HT1665 USB Wall charger

Please advise, if a USB wall charger itself should be certified by "Made for iPhone"?
Is there any compatibility issue in case of use any USB wall charger (output: 5V / 1A), by an "iPhone" original cable (USB to lightning connector)?
Thanks in advance,
Shmulik

Thankd Allan,
The question is if Apple also mark / certify a stand alone USB wall charger (without the cable)
with "Made for iPhone" as with other accessories?
Thanks in advance,
Shmulik.

Similar Messages

  • Can I charge my ipod classic in Germany with the same usb wall charger I use in the USA, by plugging it directly into the correct adapter plug? Or do I need a power converter/transformer?

    I will be in Germany for a year. I want to take my ipod classic and charge it with a usb wall charger, like I do here in the USA. Can I simply use the correct wall adapter plug for Germany, or must I use a power converter/transformer in between?

    It should work as long as the prongs adapter are adapted to the outlet configuration.
    From http://manuals.info.apple.com/MANUALS/0/MA188/en_US/iPod_2ndGen_USB_Power_Adapte r-EN.pdf
    Specifications  Input: AC 100-240 volts (V), 50/60 hertz (Hz)  Output: DC 5V, 1 A

  • IP4 Charging..USB to PC (MAC) vs USB Wall Charger??

    Could there be a difference in the way the battery is recharged when charging the IP4 using a USB cable connected to a USB dock, which is connected to a Mac Mini vs charging the phone using the USB wall charger?
    Couple days ago my IP4 battery drained normally, indicator went red since it was less that 20% capacity, so I plugged it into a USB cable that I had been using to charge my IP 3G. That cable goes to a USB dock connected to my Mini, my 3G always seemed to charge fine using same calbe...seems the IP4 charged ok as well...though it did seem to take longer for a full charge. I briefly used the phone that evening. When I went to bed, battery was at about 90% charged, almost full charge. Next morning, it was down below 20%. Charged it again next day using USB wall charger, used the phone more last night, but phone was close to 90% available this morning.
    I don't believe the previous evening I ran any wacky app or process that could have been running overnight, I checked that first, same few apps I normally used showed.
    So, does how the IP4 get charged, USB to PC vs USB to wall outlet make a difference in how the battery charges?

    it will take longer to charge on a computer because there is less power going to the phone thats just the way it works
    however no matter where you charge it and how long it takes to charge its not going to deplete quicker based on one source or another there must have been something that drained your battery

  • Nokia Lumia USB wall charger to charge iPod touch

    Can I use the Nokia lumia 800 USB wall charger to charge my iPod touch? It is written there 5V 1A and I hope it is alright to use it for my iPod touch 4g

    It will work fine for the iPod.

  • Charging Microphoto with USB wall charger - what specifications are need

    What specifications are required on an USB wall charger for it to work with the MIcrophoto Will the cell phone USB chargers do the job? Thanks!

    Is it a problem with the charger or the phone?
    Try a different charger. If the problem persists, it's the phone. This is not the typical iPhone experience and I hope you will have a good one when the issue gets resolved

  • USB wall charging for ipod

    Apple wall charger is too much costly so if u have an existing USB wall charger for ur camera or ur phone, use it to charge ur ipod.
    Make sure that the output ampere rating is min 1A.
    But if u have to buy one buy other makes like Phillips only for $7.
    I am using my Kodak camera charger with the OEM usb dock connector......no problrm at all.
    Save & donate for charity.

    - While charging try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try restoring the iPod via iTunes.  First from backup and if still problem restore to factory defaults/new iPod.
    - However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  If defective Apple should give you a refurbished iPod.

  • Apple USB wall charger

    I have a Apple USB wall charger that says: Input 100-240v. Does that mean I can put this charger in in wall plug that is 230v and charge my iPod without having to worry about converting the voltage.

    Yes, but you will need an adapter for the plug as the plug for 230V is different than the one for 117V.

  • Nexxtech USB Wall Charger compatible with Zen Vision

    I was wondering if the?Nexxtech USB Wall Charger (http://http://www.circuitcity.com/ss...oductDetail.do) would work with the Zen Vision M. I'm going on a trip this week and need a cheap wall charger (less than $20)?that I can go to the store and get it (no online orders). Thanks,
    Drake

    hey thanks for the fast reply!
    that sounds good. one more qs:
    is there a cable available that allows to sync & charge directly from player to usb without using the little dongle attachment thingy. I find it ridiculous that Creative went with a propriety connection! I don't fancy lugging that around everywhere...
    thanksMessage Edited by jayneemac on 0-2-200705:00 PM

  • Can I use a regular USB wall charger to charge my Sixaxis controller?

    Hi. I have a Sixaxis controller and I'm wondering if I could charge it using a USB wall charger like the ones that come with smartphones. I want to charge my controller but I have the PS3 plugged into an extension cable with my TV, set-top box and DVD player. In order to charge my controller atm I have to have all those things turned on and it's expensive and somewhat dangerous. So, can I use my phone's USB wall charger to charge my Sixaxis controller?  Thanks.

    Thanks. I just didn't want it to explode or something.

  • Ipod touch 3g won't charge through usb wall charger

    all of a sudden, my ipod touch won't charge through the wall charger i have that i always use, but i can charge from my laptop usb port, does anyone know why, cause the wall charger is broken and im getting a new one, and it doesn't work, do i need to send it to apple to get it fix?

    The ipod touch 3rd gen has to have a specific type of wall charger to work, go to http://www.thinkgeek.com/computing/usb-gadgets/b43f/ this little device will fix your problem right up! it costs less than a new wall charger too!

