HT1688 I have updated and lost my apps and I can't access the apps that I do have.  I called AT &T today to no avail.

I have tried numerous times to do something with this I phone.  I do not use it much.   My husband download the updated ITunes but not only did it lose most of my apps it won't allow me to get into the ones that I do have. I have been having problems with this for awhile now.  Can't even take pictures and send them to my husband of the new Granddaughter!   This is getting upsetting because I don't use it that much.  But I would like to be able to send pictures of the grandbaby to my husband.  Please help!!!!!!!lol No seriously!

Yes you have to delete media to make the 2.7 GB available. When updating is done, the newer IOS only takes a max of 100 MB more storage than the old iOS. The iPod needs the extra space to do the installation.
You can update via iTunes. Just note that if you do all synced medial like a and music have to in the iTunes library.

Similar Messages

  • Using Picasa, some photos are randomly switched to older ones and I can't access the one that I want to work with.

    It's the weirdest thing. When I drag a photo from the SD card into Picasa library so I can edit it, the picture that shows up is a different one that I don't need to use. Instead of seeing the photo that I need, I am seeing a statue of Janice Joplin at the wax museum!  WTH?

    Thank you.  I'll try that.  I was able to re-take the photo thankfullyt, but I just don't understand how that could happen!!

  • Trying to update my apps but it keeps saying update my credit card,I don't want to use a credit card and I can't delete the one that's on my account

    Trying to update my apps but it keeps saying update my credit card,I don't want to use a credit card and I can't delete the one that's on my account

    If you're positive the information is correct, ask the issuing bank why the transaction is being rejected.
    You're getting this error because the store can not authorize the card with your bank.

  • I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

    I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

    Hi rgarden95,
    Can you please confirm the exact version of Muse you are opening the file with?
    To check the version of Muse, please click on help->About Adobe Muse CC.
    Regards,
    Akshay

  • Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    That's perfect, thanks.
    error writing to file: C:\Program
    files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
    itxib. Verify that you have access to that directory
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I have 2 different accounts at the same websites. Whenever I go to that website, one of my usernames prefills the UN field and I can't access the other account. I cannot overwrite my pre-filled username. Ideas?

    I have 2 different accounts at the same websites. Whenever I go to that website, one of my two user names (always the same one) pre-fills the user-name field and I can't access the other account. The website rightfully rejects my password. I cannot overwrite my pre-filled user-name because the second I hit enter to logon, the original user-name rewrites itself into it's field. Neither of the user names is being saved by firefox anywhere in the "tools"; Options, security, advanced or privacy menu fields.
    I did notice that that website has installed a cookie onto my computer called "_rememberme" which contains the user-name that is plaguing me.
    This is a website that I access for very sensitive and important information and I must have both accounts accessible at different times.
    Thanks, Joshua
    XP, sp3; FF3.6.3
    == This happened ==
    A few times a week
    == I added the second account on this website.

    You need to clear that remember me cookie and make sure that you remove a check mark to remember you on that website.
    Tools > Options > Privacy > Cookies: "Show Cookies"
    You can disable the automatic fill of a name and password.
    See:
    http://kb.mozillazine.org/Password_only_filled_after_entering_user_name
    http://kb.mozillazine.org/signon.autofillForms
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

  • Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss"  button at the botom of the screen.

    Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss" button at the botom of the screen.
    I appreciate if you could provide me support to solve this problem especially it consumes the battery a lot.

    Another post originally dated 5th Feb, 2012 with a slightly different unheard of error "%7D/JC".
    https://discussions.apple.com/thread/3710903?start=0&tstart=0
    The user also claimed that he didn't meddle with iOS. No solution could be found though.

  • It was updated and i can't see the web page. It is only a white page. Android for tablet

    I was able to see a webpage which starts with https. However the browser was updated and 1 can't see the web page anymore. I can see it in chrome but I need Firefox due to the plug ins.

    I installed FLASH PLAYER and it doesn´t work. Everything started when Firefox was installed automatically. Does anybody knows how to install a complement in google chrome for android (it is a scanned document) since i could not open the web page in firefox or dolphin, I used chrome but now I cannot see the content. I already installed PDF reader. I do not know how to enable the plug in. I read that I should go to
    chrome://plugins but this page doesn´t not exist.
    How can I enable it in a tablet android?
    Thank you in advance.

  • HT201250 I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

    I have done my back up using time machine, now I have a new mac and I need to access the files that I had saved from my old mac. How can I do that?

    Use Migration Assistant on your new Mac:
    Click Continue:
    On the next screen, choose your Time Machine backup disk.
    Don't bother to migrate Applications unless you know they will work on your new Mac. For example, PowerPC applications won't work. Just migrate your user account which will copy all your photos, music, movies, and other documents.
    Note: you will not be able to migrate the information to same account in which you are already logged in. Migration Assistant will tell you that and recommend what to do. It can migrate the information to a new account, but you will have to give it a name you might want to change later. One way around this is to create a temporary account, log in to it, and run Migration Assistant which will replace your normal account. Then, log out of the temporary account, log in to your usual one, verify everyting works as you expect, and delete the temporary one.
    All this can be avoided when you set up a brand new Mac by running Setup Assistant which essentially does the same thing to create your new account, but most people are too excited to do that and elect to migrate later.

