HT1665 Can I use my iPhone plug in charger, to charge my iPad?

Can I use my iPhone plug in charger to charge my iPad ?

Yes, but it won't charge very quickly sinc the iPhone charger is 5W versus the 10/12W iPad charger.

Similar Messages

  • Can i use my iPhone as a hot spot for my iPad 2

    Can I use my iphone as a hot spot for my ipad 2?

    Yes, so long as your iPhone has the personal hotspot service enabled.

  • Can I use my iPhone to have internet access on the iPad?

    Can I use my iPhone to have internet access on the iPad?

    Yes, but you have to have your phone set up for tethering. Depending on your carrier that might require a special plan.

  • I recently bought an iPad. Can I use the USB plug in charger to charge my iPod shuffle?

    I recently bought an iPad. Can I use the wall plug in USB charger for the iPad for my iPod shuffle?

    Yes.

  • Can i use my iphone while its charging for the first time

    i just got the iphone 6. when i turned it on for the first time it had like half battery, i let it fully die and now im charging it for the first time. can i use it while its charging? every phone ive ever had had such a crappy battery life. i wanna finally have a good battery! lol

    Anson Luk wrote:
    Hi. Sure, you can use your iPhone when charging (but not always) . Just release your battery under 10% and recharge to 100% once a month, it can be helpful for battery life.
    That is actually not considered best practice. Lithium ion batteries should be kept topped up when possible. That was previously recommended to calibrate the battery sensor. It never had any effect on the overall life of the battery.

  • Can I use my iphone as a hotspot for the new ipad thru Verizon?

    I currently own an iphone and have service thru Verizon.  Would like to purchase the new ipad.  I didn't know if I needed to spend the extra money for the wi-fi-4g cellular (verizon) and have to pay for the service monthly or could I use my iphone as my hotspot?  Any advise would be great!   Thanks!

    Verizon does offer Personal Hotspot (aka "tethering") for the iPhone. You will have pay extra for the service. Contact Verizon to get pricing.
    Regards.

  • HT1665 Can I use my iPhone charger to charge my iPad?

    Instead of carrying the separate charger for my iPad and my iPhone, and I just use my iPhone5 charger for both?

    Yes, you can. But it will take significantly longer. Better option is to carry your iPad charger and use it for both devices.

  • HT1665 Can I use a 10 W USB power adapter from an IPad to charge an iPhone 5s.

    I have 10 W. USB power adapter that I bought for my iPad. Can I plug my iPhone 5s into it to charge?  I see that the adapter that comes with the 5s is listed at 5 watts.

    volts are pushed amps are drawn
    if a charger provide the 5volts ios devices were meant to be charged by it does not matter
    if it can provide 1000 amps making it a 5000W device because of ohms law which state W = Amps * Volts

  • Can I use old iPhone 4.3.3 backup for new iPad 6.1.3 to recover lost contacts?

    I lost all Contacts from iPhone 4 iOS 4.3.3 when I accidentally deleted my old MobileMe email account. (Never upgraded to 5.0+). Can I sync or restore a new iPad mini 6.1.3 using an old iPhone backup through iTunes to retrieve my Contacts? Is there other way?  Not on iCloud. Don't wanna restore my iPhone & lose all its data since last backup. Thank you.

    Go to Settings>iCloud>Storage & Backup and confirm that the backup completed successfully.  If wi was it will say "Last Backup:" with a date and/or time at the very bottom under the "Back Up Now" button.  After confirming this, do the following:
    Restore your iPhone backup to your iPad Mini by connecting the iPad Mini to your computer, open iTunes, click on the name of your iPad Mini in iTunes, go to the Summary tab of your iTunes sync settings and click on Restore Backup.  Watch the progress bar at the top of iTunes and allow the restore process to complete.  When it's done, eject it from iTunes and disconnect it from your computer.
    Check the contacts and calendar on your iPad Mini to confirm that the they was successfully restored.  Assuming they were, go to Settings>iCloud, turn Contacts and Calendars to On (if they aren't already on), and choose Merge when prompted to upload the data to your account.
    Go to icloud.com from your computer, sign into your iCloud account and check your contacts and calendar to confirm that they were both successfully uploaded.
    Restore your iCloud backup by going to Settings>General>Reset and tapping Erase All Content and Settings.  Then go through the setup screens on your iPad Mini and when given the option, choose Restore from iCloud Backup.  Sign into your iCloud account, agree to the terms and conditions, then choose your most recent backup to restore to.  Be sure your iPad Mini is connected to wifi and your charger as this may take some time to finish.  After restoring your data and settings, it will restart and begin to download your apps and other purchased media.  During this process you will be prompted enter the passwords for the Apple ID(s) used to purchase this media.
    When it's done restoring our iCloud backup, go to Settings>iCloud, confirm that you are signed into your iCloud account and turn Contacts and Calendars to On (if they aren't already on).  Your recovered contacts and calendar should then reappear on it.

