HT1688 i have forgotten my passcode im trying to restore my phone but its saying it cant because i need my passcode why?

i have forgotten my passcode and im trying to restore my phone with itunes but its saying i cant because i need a passcode why?

iOS: Forgotten passcode or device disabled after entering wrong ...

Similar Messages

  • TS4036 My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

    My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

    Welcome to the Apple Community.
    Yes, update first, Settings > General > Software Update.
    Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
    When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

  • HT201210 i am trying to restore my phone but its coming up with an error.

    i am trying to restore and backup my iphone 5 but its comung up with an error!

    If you are using an iphone, take it to your nearest apple shop if you have one available.  However make sure your current phone info ie, applications have been stored on your computer.  This happens automaticlly in the first phase of restoring your phone when it is retrieved from your phone. That way you don't lose your vital info and contacts once your phone has been restored.  Basically do not opt for restore as a new phone on your return from the Apple shop.  I had the same experience last Thursday.

  • HT201444 i try to reboot i tried to restore my ipad but it says it cant be restore

    i tried re charging
    i tried to hook to i tunes to restore
    it says it cant be restore

    You may have to then restore using the recovery mode, which will erase all data and content so backup first if you can.  The recovery mode is described in http://support.apple.com/kb/HT1808

  • I was using my iphone 4 and suddently there was a black screen. when i did hard restart there was apple logo only. now since two months its only stuck on apple logo. i tried to restore the phone but its not working.

    hey guys plz help me out with this. my pjone has stuck on apple logo since two months...

    Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743

  • Forgot password and tryed to restore on itunes but it says i have to login to my device

    forgot password and tryed to restore on itunes but it says i have to login to my device

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT201441 i am the first owner of my iphone i erase all data and i am trying to open the phone but its does the same thing like the first photo and i cant find my first apple id because i have deleted the email i used for it because i maked a new one pleas

    i am the first owner of my iphone i erase all data and i am trying to open the phone but its does the same thing like the first photo and i cant find my first apple id because i have deleted the email i used for it because i maked a new one please help

    Why do you need to access your email?  To reset the password?
    If you're trying to change the password, you don't need to go to your email.  If you know the answers to your security questions, you can reset it without using an email, as explained in the first section of this article: http://support.apple.com/kb/HT5787.  If you don't, you can contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

    Hi sunnylordz,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying. 
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Cheers,
    Mario

  • I have a macbook prob and I'm trying to clean it up. but its says i have 71GB used of "OTHER". how can i get a break down of this "OTHER"??

    I have a macbook prob and I'm trying to clean it up. but its says i have 71GB used of "OTHER". how can i get a break down of this "OTHER"??
    Thank You!

    The info from the below linked article may be of help.
    You have to download the app OmniDiskSweeper to do the job.
    http://pondini.org/OSX/DiskSpace.html
    Best.

  • HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    Welcome to the Apple Community.
    Are you following these instructions.
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • HT201269 I am trying to restore my phone, however it says that the iphone could not be activated because the activation server is temporarily unavailable. I have tried again a few times but still the same. Any suggestions?

    I am trying to restore my phone, however it says that the iphone could not be activated because the activation server is temporarily unavailable. I have tried again a few times but still the same. Any suggestions?

    Was your phone ever locked to a different phone carrier than the one your on now?
    If so how was your phone unlocked?
    Very rarely is the server unavailable.
    Is your phone jailbroken or was your computer used to jailbreak a device?

  • HT201413 i tryed to restore my phone but it turns of during the process and an error happens so what should i do

    i tryed to restore my phone but it turn off during the process and an error happens so should i do ?

    Hello there, VladlsSwag.
    The following Knowledge Base article provides some steps for troubleshooting your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT201210 I,m trying to restore my phone but I keep getting Error code 21.... help please

    I,m trying to restore my phone but I keep getting Error code 21.... help please     iPhone 4S

    Take a look at this Apple doc -> iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    You could just update or uninstall the security software on your computer and then test again.

  • I am trying to restore my phone but everyone I go to do it, it goes to Update which takes 2 and a half hours, and everytime it fails. Ive tried four times now. I'm trying to restore because it says my memory is full, when it is not. I'm so frustrated.

    I am trying to restore my phone, but when i go to do it on iTunes, it Updates to 4.3.3 however everytime the 2 and a half hour update finishes, it FAILS. So the update fails, and the restore fails. Its happened 4 ties.
    Im trying to restore my phone, because it says my memory is full when its not and an online solution says to restore. I cant restore because it wont let me update.
    Im so frustrated, i cant take any pictures, download any music or apps, and its really getting me down. Please can someone help.

    This error generally indicates a hardware failure.  Bring the phone to Apple for evaluation.

  • I need to change my region on the Itunes store, but it says i cant because i have an account balance of $0.05. How do I get rid of this?

    I need to change my region on the Itunes store, but it says i cant because i have an account balance of $0.05. How do I get rid of this?

    Click here and request assistance.
    (68319)

Maybe you are looking for

  • OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

    Hi all, I'm trying to upgrade my RAC installation. To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database). When i'm lauching OUI for the Clusterware 10.2.0.1 installati

  • Why do we use jap instead of servlet

    why do we use jap instead of servlet

  • Need documentation on weblogic server properties

    Hi, Could any one be so kind to help me knowing the weblogic server properties like weblogic.Name, weblogic.Rootdirectory etc and their documentation. Many many thanks to you. Warm Regards, Prasanna Lakshmi tallapaka

  • First Mapping

    Hello All: I am new to Warehouse Builder and have several questions. First, let me tell you a little about the environment I'm working in. These are the relevant (I hope) details of our installation: OWB10G Design Client (10.1.0.2.0) installed on my

  • Default EJB transaction timeout

    Within the weblogic-ejb-jar.xml it is possible to set: <transaction-descriptor> <trans-timeout-seconds>120</trans-timeout-seconds> </transaction-descriptor> which tells the container the maximum period of time an EJB method is allowed to run. Is ther