  • My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset

    My LG Optimus Zone is having software issues and I can't access the Recovery Menu for a Factory Reset. It was working fine until I went to activate it and update the PRL. It turns on, but Freezes on the LG Logo. it currently goes into the LG Download Mode, and When I restore with LG's Mobile Support Tool, It finishes, reboots, and stays at the boot Logo. I was wondering if I can possibly get a replacement phone? This is a little upsetting, as i was hoping to have it transfered from prepaid to postpaid service next month

    Who is your Internet Service Provider...?
    Do you have any computer which is able to go online wirelessly...?
    Have you forwarded any ports on the router...?
    Try to adjust the wireless settings on the router and check...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    Under the Wireless tab,Change the SSIS(Network Name) to some unique name.Change the Channel Width to 20MHz only and Channel to 11,click on save settings.Under the Wireless Security subtab,Change the Security to WEP and type any ten digit number in key1 as the network security key,click on save settings..Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
    Also,for the gaming system,check this link.

  • My apple-ID is blocked, and I can't access the e-mail I use for my apple-ID so I can't restore the account. What should I do?

    My apple-ID is blocked, and I can't access the e-mail I use for my apple-ID so I can't restore the account. What should I do?
    I can't remeber my security questions, and I can't ask for a new password because I can't log in to the email because it got hacked...

    Have you tried logging out of your account on your iPod by tapping on your id in Settings > iTunes & App Store and then logging back in to see if that 'refreshes' the account on it and if it then works ?

  • HT201441 My cousin's iphone  gave it to me but the bad thing is, it has a icloud and i can't access the phone. my cousin got amnesia so he didn't remember anything to this phone. I entered the password so many times so that i can't activate the icloud acc

    My cousin's iphone  gave it to me but the bad thing is, it has a icloud and i can't access the phone. my cousin is involved to a motorcycle accident and he got a amnesia so he didn't remember anything to this phone. I entered the password so many times so that i can't activate the icloud account. Please, I need to access this phone immediately for emergency purposes. You are my only hope. The phone model is a1429 Verizon (Factory Unlocked). P.S apology for my bad English.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    jennfromla wrote:
    ... I have never plugged it into a computer...
    Note:
    All Data will be lost

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Just purchased a MacBook Air and would like to access the LR5 that is installed on my iMac desktop

    I just purchased a MacBook Air and would like to access the LR5 that is installed on my iMac desktop.  How do I do tha

    Since you have another Mac, you could share it's DVD drive in System Preferences > Sharing.
    Then use Remote Disc found on the MBair's finder's sidebar.  This will mount the DVD in your old Mac to the MBair. 
    http://support.apple.com/kb/HT1777
    Regards,
    Captfred

  • Downloading songs to my iphone duplicates and i can't access the duplicate songs.

    Downloading songs to my iphone duplicates and i can't access the duplicate song.

    My first advice is "Back up the device, then have it replaced."  Second item of advice, "Don't forget your passcode."
    One of the purposes of the lock button is to recover from certain software failures.  Without the lock button, such a recovery is nearly impossible.  My advice would have served you best when the malfuction first developed, not after you forgot your passcode.

  • My email only on this macbook air(10.8.5) gives me this message" mac 10.8.5  your service license has expired" and I can't access the new emais. Help!

    My email, only on this macbook air(10.8.5), gives me this message
    "your service license has expired" and I can't access the new emais. Help!

    Yes.  Other browser do work.  I played with preferences with in Google and it seems to be working.  I''ll use it for a few days and see if it continues to work.

Maybe you are looking for

  • How do i use ibooks for saving my lecture notes / power point slides please?

    Hi, how do I use ibooks for savng / storing my lecture notes on please? (on either a iphone or ipad). Also, can I save powerpoint slides to it too? thanks.

  • JCombo in JTable

    Hi all I have looked at Steve and Franks Different Examples on this subject and have as yet not been able to implement right. in some instances i have been able to get it to change in the database but not in the column ie does not render the value ba

  • IC webclient question

    Hi Experts, I have added two standard fields to Complheader view. The fields that I added were not part of exisiting contextnodes. The fields were in BTsalesset Bol entity which is related to BTAdminH and we had BTadminh as page attribute. So I have

  • Why are cookies not updated in the request when meta refresh is used?

    I've written a web site that uses IIS Forms Authentication. It's configured to use authentication tickets with a sliding expiration. FireFox allows the ticket to expire while it works fine with Internet Explorer. The web site uses a Keep Alive page t

  • How to map different fields to same repeating/Same field in XSD

    Hi, I am using the Transform activity in a BPEL Process, my source is a Database table and the target is the and XSD file. Now the requirement is to map 3 different fields from source to a single field in the XSD. In the final xml file the tag name w