HT1688 How to undo forget this device

How do I reset the forget this device on an iphone 4S?

You do not.
If you have forgotten a device and want to add it back, simply do so.
Put the device in pairing mode, then go to Settings > Bluetooth and the iPhone will find it.

Similar Messages

  • How to undo forget this device

    I purchased a JBL Flip speaker and connected to my Apple iPad and it worked fine. By accident I pushed "Forget this device" and lost the device on my Bluetooth page. I have tried everything to try and get it back but it will not connect. Any ideas??

    Try resetting the iPad. Hold down the Home and p[ower/sleep buttons until the Apple logo shows up.
    You might also want to reset network settings to clear all data from the BT pairings. Sometimes that helps.
    Settings->General-:>Reset->Reset Network Settings.

  • How do I undo Forget this Device

    I was trying to re-pair my Jawbone bluetooth headset and thought I had to "dismiss" the old pairing by hitting the Forget This Device button. Now I can't get the iPhone to recognize my Jawbone at all. How do I undo the Forget setting? I have already reset all settings and I have already reset network settings..none of these worked. Can anyone help please?

    Do this:
    Delete the Jawbone's profile from your phone, turn the Bluetooth application in your phone OFF and then perform a reset on the iPhone by holding both the home and sleep buttons at the same time until the screen shows the apple logo, then release. Next, reset the Jawbone. To reset your Jawbone, first power the Jawbone on and make sure it is disconnected from the phone; the LED light will flash red every few seconds when the Jawbone is powered on and disconnected. Next, press the headset's buttons in the following order: NoiseAssassin, Talk, Talk, NoiseAssassin, Talk, Talk. For help locating each button, follow this link: http://aliph.custhelp.com/cgi-bin/aliph.cfg/php/enduser/stdadp.php?p_faqid=124&pcreated=1213119345.
    If the reset is performed successfully, the Jawbone will enter pairing mode (the LED light will begin flashing back and forth between red and white). At this point, turn your phone's Bluetooth ON and ask for it to search for a device. Once the Jawbone is found approve the pairing and connection and when prompted for a passkey enter four zeros (0000). The Jawbone should flash white every few seconds once it is on and connected. (Here's a link that will also help with the pairing process: http://aliph.custhelp.com/cgi-bin/aliph.cfg/php/enduser/stdadp.php?p_faqid=154&pcreated=1242753069)

  • How to undo 'forget bluetooth device?

    How do I undo 'forget bluetooth device' and have iPhone 3Gs try again to pair with my computer?

    can you give more details? Which device i should put into discover mode?

  • How to undo forget the device on iPhone 4

    Accidently I unpaired my wireless dock connected via Bluetooth by pressing " forget this device" on my iPhone 4. Software 4.3.3.  I tried to Reset the network setting but still it does not recognise my music dock. Pls help,

    "Reset Network Settings" forgets ALL BlueTooth and WiFi settings, not restoring deleted pairings.  You have to go through the pairing procedure from scratch.

  • I inadvertantly hit "Forget this device" on the blue tooth setting.  How can I get this device back on the list?

    I inadvertantly hit "Forget this Device" on the bluetooth setting.  How can I get the "deleted" device back on the list to connect to?

    Re-pair the devices and you should be good.

  • How to undo "Forget about this site" to restor my history???

    how to undo "Forget about this site" to restor my history
    i use this item in right click in history window
    what do i do?

    Using "Forget About This Site" will remove everything from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious if you need to keep passwords or other data from that site and you can't recover from that unless you have a backup of the affected files.
    It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

  • Please help, how can i reset my "forget this device" in bluetooth, without my restrictions passcode?

    Hi, i got some new bluetooth headphones which are really good but one time i accidentally pressed "forget this device", and now my ipod cant find the headphones. I did some reading online and i tried to "reset all settings" but i needed my restrictions passcode, which i have forgotten ( well actually i dont remember making one, because i know i would forget it ). Can anyone help me because at the moment i cant use my new headphones ?

    You will not like the answer
    Forgotten RESTRICTIONS Passcode
    - Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
    You have to either:
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod

  • HT1838 I have pressed forget this device on my iPhone 4,how do I retrieve the same device on Bluetooth ?

    I have pressed the forget this device on Bluetooth.How do I retrieve this device on my iPhone 4?