  • Creative Zen 16GB with iPod USB wall charg

    I have a wall charger my wife uses for her iPod. Can I use this to charge my Creative Zen 6GB, or will it burn it out?

    It shouldn't burn it out unless there is some sort of major diviation in wiring?from the USB standard. I couldn't imagine Creative or Apple doing such a foolish thing. Best thing to probably do is to give it a try. It should either charge or not charge. All USB should be nominally 5V @400-500 mAh, the AC adapters often deli'ver higher current to enable faster charging. More current won't hurt, the player will only use what it needs.

  • USB WALL CHARGER FOR FUZE AND CLIP

    What kind of wall charger do I need to charge my Fuze and Clip?  I think I read it was a 5 volt charger.  I found one on Amazon, but was unable to post the link for some reason, and it didn't state the voltage. It was just a wall wart with a USB cable (actually don't need the cable)  Can someone help me out please...don't want to fry my mp3 players!  If possible, please post a link to the one I need.  Thanks.

    The chargers are multi-voltage capable. You will simply need a plug adapter for the outlets in India.

  • Quad USB wall charger?

    Hi,
    We're looking for a charger that we can plug 2 iPhones and 2 iPods into to charge up.
    We'll just use our cables, no computer connectivity needed.
    Any recommendations are really appreciated.
    Thanks,
    Andrew

    The chargers are multi-voltage capable. You will simply need a plug adapter for the outlets in India.

  • Using USB Wall Outlet to Charge iPad

    I was wondering if any harm can be cause by using a reputable brand USB wall charger.  In other words, instead of using the 10 watt Apple charging brick with the lightening cable, using the lightening cable and plugging it directly into the USB wall charger (i.e., bypassing the Apple charging brick).  It seems like it may charge faster using the wall outlet directly, but wouldn't want to risk charing the iPad in this manner if potential harm could be cause. 

    You should have no issue if you stick with reputable company like Skydiver119 mentions. Also, be sure that the aftermarket charger is rated for the same output (look at the watts ratings here) as the Apple charger or higher.
    It's also worth noting that using an aftermarket charger of the same wattage output as the Apple charger likely will not charge the device any faster or slower. Certainly not anything you'd notice.
    Also, moving to a higher wattage charger (10 watt vs 12 watt) is fine but don't expect any noticeable vast increase in charging speed...I supposed you'd notice if you did a timed test between the two but otherwise, don't expect miracles.

  • Faulty UK USB Power Brick/Wall Charger Drains iPhone Battery

    I'm writing this post more from an informative perspective, rather than from a question seeking a response.
    I have a genuine Apple UK USB wall charger which is at least 2 years old - it either came with my current iPhone 5 or old iPhone 4 from 4 years ago (both look identical).
    Recently on charging my phone overnight, I've woken up (late - as the alarm consequently didn't work) to find that the power had drained from my phone rather than the expected charge happening. Having an old phone, I assumed it was the fault of the phone and booked it in for a genius bar visit. Being annoyed about the 1 week+ delay for the next genius bar appointment, I purchased a new iPhone to use temporarily for a week which would then be returned for a full refund on receipt of a replacement for mine.
    On testing out the brand new iPhone with the charger, it appears that the same happens:
    On plugging in the new phone to the charger once it has been fully charged (100%), within 5 minutes the charge in the phone has become 97%.
    I'm guessing it is quite unusual for a USB brick to fail in this way - to actually drain the phone of charge?

    I have the dock connector option for my factory stereo as well and am also seeing it drain the iPhone battery. What's odd is that it used to charge just fine.
    Initially the iPhone wouldn't route audio through the dock connector in my vehicle. It would see that it was plugged in and gave the Airplane Mode prompt, but would only play audio from its internal speaker. It did, however, charge as expected. Then the iPhone software update 1.0.1 came out which solved the audio issue and allowed me to get the audio to my deck properly. I can't say for sure if it was still charging the iPhone at that point, but it definitely wasn't /draining/ it. Then, right around the time of the 1.0.2 update I started to notice significant drops in battery power when unplugging it after a drive to or from work (usually around 25 minutes). The audio still works fine, but the battery seems to drop at least 15-20% over that drive, whether I have any music playing or just have the iPhone idle but plugged in.
    So, software problem, maybe? I have a hard time believing something suggendly changed with the dock connector in my vehicle...

Maybe you are looking for

  • Client pool of connections to R/3

    Hi, I'm using this function to create a client pool: JCO.addClientPool(C_CLIENTPOOL_NAME, C_CLIENTPOOL_MAX_CONNECTIONS, C_ABAP_CLIENT, C_ABAP_USER, C_ABAP_PWD, C_ABAP_LANG, C_ABAP_HOST, C_ABAP_SYSTEMNR); Is there a way to avoid this pool being create

  • Enterprise Compliance Report not showing any Pc

    I've MBAM going for a day or to, i can see computers in the computer compliance report if I type the test computers in; however, i dont see any computers under the Enterprise Compliance Report. i am running mbam 2.0 sp1 on 2012, and sql on server 08

  • Using XBOX 360 with FIOS - How do you get it to be on TV

    Just got FIOS and we plugged in the XBOX into the cable box using component cables and do not know what buttons to push so that we can use the XBOX.  Tried pressing Input on the remote to no avail.  What do we do? Thanks

  • How can I customize af:query and af:queryCriteria

    Dear all, I have a question,How can I customize <af:query> and <af:queryCriteria/>, for example change "search" button label to "find" , Best regards,

  • Oracle 10g installation hangs at 25%

    hello i am trying to install oracle database 10g R2 on redhat 4 (the operating system DVD is supplied from oracle ); at 25% from the installation progress i got the following error: java.util.zip.ZipException: invalid entry CRC (expected 0x91380798 b