  • How can i use my iphone with more than one itunes

    how can i use my iphone with more than one itunes

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • HT1386 Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. J

    Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
    Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
    However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
    <Edited By Host>

    Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?

  • Can I use the iPhone when is he charging?

    Can I use the iPhone when is he charging?

    Andy, I'd like to know where you got that information, [citation/source needed]
    Whenver you see the plug symbol on the iPhone, it means its running on external power.
    Some datacenters use this method/always-on UPS, (AC power charges the battery bank, datacenter is connected to the other end of the battery) If there is any interruption in mainline power, the system stays up while the generator warms up.
    Do they have any battery degradation issues? Nope.
    Apple designed the iPhone to handle multiple methods of charging and discharging events.
    Remember, when new on the forums, whenever/wherever you post, people are trusting the information you provide, if its inaccurate, out-of-date, etc, you might want to do some research and learning about new technology.

  • HT1386 I can't use my iphone after upgrading to IOS5

    Can someone help?  I can't use my iphone 3gs after upgrading to ios5.

    I have iphone 3 GS.  I upgraded the software to ios 5 and the phone is now can't be accessed.  All I can see is the Gray screen says Iphone.  It ask me to set it up, choose your country, wifi, etc.  when I did that, it always stop at the page where it says "Apple activation server is down, please try it again".  Tried so many times but the same messages kept showing up.  Connect it to Itunes, itunes said there is no sim card installed.  I went to AT&T to get the new simcard and it still saying the same thing.  don't know what's wrong with it.

  • Can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

    can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

    Yes, you can have as many devices - iPhones, iPods, iPads - as you like using the same iTunes account.

  • How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

    How can I use 2 iPhone 4's on same iTunes account, but NOT sync same contacts?

    They need to be registered under different Apple ID's.  The initial Apple ID is set when you first start the phone up.  If you've already registered the phone to the iTunes account, back it up to your computer, and then have iTunes do a factory reset.  Go to www.icloud.com, log in with your current Apple ID, select "Find My iPhone," choose the iPhone you want to dissociate from your primary Apple ID from the upper left, and then click the little circled X ("remove").
    When you start the phone, it will have you go through the setup process again, at which time you need to create a unique Apple ID for the device.  You can then restore it from your iTunes backup to get back your apps and other settings.
    Whenever you use the iTunes store, use the login information (Apple ID and password) that you were using before.  Basically, the second Apple ID that you created is purely used for accessing iCloud services, which includes synchronization of contacts, iCal events, and other such things.

Maybe you are looking for

  • How to use system date and time

    Hi i am using mysql database. my code is import javax.servlet.*; import javax.servlet.http.*; import javax.servlet.http.HttpSession.*; import java.io.*; import java.sql.*; public class TaskA extends HttpServlet   public void doPost(HttpServletRequest

  • Tomahawk pannelTabbedPane tag

    Hi, I am trying to make a simple tab page. My code is.. <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%> <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%> <%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%> <html> <hea

  • Sidebar favourites start to point at wrong drive randomly and I have no idea why?

    I have 3 firewire drives connected to my iMac, "Media Drive", "Media Drive Mirror" and "Media Drive Mirror 2". Media Drive is my primary work drive and the other two are mirrored backups. I have links to my working directories on the primary drive in

  • Show dynamic columns in ALV table

    I have a question that i need to create report in ALV like this ... i need to select doc date e.g. from 03.11.2007 to 05.02.2008 and the report is expected to show like this SO#   |  cust |  sales gp | 2007-11 order amt | 2007-12 order amt | 2008-01

  • Write results to report file once per minute

    Hello All, If I understand correctly, the standard setup for report creation is to save all results to the report at the end of the test. I am running a Teststand script over several days, there is a chance power could be lost or the machine could fa