HT1688 Hello, my iphone 4s has aproblem with the sound. The speaker rings for incoming calls/messages etc. However for non of the apps the speaker sound works anymore. volumebuttons also dont show the volume bar. Anyone has any ideas
Hello, can anyone help Me? I have a problem with the external speaker of my iphone 4s. It works when i get calls, messages etc but nit for any app. The headphone does still work. The volumebuttons also do not show the regular volume bar. Any ideas please?
Clean the iPhone charging port with a clean dry toothbrush. Dust or debris is causing iPhone to believe it is in Dock station.
Similar Messages
-
I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?
I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved
-
I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
I can't get sound when my iMessages come through. The volume is on. Any ideas?
I Can't get sound when my iMessages come through. The volume is on. Any ideas?
Surely somebody knows what the problem is? Anybody.
-
My volume button seems stuck,i cant get the volume to go up,any ideas?
ON my ipad2 the volume button is stuck,i cant get the volume to go up.any ideas?
Thanks for the link ..so far I was only able to acces the utility disk, it says my disk needs repair but while attempting to repair it I get the following: Invalid record count...Any ideas on what should I try next????
I appreciate your help! -
I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?
Where exactly did you buy this phone?
Have you tried contacting your phone carrier to activate the phone?
Do you have a sim card? -
Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???
The Mac was recently upgraded so it is the Mac, or is it?
Looking for a common denominator: I'l start with wi-fi as the common communication medium.
Known:
A) Broken: iPhone —> wi-fi —> Mac.
B) Broken: iPhone —>USB—> Mac.
C) Broken: iPhone —> Bluetooth —> Mac.
D) Working: Mac —> USB —> other USB devices.
Unknowns:
E) Test Mac —> wi-fi —> a non-iPhone router.
F) Test iPhone —> wi-fi —> another wi-fi device.
Given not A, not B and not C either the Mac or the iPhone could be the culprit.
1) E | F : Non sequitur (deepens the mystery).
2) not E | F : The Mac is the common denominator.
3) E | not F : The iPhone is the common denominator.
4) not E | not F : All heck broke loose.
For case 1: It would be something on the Mac that prevents it talking to the iPhone through three media even though it can talk to other routers over wi-fi. That would be weird indeed, given the iPhone is talking to other wi-fi devices with no trouble.
For case 2: All of the Mac’s intranet media broken (wi-fi, Bluetooth, and wired-USB) and at least wi-fi works on the iPhone. Something weird is going on in the Mac.
For case 3: The iPhone router function is broken. Upgrade the iOS? Test using another iPhone?
For case 4: Throw everything in the trash and start over. -
ever since i updated software on my macbook pro, yahoo mail new version is constantly crashing with the spinning ball of death. any ideas?
What is the exact spec of the clips that cause the problem?
(Open one of the files with QuickTime and press Cmd+i to open the Inspector - then report back with the what it says).
Andy -
Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck. -
Sound not playing through iPhone 4s speakers in Music - the volume bar doesn't show up.
When I want to listen to music without headphones, the music doesn't play because the volume bar is absent. Why is this happening and how do I fix it?
Try resetting the iPhone by holding the Lock and Home buttons simultaneously for 10-15 seconds or until the phone restarts and you see the Apple logo.
-
I would like to send a form with the form fields locked but with the links still active. Any Ideas?
I'm new to creating fillable forms and I feel that this appoach would help to create HVAC proposals in quickly by editing a few fields within a PDF. I would like to then email the form that I created to my client, but I do not want them to be able to change the fields such as the cost of the job, yet I do want them to be able to open links that are embedded in the proposal. So far my approach has been to send them a flattened copy which essentially make the entire PDF stagnant. Any ideas would be much appreciated!
You can use the free selective flattening tool that's available here: http://www.uvsar.com/projects/acrobat/flattener/
-
TS1372 Hi my ipod is saying an unknown error has accured with the no.s 1413? any ideas?
Hi my ipod says an unknown error has accured with 1413? any ideas?
What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Have iphone 4sabout 2 months old .the battery will not charge any ideas?
my iphone 4s is only 2 months old but will notcharge any ideas gratefully appreciated.
How are you charging the device?
What cable are you using?
Are you plugging it into a wall outlet or a USB port on another device?
Have you tried more than one cable?
Have you tried more than one power source?
Have you tried restarting the device?
Have you tried resetting the device?
Have you tried resetting all settings?
Have you tried restoring from a backup?
Have you tried restoring as new? -
Ibook is not working with the new ios 5.01 any ideas why?
After updating to ios 5.01, Ibook is not working.
When selecting Ibook, the software tries to open and then closes immediately.
Any solutions?
ThanksRestart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit IBooks and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Help......every few mins my wifi disconnects AND i rec the black display with the apple.... Any ideas to resolve? I am connected to secured home internet and have not connected to cellular svc.
Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Unable to capture video from webcam in JMF in xlet
hi I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array? Thanks Rajesh
-
Can't open PDF files online???
Hi, I'm very new to this and haven't gone through all the history so maybe someone could point me in the right direction. I'm on latest Windows version but can't seem to open any pdf files through websites. I keep getting the message Internet Expl
-
Color dropped from pasted objects
This is a new one for me. About a month ago, InDesign CS3 began dropping color from some objects (we build ads for a newspring tabloid), when the ads are copied from one doc to another. A black or yellow background will turn transparent in the new do
-
Im trying to do an IDRA communication via a USB IRDA device through LabVIEW (8.6) to an external device. I know communications can be established because the IRDA comms works in a C based program using the same device and driver. When I do get Comms,
-
Hi All, Can we create additional Objects on the universe using MSAS 2005 Cubes??? Here I mean to say, I want to define the complex object defination on Universe using the objects which are available form MSAS 2005 Cubes... Kindly guide me for the sam