone. My pictures & music however, are still all adding, it has been loading since last night, this morning I noticed that it has stopped loading on this one song, and this one picture ( I have ALOT of pictures & music) so when I go into my photo app is says " downloading 2,027 of 2,984 " and it hasnt changed for hours!!! Same with my music I go into itunes and it says I have 26 songs left to download and they are not loading, they all say " waiting..." below them!!!
    What should I do ? ..or will it EVENTUALLY load. I must have enough space on this new phone because I did on my old one....and I have deleted quite a few apps that were added from my old phone to my new one.
    Pleasssseeeeeee HELP, thankkkssss (:

    Check what steps you have taken against this
    http://support.apple.com/kb/ht2109
    After that time I suspect it has "frozen "
    Start again having checked out above

  • IPAD2 since yesterday seems to have stopped allowing transfers of photos from anything other than another Apple product and comes up with the message2 itunes will no longer sync photos....which are not transferred from a Mac? Looks as if there is a prob

    IPAD2 since yesterday seems to have stopped transfers of photos from non Mac equipment. I use dell with ITunes cloud facility.
    Any ideas or are we to await Mac correcting the software?

    Okay, can someone please give a useful answer? Thanks! I have been experiencing exactly the same problem for some time now, and it is very annoying. Furthermore, I would like to point out to Chris CA that there is absolutely nothing ambiguous about the original post.
    So here is the deal. I used to be able to burn CDs with iTunes that played back fine on both my car and home stereo. After some update, and I am very sorry but I really do not remember which one, as I am just a user and not a programmer and just want something that works, which in the end Apple used to be all about, and therefore do not keep track of all the updates, CDs won't play back on my car stereo. Nothing else changed, still the same brand of CDs (even the same stack!), still the same car stereo, and still the same 2007 MBP. So by simple deduction I conclude it must be a software update. And I do not care what the exact cause is, I just want a fix!
    I'd like to apologize for my tone in the above, but it is just a very annoying problem, even more so because it seems nothing is being done about it. Thanks for your answer in advance!

  • Free goods are not transferred from ECC to GTS correctly

    Hello All,
    We  have a proforma invoice with multiple items with one of the item as a free goods item ( item category TANN). We are encountering the following issues when this proforma invoice transferred to GTS,
    1. The "Free of Charge" check box is not selected for the TANN item in GTS  (in the line item "Cust.Value" tab)
    2. The currency field for the "Value of Goods", "Value for Foreign Trade Statistics (Statistical Value)" is not populated at line item
    3. The currency field for the "Value of Goods" is not populated at header level ( Logistics Costs tab)
    4. Amount field is not populated for "Value for Foreign Trade Statistics (Statistical Value)"  at line item.
    Am I missing any configuration in GTS?
    Thanks,
    Venkat

    Hi Venkat,
    There is nothing wrong in GTS.  I think the configuration problem is in your ERP system.  The "free-of-charge" indicator is set if:
    - there is a Statistical Value but no Net Value, OR
    - there is no Net Value but the Foreign Trade data is missing.
    You should make sure that your TANN Item Category is configured with Pricing Type 'B' (pricing for free goods), and receiving 100% discount on the standard price.  In that way, a positive Statistical Value should be determined, and the FoC indicator will follow the first rule above.
    Best regards,
    Dave

  • My photos are not transferring from the cloud to my new phone

    I bought a iPhone 5s when transferring my old photos from the cloud. Only 16 of the photos transferred to the new phone, the rest of them just say downloading. How do I get the rest of my photos? 

    If it appears to not be making any progress even though you have a strong wifi signal, sometimes turning the phone off, then back on will get things going again.  Otherwise about all you can do is try restoring the backup again.  If you still have the old phone, you could also try creating an iTunes backup, then restoring that backup to your new phone.

  • Some purchased songs are not transferring from itunes to ipod even others from the same album did.

    Originally the songs were only partially downloaded. After completing the downloads to itunes it was suggested to de authorize the computer and then authorize the computer. Still unable to transfer to classic ipod. Even tried resetting ipod.
    Any suggestions?

    yeah, a little box comes up that says "the file ------ is not supported by the ipod" or some blah like that, and then theres this little button with a plus sign that you can click on and right next to it says 'see 181 total problems" and then it gives you a list of the things that didnt transfer. other than that, everything is fine.(well except for the fact that my music isnt transferring, of course.) its kinda new-ish, i got it in july, and its worked fine until now.
    ??   Windows XP  

  • My reacently bought songs are not transfering from imy ipod touch to my itunes on the computer? can anyone help?

    soo i just reacently bought some new songs from itunes on my old ipod touch. And now i would like to get those songs on to my new ipod touch but they will not sycn to my itunes on my computer so i can get them on to my ipod. all the older songs i bought synced perfectly but the new songs woun't vany help?

    open itunes, connect ipod, click File>Transfer Purchases

Maybe you are looking for

  • ISE Guest - Change Password Option

    Hi All Can anyone confirm that the change password option on the Guest Self Registration Portal actually works? I have enabled the options with the ISE Guest Portal to allow the Guest to create his own account and also to change his password. Althoug

  • GRAC_ROLE_MASS_IMPRT : roles not getting imported

    Hi Friends, I am working on GRC AC migration from AC 5.3 to 10.1 Currently I am importing the Data from backend systems. While performing intra-migration tasks before RAR data import, I am stuck at below step : Importing roles for defined connectors

  • How Can I use EZDrummer in Audition CS6?

    Hello, I´m Trying to use Toontrack´s EZDrummer in AU, in AU 3 I only add a Midi track and after that I select DFHSampler (EZDrummer) in a Piano Roll, but I can´t do this in AU CS6, How Can I use EZDrummer? is a Virtual Studio Instrument (VSTi)

  • Essentials R2 licensing and having more than one VM

    My understanding with Windows Server 2012 Essentials R2 is that the licensing has changed, so that we can install WS2012 R2 with only Hyper-V role on the host AND WS2012E R2 as a VM. However, I just ran into someone who believes that this is the only

  • A error ocourred (0xe8000065) what dos that mean and how can i fix it?

    a error ocourred (0xe8000065) what dos that mean and how can i fix it?