    Be sure Bluetooth is turned on in your iPhone. Then put the device you want to pair in pairing mode. The iPhone should discover the device again.

  • I paired my iPad Mini 3 with an Anker Bluetooth keyboard, then i hit forget this device. How do i re-pair them?

    I paired my iPad Mini 3 with an Anker bluetooth keyboard, then i hit forget this device. How do i re-pair them?

    Try resetting the iPad.   Hold down the home and power/sleep buttons for 10 to 15 seconds or until the Apple Logo shows up. Let the iPad reboot and then try to pair again.  Not data should be lost.

  • I cannot connect my Logitech keyboard to my IPad.  It worked well and now the Bluetooth device cannot 'find' the connection.  I have fully charged all batteries etc.  I may have said 'forget this device' how do I get it back again!! Help!

    I Cannot connect my Logitech keyboard to my IPad.  It has been working fine.  It may be that I highlighted 'forget this device' when using the IPad without the keyboard.  The Bluetooth cannot 'discover' the device.  All batteries fully charged.  Bluetooth lights up etc.  any ideas?

    Hey Montreal67,
    Thanks for the question. I understand that you are experiencing issues with a third-party bluetooth accessory. The following resource may provide a solution:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks,
    Matt M.

  • Geting blackberry back up after hitting 'forget this device'

    I was trying to use my blackberry software with my new blackberry that was sent to me without the usb lead to attach to the computer, so I tried using Blu-tooth.  It didn't work, but in the course of trying, I hit 'forget this device', trying to get the software to stop looking for the old device, which I don't have.  Anyway, I realised my Kindle lead would work so I attached it to the computer, which still holds all my old backups but the software won't open them & only recognizes the new handset.  How can I by-pass this or patch through this so that I can get my contacts and memos etc from my last back up of my last device? 
    Thank you!

    I am not sure is your previous device was the same type or really a different BB but, if I'm not mistaken, when you call the "restore backup" command in the desktop manager software, you should find somewhere the possibility to explore or open a backup file located elsewhere than the default one.
    Maybe you could give this a try and point to your previous backup files?
    Hope this helps.
    Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

  • Airport utility accidentally selected forget this device, and want to recover

    I am running Mountain Lion and using the AirPort Utility 6.1 to manage a Time Capsule.  I accidentally selected "forget this device".  How can I recover from this?

    If the device is still hooked up to your network, power off all other devices on the network in any order that you wish.
    Wait a few minutes
    Start the modem first and let it run a minute by itself
    Start the main router next that is connected to the modem that same way
    Keep starting devices one at a time until everything is powered back up.
    Now check AirPort Utility to see if the device has reappeared.
    If the device does not appear, you will need to "start from scratch" by performing a Factory Default Reset and then reconfiguring it again.

  • Reconnecting JBL flip to I phone after instructing the 4S 'forget this device'

    I have an I phone 4S which was paired and working well with JBL flip... The JBL flip however was not recognised by my kindle fire, I thought of disconnecting my I phone with JBL flip by "forget this device" and tried to connect the other device (kindle fire) un successfully. But now I am not even not able to reconnect the JBL flip back to my I phone!! As I had given instructed the JBL flip to forget this device, it does it appear in the device selection list. Please suggest how to solve this ?

    Hi dinesh_musalekar,
    You can use the following article to help you troubleshoot this Bluetooth issue:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Keep in mind that you may need to troubleshoot your third-party hardware as well by following the manufacturer’s troubleshooting instructions in order to fully resolve this issue. Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • I recently purchased a car stereo with Bluetooth capability. I paired my iPhone 4S with it and it wasn't working properly. I went into forget this device. Then found out it was something they did when they installed it. Now it won't pair again. Help

    I recently purchased a new car stereo with Bluetooth capability. I paired my phone with the stereo and it wasn't working correctly, did forget this device. Found out it was a problem with the radio. Now it's fixed and my phone won't pair with it again. How can I pair it again?

    You will need to put the car stereo back into discovery/pairing mode. That may mean you removing the initial pairing of the device. See the user guide for the radio on how to put the device into discovery/pairing mode, and if necessary, how to remove the original pairing. This support document may also provide you with some assistance. http://support.apple.com/kb/TS3581

Maybe you are looking for