HT1688 i get an network error message when trying to set up imessage
I get and "check your network connection" when tryig to set up Imessage.
Hello ashirdel
Check out the article below to get Messages activated.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Similar Messages
-
Why do I get an Activation Error message when trying to set up iMessage on my iPhone 4S?
Everytime I enter my apple ID in the settings of Messages, it just loads then gives an error message...
Hello ashirdel
Check out the article below to get Messages activated.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.
Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities -
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I get the following error message when trying to download ITunes on my computer running Windows XP - Error writing to file: C:\Program Files\Common Files\Apple Application Support\CFNetwork.dll
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2 -
On My Mac Pro Getting an unknown error message when trying to update apps
On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion
Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
Settings>Store>Apple ID - tap your ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sign in again -Settings>Store>Apple ID - sign in.
If that doesn't work either, reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I get the following error message when trying to instal in copy: “Creative Cloud Installer” can’t be opened because the identity of the developer cannot be confirmed.
Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder
Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process. -
Getting "line disconnected" error message when trying to monitor
Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer. Anyone else have this issue? Any suggestions on how to fix? I have reconfigured each camera with the router but still having the error message. I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).
Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras. It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup. However, starting on day three and on, it has worked very well.
The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs. All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about. I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days. It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log. -
I get the following error message when trying to restore settings on my iphone:settings could be restored due to an unexpected error occurred (3014). anyone will be able to help please? thanks
Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I receive an error message when trying to link my iMessage account to my Apple ID. My phone syncs fine, just my Macbook doesn't work. Same issue with Facetime.
HI,
In effect this is a DNS block.
You can do it.
You need to be in an Admin Mac User Account that has non blank password.
Go to the Applications/Utilities folder and open Terminal.
You should see your shortname (the one under the Little House icon) followed by the $ symbol
Copy and paste the bold text below into Terminal after the $ symbol.
sudo pico /etc/hosts
This will load the file "hosts" into and editor that works in Terminal.
Use the arrow keys to get to the line with Verisign in it.
Now type the # symbol and it will be added in front of the character that is highlighted.
The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
Now use CTRL and O keys together.
This Saves the changes.
Quit Terminal.
10:02 PM Wednesday; May 1, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Hi! Hoping someone might be able to help with an odd problem. I haven't found anything in the forums or the web that match my symptoms.
I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that. I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop. I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements. To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project). This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD. But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message. I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
I typically build both DVD and Blu-Ray images from the same material in the same project. I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built). And as I mentioned before, this is the first project on which I've even seen this layer break message.
Any suggestions would be greatly appreciated! I'd rather not recreate the project from scratch, but I'm worried that I may have to.
Thanks
JonThe total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
Be sure you "run as administrator" for dual layer projects.
Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
Also see these posts:
Neil Wilkes
http://forums.adobe.com/message/3466255#3466255
Neil Wilkes
http://forums.adobe.com/message/4054265#4054265
Neil Wilkes
http://forums.adobe.com/message/4054269#4054269
Jon Geddes
http://forums.adobe.com/message/4002647#4002647
shuchi shrivastava
http://forums.adobe.com/message/3905911#3905911
Jon Geddes and Neil Wilkes
http://forums.adobe.com/message/4003221#4003221
Maybe you are looking for
-
Cannot access 'BookstoreServlet' in J2EE tutorial
ok so i've successfully created a jdbc-pool and a jdbc-resource...once i deploy the war file for the bookstore demo, i get: HTTP Status 404 - Servlet BookStoreServlet is not available type Status report message Servlet BookStoreServlet is not availab
-
I can't add more than 33 bookmarks
when i try to add a new bookmark firefox automatic erase the last one i made. This is a big problem for me!!!
-
Siri can't connect to network - broke since yesterday
I picked up my iPhone 4S launch day and since then, with the exception of a few hours on Oct 17, Siri has worked great. That is until yesterday when Siri started complaining that it can't connect to the network. It's been doing so since then, even
-
Deriving user name from notification sent to expanded Role
Hi, We have created an adhoc role and sent notification to the expanded role. All the user associated with the role get the notification. Each use, at their will either approve, reject the notification. Is there any function, which we can use in post
-
ITunes won't connect to my Airport Express
I have four airport express used for airplay. Recently they all stopped working from the PC. I can stream music to them from iPad and iPhone. They show up under multiple speakers but are not options to select. Very frustrated! Please help if you