HT1688 i forgot my passcode, and i have 60min to wait can you help me
hello, im at a hospital with my friend that was in a house fire so i cant reset my phone with a computer and i changed my passcode can you hellp me at all
If you do not know your passcode, then you cannot open the device.
You would have to restore.
Very sorry
Similar Messages
-
I have Iphone 5s and I have some problem how can you help me
myphone 5s .I am living in İstanbul and I went to Zorlu apple store in İstanbul yesterday they could not help to me they said your phone from USA and we are new apple store .we can not help to you I don't understand .apple internatial sytem and big company in world ..I am engineer and I need phone evertime .plaese help me apple to me .I have guarentee still 178 day .I am waiting help from you ...myproblem is blue screen on the phone when I open phone I saw after I can not use it.
<Edited by Host>Apple Warranty > http://www.apple.com/legal/warranty/
dogus61 wrote:
... apple store in İstanbul yesterday they could not help to me they said your phone from USA ...
The iPhone Warranty is only valid in the country of original purchase... Except for EU Countries... -
I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad
Hey salosawaya,
If you have never synced your device with iTunes and you forgot your passcode, you'll follow these directions:
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
via: iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Welcome to Apple Support Communities!
Regards,
Delgadoh -
HT1212 I forgot my passcode and I have tried everything
I forgot my passcode and I have tried everything
I have the same probelm and I have tried restoring it in recovery mode but it does not work
-
Hi, I have changed my password on my mini ipad after a few drinks and have forgotton the password, can you help please?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
I have iphone 4s and i want to unlock it can you help me ?
I have iphone 4s and i want to unlock it can you help me ?
Help is here, karason! Are you looking to unlock your phone for global use? If so, is it active on your Verizon Wireless account? You can review our unlocking policy here: http://vz.to/1v6UdcH
AndreaS_VZW
Follow us on Twitter @VZWSupport -
I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,this is from sjpt,
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID. -
I send a 2:37 video to my father thru imessage and i was connected to WIFI so was he, he wanted to send it to his brother but it keeps saying "video to long" and it wants us to trim it, we both have An iphone 5s and have ios 8.3 can you help?
Hi
You should ask your relative to physically take the iPhone to the store rather than shipping it because as diesel vdub has said:
"No Apple store will accept an iPhone shipped to them"
All you have to do is safely pack and ship your iPhone from the Philppines to your California-based relative.
HTH?
Tony -
my itunes store does not work because i do not have visa card? can you help me and advise please?
See this article for troubleshooting
http://support.apple.com/kb/ts1827 -
I can't Import .tif in illustrator CS4 anymore since Yosemite. Someone have this problem ? Can you help me please ?
Pat,
Did you reinstall after updating to Yoesmite?
If not, you could try to reinstall using the full three step way, and see whether things work.
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I'm running Indesign CS5 & it appears my Adobe PDF presesets have stopped working. Can you help?
It's under utilities in the window menu.
If the simple PDF works, that may indicate a problem with the file after all, but one way to to force the export to the foreground is to create a new Book (File > New > Book), then add the file that's giving you trouble to that book. (a Book is just a container format used to combine multiple .indd files into a single output)
From the Book panel flyout menu you can export to PDF and see what that does. Failure indicates a file problem, success a background task problem.
It's a little odd that you aren't getting an error message....
Anyway, if the problem is the file, try export in two halves. If both halves export, it's a system resources problem and not much you can do other than attempt to see what is using all the memory (probably some large complex vector object, or many vector objects) or just do the export in chunks that work and combine them in Acrobat Pro. If one half fails, try exporting half fo the failing half at a time. Keep dividing the failing half until you isolate a page with the problem. -
Question
I play Zuma Blitz on FB; Ever since I upgraded to Firefox 4 I can't play the game the darn frog pauses before shooting and it's a mess; you know it's what I enjoy doing and it needs to be fixed can you help me with this??? I am super frustrated ith the situationThanksUpgrading to firefox 5 and updating my plug-ins helped a bit. Frog is less 'sticky' now, but it's not solved the problem. Java needs to be up to speed or the frog goes into stasis....
-
My Lightroom 5.6 versie is defect, I have a serienumber. Can you help my for installatie?
HenkForgot to Mention i'm using Windows 8.1 - 32 GB Ram - i7-3970x - 2 SSd's in raid 0 for C Drive/ Storage drive is three ( 2 tb HDD in a raid 0 ) / Pictures Folder defaults to the Storage Drive not the Application drive .
Maybe you are looking for
-
I have been able to successfully INSTALL Adobe Photoshop CS3: Extended multiple times, however I have yet to actually successfully RUN the application. After installation, when I try to open the program, a window appears with "Adobe Photoshop CS3" at
-
How can i Watch yupptv on apple tv???
New apple tv - HD :-)
-
Panther OS X 10.3.9
This happened to me in 11/05....I lost the OX S Icon that's located next to the trash can in the dock. When you click on it, it takes you to the OS X help program. Can anyone tell me how to restore that Icon back into the dock it has at @ sign on the
-
HT5409 Working with video files with Mountain Lion is horrible!
This functionality is horrible. You can't import or delete individual files as you could with previous versions of the OS. Does anyone know of a work around?
-
Hi, I want to get all the elements in a sequence from my xml input. I do this. (FechasPago is the root node, and fechaPago represent the elements in the sequence) 1- get the number of elements in the sequence. last(bpws:getVariableData('inputVariable