HT1687 What If you push the button and it doesn't do anything.

Ok.what if you are on the voicemail thing and don't know your Passcode and can't get off and the question mark button won't work...

What if you stop asking vague questions and stop referring vaguely to the buttons.
If you do not know the voicemail passcode, contact the carrier to have them reset it.
If the iPhone is locked up, reset it by pressing the home and power buttons.

Similar Messages

  • When you push the button VL02N that is in the  post output of goods)

    En inglés:
    Hello, in Peru is required to account when delivery by VL02N, the document is assigned a serial tax (calculated by ranges in a table z), the point is that I have not got any user exit is activated when you push the button VL02N that is in the (post output of goods), I reviewed the user exit and is not active MV50AFZ1 the button and the methods of the badi LE_SHP_DELIVERY_PROC (transaction SE18) were not actively using the button to count the output of goods VL02N transaction delivery
    Would know as one might do this?
    thanks and regards
    En español:
    Hola, en Peru se necesita que cuando de contabilize la entrega por la VL02N, se asigne al documento un consecutivo fiscal (calculado por rangos en una tabla z), el punto es que no he conseguido ningun user exit que se active cuando presiono el boton que está en la VL02N , (contabilizar salida de mercancias), revisé el user exit MV50AFZ1 y no se activa en el botón y los métodos de la badi LE_SHP_DELIVERY_PROC ( transacción se18) tampoco se activam con el botón de contabilizar la salida de mercancia en la transacción VL02N  de la entrega
    Sabrian como se podria hacer esto?
    gracias y saludos

    Hi,
    you can use the BADI " LE_SHP_GOODSMOVEMENT" in SE18 implement and see we have the Parameter IS-LIKP using which you can put values.
    Regards

  • EOS T3i when you push the button it clicks like it took a photo, but it does not

    No matter which setting you have it on it will not take photos unless you hold down the button and make it click several times like you are doing action shots.

    Yes, Mirror Lockup is one possibility. Also, if you have Long Exposure Noise Reduction enabled and are taking shots of 1 second or longer, the camera has to take two shots. First, it takes a "regular" shot, then a second,"blank" shot is made with the shutter closed. This second shot is then used to identify noise, which is subtracted from the first image. The second shot is the same length of time as the first one... so if you were making a 4 second exposure, all together it will take 8 seconds to make both shots when LENR is enabled. If you cancel the second shot before it completes (by turing off the camera or removing the battery), neither image is saved... so it seem like no shot was taken. Another setup that makes you press the shutter release repeatedly is bracketing.... There's exposure bracketing and white balance bracketing. Exposure bracketing allows you to set a range of exposures which will be taken, probably 3 total on your camera, and I think you have to press the shutter release three times for them all to be taken. Sometimes the shutter release button gets "gummed up" with finger oils, dust and grime, with use and over time. That can cause delays and problems when trying to take a shot. There are several places online that show how to clean it yourself (Google it... but be careful if you decide to try to do it), or you can send to Canon (they'll replace the button entirely), or have an independent repair shop clean it. ***********
    Alan Myers
    San Jose, Calif., USA
    "Walk softly and carry a big lens."
    GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & EXPOSUREMANAGER 

  • My iPhone was on, in a standby position. I wanted to see if I've got a message, pushed the button and found out that my touch-display is off. What can I do? It's just doesn't work. Is something wrong with my battery?

    Is anyone had the same problem? Can I manage it on my own?

    Would you rather upgrade to windows 8, BlackBerry or Android phones? Do you honestly think those don't have problems?
    You waited a lot and chose to buy an early production model. Mistakes happen all the time a factory retools and workers relearn new skills necessary to keep US happy.
    Exercise your rights.... Send it back for a new one. 
    In any case, I feel your frustration. Btw, I love Apple but use a Blackberry

  • DV4 wont start - push the button and power and hard drive lights flash

    I have a Pavillion DV4 1228ca that won't start
    When I push the power button the power and battery lights on the front of the unit flash until I release the button.
    What particular problem is this an indicator of?
    Thanks

    Figured it out... you have to make sure that the powerbar is turned on when you plug it into the wall in order to charge the battery....

  • TS1424 My grandson was playing temple run and tried to down load coins. The IPAD frozen so he kept pushing the button and I now have a forty dollar bill for coins. Can I get some kind of help with this?

    My five year old grandson was laying Temple Run and tried to down load extra Coins.  The IPAD froze up so he kept hitting the button to get his coins. I ended up with a forty dollar bill for coins. Is there any way of geting this corrected? 

