HT1657 What are the steps in watching a rental that was purchased and downloaded to your iphone 4?
What are the steps in watching a rental that was purchased and downloaded to your iphone 4? or to watch on a home laptop?
In order to watch it, just start playing it - if you've downloaded or synced it to your iPhone then it should be in the Videos app, or if it's on your computer's iTunes then it should be in the Movies section of your library. You have 30 days to start watching it from when you rent it, and once you start watching it you then have 48 hours (24 hours in the US) to finish watching it. As long as the film has been fully downloaded downloaded then you should be able to watch it without being online.
There is a FAQ page about rentals here : http://support.apple.com/kb/HT1657
Similar Messages
-
What are the steps to uninstall Creative Cloud on a Mac and create a brand new re-install
I am having problems with my Mac OS system disk and have decided to re-format the disk and start again.
However I have noted numerous members who have removed Creative Cloud products only to find when they wish to re-install being informed that the software is already on their disk.
Therefore, what I need to know, is what exactly is the procedure that will allow me to erase my disk, re-build it and then download a new copy set of the Creative Cloud software?
I don't want, when I have rebuilt the hard disk, to be faced with the statement that I already have Creative cloud on my disk ... when in fact I have erased it.
Thank you.
James.You want to do two things:
Deactivate the installed programs via the Help menu.
Uninstall the programs from the links provided in the folder Applications > Utilities > Adobe Installers. -
What are the steps to optimise ABAP code
What are the steps to optimise ABAP code, that is how to increase the performance of a code?
Hi
Welcome to SDN forum
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
<b>Reward points for useful Answers</b>
Regards
Anji -
I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?
Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(116042) -
How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?There is no such thing as an unlock code. Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
iPhone: About unlocking -
How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?
Try TransPhone, it's working fine, but a bit expensive...
After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
I may receive some form of compensation, financial or otherwise, from my recommendation or link
<Edited by Host> -
What are the steps would liket take using AR,AP,GL Datasource in R/3
Hi,
When i would like to use SAP content data source Like ,AR,AP,GL
data source what are all the master data need to activate for this.
Ex: for AR we need to activate the Customer master data
what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.<i>What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.</i>
Find out what Cubes, ODS's will be used - > HELP.SAP using the datasource.
Activate transaction datasources.
See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
Install content on BI side.
It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
<i>What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.</i>
Infosource Overview -
What are the steps need to be taken care for MM data sources while extrac
what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
RachaHi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328] -
What are the steps for loading master data
Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
EvionHi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S -
I wrote an install program (.exe) that is downloaded from a website. When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory. When I run, the installed program works.
What are the steps to make it seamless for a customer to use the install program and then use the installed program?
bhs67This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer.
Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield." Where do I find info that describes the differences between the "free" and the "full"
versions?
bhs67
Hello,
The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
In addition, as this thread
InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
at the following forum to get supports about InstallShield.
http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
What are the steps needs to be perform to define a data model
What are the steps needs to be perform to define a data model
a. Information Gathering
b. Hardware & Software
c. Structure the Information MDM
d. Transfer into a Physical Model BW data model
e. Explore use of existing model Business ContentHi Siva,
Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.
<u><b>
Project Preparation</b></u>
Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
<u><b>Blue Print</b></u>
Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
<u><b>Realization Phase</b></u>
Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
<u><b>Testing</b></u>
Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
<u><b>Go live</b></u>
Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after it will be transitoned to support team.
Hope It helps you.
Assign Points if it usefull
Regards
Sujan -
Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
AyeshaThanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha -
What are the steps to change the name on the "House" in the side bar on OSX Mavericks?
What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?
You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root -
hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india
Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.
-
I have a credit in my itunes account, but when I click on "redeem" it asks me to enter a gift card or download code. what are the steps to go in and be able to redeem the credit I have? If I go to an album that I want to use my credit on, the only choice I am seeing is to use the credit card on file. Help!
It says at the top under Redeem after I touched that:
$14.73
Account: [email protected] (my account name)
Enter your Gift Card or Download Coad
Maybe you are looking for
-
How to specify custom page size in points?
Have done the usual searches and not hit anything. Has anyone worked out how to get the custom sizes in Print Setup- to be measured in Points? I have a job where I need to work to screen resolution. The two System choices are for Metric which oddly s
-
Mail with Yosemite OS doesn't work fully with Hotmail IMAP
First of all my question: How do I set up Mail properly in Yosemite OS so it works fully with Hotmail IMAP? My problem: I can receive and send mails through the hotmail IMAP account but I am not able to search inside mail content, mail headers or any
-
when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours
-
Duplicate contacts after upgrading?
I started from a Mac Power Book running Snow Leopard - too old to upgrade to Mountain Lion and afirst generation iPad Not at all sure how either of those worked wo\ith iCloud I switched to a MacMini on Mountain Lion and also from an iPhine
-
Bring back Initial View consistant capability
I create documents in Acrobat where people click on links and go back and forth between two documents. I have my Initial View set on Bookmark Panel and Page, but when you click to the second document then return, the document has lost focus and now