HT1688 did updates on apps now phone won't turn on

Did an update on my apps and now my phone won't turn on. I have held doen the on/off button, I get nothing. Tried charging it and I get nothing. The phone was at 96% charge before this happened. Please help.

Try a hard reset:
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears, this can take 10 seconds or more, ignore the swipe to shutdown message.

Similar Messages

  • Android 5 update, battery died now phone won't turn on on xperia z1

    I started the lollipop update but my phone battery died halfway through. The phone now won't turn on. It did start charging, but now won't charge. It won't talk to my computer, it keeps saying USB not recognised and that it has malfunctioned. I have tried pressing the power button and volume buttons but not working. Tried the reset button, but it's not working. Phone won't turn on at all.

    Performing a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • HT1414 phone started vibrating and wouldn't stop...now phone won't turn on

    phone started vibrating and wouldn't stop...now phone won't turn on

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • Updated latest version now phone won't power on

    I just got a new iPhone 4 and updated the iOS. Now, the phone won't turn on. When I plug it in, it doesn't do anything either. There's no water damage or any other damage. What do I do?!

    Google
    fascinate won't update to eh03
    Read through the first  post that comes up in the search
    Follow instructions and you should be up and running in less than 10 minutes.
    The other option is to take it to Verizon and have them send you a phone if you are still under warranty
    Hope this helps

  • Updated ipod software now it won't turn on

    Had screen replaced by alleged professional.  Wouldn't take a charge or turn on after the screen was replaced.  Returned to servicer - got the IPod screen working. The person who owned the IPod could not remember her password.  We had to erase but first update software via Itunes.  Now back to the same problem as before wont' take a charge or turn on.  Please help.  Also if you live in South Florida, don't use Apple ER in Hallandale, Florida....

    Take it back to where you got it fixed or take it to another repair place. Apple will not help since someoe other than an Apple authorized place worked on it.

  • HT4623 I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!

    I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!

    You can try to restore it via recovery mode as show in the link below:
    http://support.apple.com/kb/ht1808

  • HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

    I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

    Zach Doody wrote:
    itunes says i cannot update the phone as it is in recovery mode.
    That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
    Restore it. You don't have a choice at this point.

  • HT5957 Updated my phone with iOS 7.0.2 and now my phone won't turn on. The only thing that it says on the screen is to connect to itunes. I connect it and try to restore it but it says it was corrupted and goes back to the itunes screen. HELP!!

    I updated my phone with the new iOS 7.0.2 and now it won't turn on. The screen says to connect to itunes and so I have. I have gone through the recovery mode and everything but a message saying the recovery was corrupted keeps popping up. I am scared this new update crashed my phone. Please Help!

    Hi there briana_webb82,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W. 

  • I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

    I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

    probably need pc or mac update for ios 6 on your home device

  • My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone 3GS was updating to iOS 6. It stopped updating halfway through the process. Now my phone won't turn on. Endless bootloop.

    My iphone 3GS was updating to iOS 6. It stopped updating halfway through the process. Now my phone won't turn on. Endless bootloop.

    Hello Apple, is there anyone out threr?

  • HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

    just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

    Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • I updated my phone to IOS 8.2. Now my phone won't turn on. I tried to reboot but it won't reboot

    I updated my phone to IOS 8.2. Now my phone won't turn on. I tried to reboot but it won't reboot

    The first two approaches is reboot by holding both the power and home buttons until the apple logo appears.  If that does not work, then the second, and more drastic approach is to use the recover mode to connect to the computer running iTunes per http://support.apple.com/kb/HT1808 and summarized as:
    But note you will need a backup of your content as the recovery mode erases all content and settings.

  • I just installed the iOS 7 update and now my phone won't turn on.

    I went to install the automatic update for my phone. Now it won't turn on. What do I do?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • I plugged my phone into my computer, it tried to update the phone and the update failed. Now my phone won't turn on.

    My phone won't turn on. The update failed when plugged into the computer and now it wants to restore it to factory settings. I don't want to lose everything. What do I do?

    Hi,
    With your iPhone plugged in can you see the Summary window?
    You may be able to restore from backup, if you have backups on your computer.
    If not, maybe you should try Recovery
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

Maybe you are looking for

  • How do I reduce the file size of a movie which is consecutive pictures?

    I have added audio to a powerpoint presentation and imported it into final cut pro. I want the smallest file possible, whilst retaining quality. The "movie" part is 30 consecutive pictures, so can I significantly compress the video in the file before

  • Moving bookmarks from old Vista drive to primary XP drive C in wifes computer

    Main computer with Vista lost the motherboard. The hard drive is fine. I have it installed in my wife's Vista computer. I need all my book marks out of the old hard drive but can't find them. I tried to use the profile program but it only will find t

  • Trigger a workflow for some condition

    Hi    When the status of the costing sheet has been changed to ‘Waiting for Approval’, system should trigger a workflow. The BOR which is being used is BUS2031. The events which can be used for triggering the workflow are CREATE & CHANGE. How do we m

  • Quicktime that works on a PC

    hi, I'm exporting minidv NTSC footage using FILE>EXPORT>QUICKTIME MOVIE The result is a "Final Cut Pro Movie File". This will open using quicktime player on my mac. I want to show the project on a PC though. The PC won't open the Final Cut Pro Movie

  • Odd optical drive issue

    I have a PowerMac G5 (PowerMac7,3) OS 10.5.8. My problem has existed over multiple operating systems which leads me to believe a hardware issue has arose. My problem: I wish to insert a disk into the optical drive. I press the eject button on the key