    In app purchases can be restricted in Settings/General/Restrictions.
    For all other things, try to contact iTunes support, maybe they can help.
    Apple - Support - Express Lane - Product Selection

  • My ipad 3 stopped charging, not the adapter and reboot doesn't do anything.  I've tried all the tricks and different adapters and now my nearest Apple store is saying it just doesn't work and it'll be $300 to replace.  Only had it 1 yr and half.

    My ipad 3 suddenly stopped charging last week.  I've tried different adapters, to no avail.  I didn't drop it or spill anything on it.  I don't have tons of apps, so plenty of memory.  My husband took it to the Apple store for me and they tried charging it too even though I knew that wasn't the problem and then said it wasn't working (no kidding) and then told him it would be $300 to replace.  Seeing as I've only had it for a year and a half and it cost more than twice that to begin with, I'm a little ticked that it stops charging, a problem I know is very common according the all the message boards and they want to charge me $300.  I've always heard that Apple was so good to it's customers, but my iphone has been a nightmare, and now my ipad won't charge.  Also, I've tried the reset options I've read about and none worked.  Sorry, just really upset.  I thought I was paying all this money for better quality and now I feel foolish for having done so.  Anybody with any ideas I, or the genius at Apple haven't thought of?  Help is appreciated.  Thanks.

    May be some help on one of these links.
    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I'm ready to push the button and order a 2011 imac 21.5.  I'm getting the bigger hard drive and processor but I'm not sure about the ram.  should I order it with 8 instead of 4?  This is my first mac so bear with me.

    I need advice on whether to go from 4 to 8 on the ram for the imac I'm about to order.  I'm getting the higher model of the 21.5.  2011 imac.

    OWC is another source for high-quality cost-effective RAM -
    http://eshop.macsales.com/shop/apple/memory/

  • When push the button VL02N that is in the (post output of goods)

    En inglés:
    Hello, in Peru is required to account when delivery by VL02N, the document is assigned a serial tax (calculated by ranges in a table z), the point is that I have not got any user exit is activated when you push the button VL02N that is in the (post output of goods), I reviewed the user exit and is not active MV50AFZ1 the button and the methods of the badi LE_SHP_DELIVERY_PROC (transaction SE18) were not actively using the button to count the output of goods VL02N transaction delivery
    Would know as one might do this?
    thanks and regards
    En español:
    Hola, en Peru se necesita que cuando de contabilize la entrega por la VL02N, se asigne al documento un consecutivo fiscal (calculado por rangos en una tabla z), el punto es que no he conseguido ningun user exit que se active cuando presiono el boton que está en la VL02N , (contabilizar salida de mercancias), revisé el user exit MV50AFZ1 y no se activa en el botón y los métodos de la badi LE_SHP_DELIVERY_PROC ( transacción se18) tampoco se activam con el botón de contabilizar la salida de mercancia en la transacción VL02N  de la entrega
    Sabrian como se podria hacer esto?
    gracias y saludos

    Hi, the problem is:
    In Peru is required to account when delivery by VL02N, the document is assigned a serial tax (calculated by ranges in a table z), in the field LIKP-LIFEX the point is that I have not got any user exit is activated when you push the button VL02N that is in the (post output of goods), I reviewed the user exit and is not active MV50AFZ1 the button and the methods of the badi LE_SHP_DELIVERY_PROC (transaction SE18) were not actively using the button to count the output of goods VL02N transaction delivery .
    The user exit or badi  to save or modify the delivery (MV50AFZ1, LE_SHP_DELIVERY_PROC) not serve because is necesary account the delivery, and the serial tax  must be assigned to account  BOTTON (post output of goods)  for delivery.

  • My 6th gen nano will go to sleep after 1min. if I don't keep touching the sceen or pushing the buttons. How can I get this function to turn off?

    I can't relax and listen to music as my nano will go to sleep after just one minute of not touching it. This is really irritating and needs to get fixed. Can anyone help? I've read the manual and it doesn't say anything about my problem.

    Your nano is pausing playback when the screen goes dark. The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i
    PS: For more on this, with pictures, see this post: https://discussions.apple.com/thread/2765444?start=30&tstart=0

  • My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel, I tried the method where you hold the home and lock button lots of times and it hasn't worked! What do I do?

    My question won't all fit in but it says 'My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel. What do I do?'
    I've had this problem from about two weeks and I forgot about it, but today I wanted to play on it and remembered that it's not working, I've tried connecting it to iTunes via my laptop but I'm not to sure how to update it because I thought that might fix it, but no luck. I've tried the trick where you hold the lock and home button but nothing happened apart from it just went back to the apple logo and then to the frozen loading symbol/wheel. I need help!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    While using my Iphone 5, all of a sudden  black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

    Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

  • TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

    I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
    Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
    Please help!!!!

    You dont have any data on your phone yet right?
    If you dont connect your device to the computer and
    Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
    after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
    after that try again

Maybe you are looking for